ข้อมูลพื้นฐาน
พิมพ์
ดิสเพลสเมนต์เซนเซอร์แบบแม่เหล็ก
ชนิดสัญญาณเอาต์พุต
ชนิดดิจิตอล
การเคลื่อนไหว
การเปลี่ยนตำแหน่งแบบเส้นตรง
การรับรอง
ISO9001, CE, SGS
Operating Temperature
-40~+85 C
Output Signal
24, 25, 26 Bit Binary or Gray Code
Measurement Range
25-7600mm
External Tube for Protection
Stainless Steel 304L
Flange Fixed
Stainless Steel 304L
ข้อมูลจำเพาะ
CE, ISO9001, SGS, ROHs
ที่มา
Nanjing, Jiangsu, China
รหัสพิกัดศุลกากร
8537109021
คำอธิบายสินค้า
High Quality:
1. Turnkey Service
2. CE, ISO9001, RoHs
3. OEM Service
4. Accept small order
RH-SSI Magnetostrictive Transducer
Introduction
RH series linear position sensors which are of circule tube and pressure-resistantance, are applicable to the built-in installation of hydraulic oil cylinder. The features: Anti-interference ability, good environmental tolerance, neverwear, high precision, superior resolution, replacement by convenience, online intelligent diagnosis and other special advantages;
Analog outputs includee: Dc current 4 ~ 20 mA (forward, reverse) and dc voltage 0 ~ 10 V (forward, reverse); SSI outputs includee: 24, 25, 26 bit binary or gray code; Measuring start-stop points can be adjusted in full range, the products can be widely used in metallurgy (continuous casting and rolling), petrochemical, port machinery, hydraulic pressure tester, water conservancy and electricity, etc.
Feature
>External installation, easy to use.
>Absolute location output, no need to return to zero.
>Non-contact measurement, no physical deterioration forever.
>High resolution, analog output 16 binary digit D/A, infinite resolution.
>Nonlinearity degree, <± 0.01%F. S.
>Repeatability precision, < ± 0.001% F. S.
>LED for sensor diagnostics
>Modular design, convenience to replace.
>Low power dissipation, good for reducing the system temperature drift.
Specification
>Measurement range: 25-7600mm
>SSI signal: 24, 25, 26 binary digit or Gray code
>Transition speed: 70kBd~1MBd
>Resolution: 0.5/1/2/5/10/20/50/100 um
>Nonlinearity degree: <± 0.01% F. S. (min. ± 40μ M)
>Repeatability precision: <± 0.001% F. S. (± 1digit figure)
>Structure&Material:
Head Aluminium alloy
External tube for protection Stainless steel 304L
Flange fixed Stainless steel 304L
Electric feature
>Outgoing line: Water-proof connector, or 6 lamp pith aircraft connector
>Input voltage: 24VDC(-15/+20%)
>Working current: <60mA(changing depend on F. S. )
>Polarity protection: Max. -30VDC
>Overvoltage protection: Max36VDC
>Insulating ability: 500V(between the signal GND and the housing)
>Fault indication: Red & green LED pilot lamp.
Working condition
>Magnetic speed: Random
>Ambient temperature: -40° C~+85° C
>Humidity/Dew point: Humidity 90%, No dew
>Temperature coefficient: <30ppm/° C
>Grade of electrical protection: IP67
>Anti-pressure ability: 35MPa(Continuously)/70MPa(Peak value)
Order Note
1. It is recommended that the sensor should be installed as Suspended Mode to avoid face tight press and avoid affecting sensor stability.
2. Please pay attention to protect the diaphragm to prevent any damage or bad performance.
3. If the working temperature of Viton rubber exceeds the temperature of the rubber specification or be applied in critical environment, please contact us.
4. The material of measuring medium should be compatible with the stainless steel. If it is corrosive, pls specify its material in detail.
5. All specifications are subject to change. Contact Gaohua for specifications and engineering drawings that are critical to your application. Drawings contained in this document are for reference only.
Order flow chart
A) Inquiry ----Please tell us the specification you need.
B) Determine the parameters ----- Do or can not do.
C) Sample -----If we can do them, we will send the sample to you, but freight is born by you.
D) Sample time ---we will arrange the samples in 1-3 working days.
E) Express way ----UPS, DHL, FedEx, EMS and so on, please tell us the express way you need.
ที่อยู่:
No. 66 Qixia Avenue, Nanjing Economic & Technological Development Zone, Jiangsu Province, Nanjing, Jiangsu, China
ประเภทของธุรกิจ:
ผู้ผลิต/โรงงานผลิต
ขอบเขตธุรกิจ:
อุปกรณ์และส่วนประกอบอุตสาหกรรม, เครื่องจักรการผลิตและแปรรูป, เครื่องมือและเครื่องวัด, โลหการ แร่ และพลังงาน, ไฟฟ้าและอุปกรณ์อิเล็กทรอนิกส์
การรับรองของระบบการจัดการ:
ISO 9001
แนะนำบริษัท:
บริษัทหนานจิง Gaua Technology จำกัดตั้งอยู่ในเมืองหนานจิงจังหวัดเจียงซูประเทศจีนและสร้างในปี 2000 โดยเป็นมาตรฐาน ISO 9001: 2008 CE และมาตรฐาน RoHS ผู้ผลิตและผู้ส่งออกระดับมืออาชีพ ( ส่งออกไปยังประเทศต่างๆมากกว่า 20 ประเทศ ) ปัจจุบันโรงงานของเราครอบคลุมพื้นที่ประมาณ 20 ตาราง 000 เมตรในขณะที่เรามีศูนย์พัฒนาเซนเซอร์ที่ทันสมัยศูนย์การผลิตศูนย์การกรองน้ำศูนย์ทดสอบและศูนย์ประมวลผลโลหะของเราเอง
เรามีสิทธิบัตรของตัวเองในด้านเทคโนโลยีหลักและเน้นไปที่เซนเซอร์แรงดัน R&D ซึ่งผลิตเซ็นเซอร์ / ทรานสดิวเซอร์ / ตัวส่งสัญญาณได้หลากหลายรูปแบบ ( เช่นแรงดันอุณหภูมิความชื้นอัตราเร่งมุม ระดับฯลฯ )
ด้วยคุณภาพที่เชื่อถือได้และราคาที่สมเหตุสมผลผลิตภัณฑ์ของเราถูกนำไปใช้อย่างกว้างขวางในการวัดกระบวนการและการควบคุมเครื่องจักรทางวิศวกรรม / ยานยนต์ / การแพทย์ / การขนส่งทางรถไฟ / เหมือง / อุตสาหกรรมอินเทอร์เน็ตฯลฯ
สำหรับโครงการสำคัญที่อ้างอิงถึงเซนเซอร์หลายตัวเรามีบริการแบบครบวงจรรวมถึงเซนเซอร์ที่ปรับแต่งเองได้การผลิตมาตรฐานและการจัดซื้อตัวแทน
เราหวังว่าจะได้ติดต่อธุรกิจกับคุณ !