1012 โวลต์ /24V MPPT ชุดควบคุมพลังงานแสงอาทิตย์

Features:
1. Infrared remote control with LCD display
2. Waterproof IP67 for high humidity areas
3. Microcontroller and CPU software intelligent control
4. Digital LED indicating light to show the working mode and lighting time
5. Protection against overload, short circuit and reverse connection
6. Temperature compensation
7. Utilizes serial mode PWM control for maximum Efficiency
8. ISO9001 CE ROHS Certificate Approved

Specifications:

Phenomenon
Causes and solutions
When there is sun rays irradiating at solar panels LED indicator (1) don't work;
Check the if connection of solar panels and this controller is correct like if there is reverse connection of anode and cathode even if there is disconnect of terminals;
Solar panel indicator (1) flashes fast;
System is in the stage of over voltage; There is disconnection between battery and solar panels even final loads, check if the charge circle is in right connection.
Load indicator (3) working normally but there is no output;
Check if the connection of loads and controller is in the right method
Battery indicator turns red and there is no output-loads don't work;
Battery is in the stage of over charge, charge the battery again to reuse

Electrical parameters
Model
SDP-SP24A10T(E)
Rated charging current
10A; 20A
Rated load working current
10A; 20A
System working voltage
12V; 24V; 24V/12V AUTO;
Over load current point and short circuit current point
When 1.25 times of rated 10A current (12.5A) last 60 seconds or when 1.5 times of rated current last 5 seconds battery LED indicator flashes slowly.
When output current reach 3 times of 10A rated current(30A), battery LED indicator turn to red(There is no output any more)
No load system consumption
≤ 6 MA
Charging circuit voltage drop
≤ 0.26V
Discharging circuit voltage drop
≤ 0.15V
Over voltage protection point
17V, × 2/24V;
Working temperature
Industrial grade: -35° C to +55° C(Suffix I);
Boost charge voltage point
14.6V; × 2/24V; (Only happens when over discharge happens)
Direct charge voltage point
14.4V; × 2/24V;
Float charge voltage point
13.6V; × 2/24V;
Back returned voltage point after charging(Above this voltage point system will not work)
13.2v; × 2/24V;
Unit voltage temperature compensation
-5mv/° C/2V(Boost, Direct, Float, Back returned unit voltage temperature compensation);
Under voltage point
12.0V; × 2/24V;
Over discharge voltage point
11.1V; × 2/24V;
Back returned voltage point after charging for compensation of over discharge
12V-14.7V; 24V-26.7V;
Light control voltage point
4V-8.5V; 8V-17V;
Control principle
PWM
Notes: The rights of modification of the above parameters if reserved by us.