Big Package Force Automatic Packing Machine

Big package force Automatic packing machine




1.Brief introduction
Automatic balers principles and characteristics: the use of brand baler technology, is designed for the whole two-circuit control, more stable and reliable than ever single circuit control performance, dual-circuit control allows the machine to reduce the load inside the electrical panel, The structure of each circuit runs between packer navigate more stable. We, as baler manufacturer, superior performance, quality, more reliable, convenient and easier to debug test back with a clutch first photoelectric control. The automatic balers works by taut, heat capacity, cutting, gluing complete package. Specializing in the production of a wide range of use strapping plant, regardless of the size of the packaging, do not adjust the machine to be packaged, packaging packer is a mechanical structure, some imported baler parts, after the blade is stable and reliable, easy to adjust, balers and reasonable prices.
 

2.Technical parameters
PP belt: width 9-18mm thickness of 0.5-1.0mm
Power: 850W
Mechanical dimensions: W1410 * D600 * H1540MM Power: 1PH-110V / 220V (50 / 60HZ) 3PH-220V / 380V (50 / 60HZ)
Strapping speed: 2 seconds / second
Packing size: minimum 100 × 30mm maximum 850 × 600mm
Packing intensity: 5-80kg
Bow frame size: Minimum W850 × H600mm maximum W2850 × H1800mm
Weight: 215kg
Controller: PCB
Table height: 815mm


3.Technical Description
1. Using the guide pulley quality materials to effectively solve the problems of ordinary plastic cassette guide pulley belt wear and PP
2. The use of a high-strength hardness of the blade 65, greatly improves the ability to cut the belt and the life of the blade
3. Using a resin casters, more convenient mechanical movement, in the long casters will not deform under load
4. The use of aluminum alloy frame, the body shell is made of a modular way constitute a carton packer can determine the size of the bow frame depending on the size of packaging material.
5. All parts are used for precision machining NC machining equipment. Automatic centralized solid resistance movements and connections baler parts are well protected. See more Packer explained the other series.




4.Design Features Editor
1. IC Design: The new circuit design, packer uses plug-in circuit board to control the entire action packed and hot head temperature, circuit board replacement is quite easy, baler service convenient.
2. instant heating, Packing: Innovative high speed hot melt system design, within 5 seconds to play hot piece of work can make PET packing strapping into the best state.
3. The automatic shutdown devices, power utility: When packing operation is completed, the operation within 60 seconds longer, balers compact design, the motor will stop automatically enter standby mode.
 
4. The new brake design: Brake balers use reel of special spring design to ensure a smooth feed with no noise, balers reasonable prices.


5.Precautions
1. Make sure the power used by the machine, do not plug the wrong power supply. The machine uses a three-phase four-wire system. Flowers wire is the ground zero line for leakage protection.
2. Do not operate the first hand through the strap runway.
3. Do not touch the heating plate.
4. Do not wash the machine with water when wet workplace, the operator Never work barefoot.
5. Keep the reservoir when the machine is not used within the tape cartridge tape rewind reel, so as not to deform the next time.
6. Do not lose with roller surface viscous oil
7. Remember to unplug the machine when not in use.
8. Do not arbitrarily replace parts on the machine.
9. The main components should always lubricated with oil.