Screen Printing Pallet tape for Pallet Masking
HANZE LTD--Pallet Paper/tape holds T-Shirts & other textiles securely on the pallet with pallet mask cloth and in place for printing while lasting through long production runs. Keeps textiles in register avoids wrinkles and misprints. Simply cut to size . Put in place on the pallet and remove protective sheet to adhere.
Pallet Protective tape constructed with white translucent latex saturated paper and water based natural latex.The main application is the protection for textile printing pallets from ink spills, leaks and spray adhesives.
Advantage:
1.Easy to Laminate:Good in adhesive,No re-laminated,Cutting is simple, not curl
2.Easy to Remove:Tear off in complete piece,Easy to replace, no wastage Protect platen, reduce the solvent damage.
3.High temperature:High temperature conditions, still maintain its performance, Over the printing oven, will not blister
4.Durable:When there is cloth, wipe it When using the same positioning, do not replace
5.Clean:Imported parchment and natural rubber, no residue, No need to clean the platen, save labor, Improve work efficiency, reduce time costs
Specification
| Adhesion |
400-700 g/25mm |
| Base Weight |
70±3 g/m2 |
| Width |
14",16",18",20",24",36", to 52" |
| Length |
100 meters or 100 feet |
| Tensile strength |
Horizontal≥3.0 (kg/cm) |
| Vertical≥4.0 (kg/cm) |
| Tear strength |
Horizontal≥600 (m/N) |
| Vertical≥500 (m/N) |
How to use:
1.Make sure the platens are clean before applying the platen masking tape.
2.Apply the tape from the back with the sticky side down. Cut at the top of the platen.
3.Use the tape role or squeegee to slowly stick the tape to the platen ensuring there are no air bubbles. If you get an air bubble you can pull off and do again.
4.Use a sharp knife to poke a hole in any remaining air bubbles and press down to smooth out.
5.Mark on the tape before apply your adhesive spray.
6.Just remove the tape and it keeps your platen always clean.
Application:
Pallet tape designed for use in textile screen printing to protect the platens from spray adhesive build-up. Eliminates the need for costly solvents and rag disposal.
Apply to all kinds of printing machine (oval printing machine, octopus printing machine, etc.), as the cutting piece positioning. Can also be used for hand-printed platen, embroidery platen positioning.
Packing and Delivery
Common Specification:
Width in Inch:12",14",16",18",20",22",24",26",28",30",32"...Max 48" or 52"
Width in centimeter:35 cm,40cm,45 cm,50 cm,55cm,60cm,65 cm,70 cm....Max 120 cm or 1320 mm
Roll Length:50 meters per roll,100 meters per roll,100 yards per roll
For other special specifications can provide cutting.
Storage:
Do not transport or store with volatile organic solvents, avoid direct sunlight, rain. It should be stored at a temperature of 10ºC to 30ºC and a humidity of 40% to 70%. Buy for the best performance within 6 months after purchase. Storage, the platen mask should be placed, so as not to crush.
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 
Advantage:
