Yrkk High-Voltage Wound Rotor Motor

• แอปพลิเคชัน: อุตสาหกรรม
• ความเร็วในการทำงาน: ความเร็วคงที่
• จำนวนสเตเตอร์: สามเฟส
• สายพันธุ์ต่างๆ: Yr Wound Rotor Slip Ring Motor
• โครงสร้างโรเตอร์: ชนิดขดลวด
• การป้องกันตัวเครื่อง: ประเภทการป้องกัน
• ไม่ใช่ ของรุ่น: YRKK6301-10-560KW
• จำนวนเสา: 10
• โหมดเริ่มต้น: Serial Rotor Resistance Starting
• การรับรอง: ISO 9001, CCC
• แบรนด์: China Motor
• แรงดันไฟฟ้า: 3kv.3.3kv.6kv.6.6kv.10kv.11kv
• การป้องกัน: IP44 หรือ IP54,IP55
• คลาสสมาชิก: F
• กำลังเอาต์พุต: 560kw
• วิธีการระบายความร้อน: IC611/IC616
• หน้าที่: S1
• ความถี่: 50Hz/60Hz
• ขดลวดสเตเตอร์: ทองแดงสีแดง 100 เปอร์เซ็นต์
• ขดลวดโรเตอร์: ทองแดงสีแดง 100 เปอร์เซ็นต์
• การขับรถ: โรงบดรีดเหล็ก , โรงงานปูนซีเมนต์ , โรงงานบดม้วนน้ำตาล
• แพคเพจการขนส่ง: Plywood Case
• เครื่องหมายการค้า: ZCL
• ที่มา: Shijiazhuang, China
• รหัสพิกัดศุลกากร: 8501530090
• กำลังการผลิต: 500 Sets Per Month

คำอธิบายสินค้า

The wound rotor motor is a slip ring three-phase asynchronous motor. The power rating, installation dimensions and electrical performance of this type of motor comply with the relevant IEC standards. The basic installation method of the motor is the horizontal bottom angle (IMB3), the working system is the continuous working system (S1), and the wound rotor is made of Class F insulation material.
The winding rotor motor has two types of bearings: rolling bearing and sliding bearing, depending on the motor power and speed. The rated frequency of the motor's power supply is 50Hz, the rated voltage is 6000V/10000V, and the basic type of protection is IP54. The motor slip ring housing can be protected to IP22 or IP23. Other voltage, frequency and degree of protection motors are also available upon request.
Wound rotor motors can be used to drive a variety of different machinery, such as compressors, pumps, crushers, cutting machine tools, transportation machinery and other mechanical equipment, in mining, machinery industry, petrochemical industry, power plants and other industrial and mining enterprises. Used as the prime mover. The motor used to drive the blower, coal mill, rolling mill and winch should indicate the purpose and technical requirements when ordering, and adopt special design to ensure reliable operation.

Center height range: H355 ~ 1000mm
Power range: 220kW ~ 10000kW
Number of poles: 2/4/6/8/10/12
Rated voltage: 3000V/6000V/6600V/10000V/11000V
Rated frequency: 50HZ/60HZ
Protection level: IP54 or IP55
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC611/IC616
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).

The wound rotor motor is a slip-surrounding three-phase asynchronous motor, which can increase the starting torque at a small starting current. The motor is suitable for applications where the capacity of the feeder line is insufficient to start the squirrel-cage rotor, the starting time is long, the starting is frequent, and the small-range speed regulation is required. This series of motors has the advantages of high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, convenient installation and maintenance.


The company has large-scale laboratory, intelligent CNC winding machine, CNC rising machine, automatic wrapping machine, VPI high pressure vacuum immersion system, large-scale dipping paint drying furnace, 60 tons test platform, large vertical car, milling machine, grinding machine, Each type of dynamic balancing machine, double-feedback test and detection system with 6MW (12MW) motor and other motor production professional equipment more than 500 sets, sound mechanical equipment processing capacity, to lay a good foundation for customers to improve good quality motor products.


Our company's motor manufacturing factory adheres to the concept of green, efficient and energy-saving production service, pays attention to the harmonious development of internal and external environment, builds environmentally friendly motor manufacturing enterprises, strictly implements motor standard process, and selects high-quality energy-saving materials to ensure the quality of motor products.


ZCL Electric Motor Technology Co., Ltd. is a company mainly engaged in the manufacture, research and development and sales of motor products. The company has many types of motor products, including IEC standard motors. It is a professional IEC motor manufacturer. Related motor products have passed the product certification in China, the United States, Canada, Europe, the Middle East and other regions, and the products are exported to all over the world. Companies adhere to the "focus on products, service" business philosophy, is committed to improving the quality of safe motor products and services for customers around the world.