Idutex Ds810 OBD2 Professional Full System Diagnostic Tool Scanner Code Reader Car Auto Scanner ECU Coding Active Test

The Idutex DS810 diagnostic scanner can establish a data link to all systems and subsystems of the vehicle being serviced to:
-Retrieve ECU information of the tested control units including unit type, version numbers, and other specifications, etc.
-Read & erase DTCs to locate problem areas and clear the codes.
-View Live Data of each parameter item.

The following is a list of modern vehicle systems that this scan tool can get access to:
-Engines / Auto Transmission / Airbags / Immobilizer / Key Coding / ABS / Cruise Control / Instruments / Self Leveling Suspension systems
-Seats / Doors / Gateway / Steering Angle / Air Suspension / Body Systems / Electronic Power Steering & Motor Assisted / Power Steering / Tyre Pressure / Rain Sensors / 4WD System
-Stabilizer / Intelligent Parking Assist/Door Motors / Audio Systems / Air Conditioning / Tiptronic / Anti Theft / Soft Top / Headlamp Leveling / Central Locking / Automatic Clutch / DPF Reset
-Electric Windows / Plip Programming / Heated Rear Window / Xenon Headlights / Wash Wipe / Fuel Burning Heater / Transfer Box / Seat Memory / Oil Life Service Reset / Sliding Doors / Electronic Throttle
-Navigation System / Rollover Sensor / Cruise Control / Multi Function Steering Wheel / Aux Heating / Electronic Parking Brake / Clutch Electronics ... and more.

This comprehensive scanning process is able to locate the faulty systems and retrieve the DTCs related easily. So you can work on all parts of the vehicle systems to enhance the performance, save energy, reduce emissions, and everything else.

Iudtex DS810 provides many powerful special functions for precise test result of vehicle health status.

You can find 15 kinds of commonly used reset functions in the Hot function menu, and more special functions for each brand car from  Diagnosis menu.

1.Oil Reset 

Close the oil service light and reset service mileage & service interval after replacing the engine oil.

2.Steering Angle Calibration

-Clear memories of the previous steering angle sensor and store the replaced one.

3.Electronic Parking Brake Reset

-Reset the new electronic parking brake for braking wheels safely again.

4.Battery Register & Battery Maintenance

-Perform a reset on the vehicle battery for clearing the fault information and re-match the battery.

5.ABS Bleeding

-Get a firm brake pad after air exhaustion.

6.Electronic Throttle Position Reset & Learn

-Initialize the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately.

7.DPF

-Clear particulate matter from the DPF filter to stabilize the filter performances

8.TPMS 

-Relearn TPMS sensors so that new sensors can be recognized by ECU.

9.Anti-Theft Matching (IMMOBILIZER)

- Add a new programmed key. PIN code is required.

10.Injector matching

-Write the new injector numbers into the ECU for accurate communication and injection control.

11.Gearbox Matching

-Test the gearbox based on the driving conditions after the gearbox is disassembled or repaired, for a more comfortable and ideal shift quality.

12.Sunroof Service

-Set the sunroof lock switch to be on / off according to weather, temperature, and memory.

13.Suspension

-When the body height sensor and control module in the air suspension system are replaced or the level of the car is wrong, this function needs to be performed to level the body height sensor.

More Functions