UK Remote Control Socket, Wireless Remote Control Socket, UK Remote Control Power Sockets, Remote Control Electrical Sockets

Instructions
The wireless Remote control socket,RF Remote control socket.Refers to one or more than one socket circuit wiring can be inserted into the seat,through it can be inserted into the various wiring,easy to connected with other circuits.The power socket is the electrical equipment for household appliances provide the power supply interface.Wireless remote control socket is to be charged with non-contact remote control target.Widely used in home appliance electrical appliances, lamps and lanterns, home appliance field.Wireless remote control and wireless transmission system is compared with the cable and infrared device improves the mobile degree of freedom.Thus make the wireless remote control and wireless transmission system widely used in industrial area.
 
This wireless remote control socket design of manual and remote control two kinds of working mode.The round button on interface is the manually open key,also the learning key of  the remote control code.Remote work mode has two work modes can be adjusted (self-locking and interlock).Through the study of interface learning button to switch,combined with many kinds of wireless remote controls.
Self-locking working mode: the study with the same button on the remote control code, the same button click open, then click close
Interlock work mode: with two different buttons on the remote control code learning, press a key is on, press another key is off
Working frequency: 315 MHZ weight: 0.115 KG working voltage: AC220V interface on the back side: 3 feet  Max.Load:less than 2000W
The method of self-lock learning the code:
First put the wireless remote control socket plugged into electricity on the ordinary household board.Can use the remote control socket connected to an electrical manual test socket if it is normal electricity work.Then long press the learning key about 3 seconds.Remote control socket interface study indicator is on.Loosen, press any key on the remote control two times immediately,Learning indicator lights flashing out after three times,said learning success.
The remove method:
Long press the learning key on the remote control socket interface to learn about 15 seconds, the indicator light from on to off,said remove success.
Interlock learning method of code:
Long press the learning key about 3 seconds,remote control socket interface study indicator is on,Loosen, immediately press any button on the remote control,then press another key on the remote control.Learning indicator light flashing out after three times,said learning success.