Convex Code Printer

One: main use

Manual convex code printer is a necessary equipment for the post-production and processing of PVC card. The function is in the PVC card
The convex code is pressed on the surface, so that the PVC card can be identified and unique.

Two: operation instructions

1. Put the PVC card that needs to be embossed into the card slot at the front of the card frame.

2. Rotate the Chrysanthemum Character Wheel to transfer the characters to the character pointer position.

3. Choose the upper and lower positions of PVC cards to be printed. You can gently push and pull the card frame to select.

4. Left and right position selection of the card: to move to the right can be completed by directly nudging the card frame, and to move to the left can be lowered
Press the handle (rotate it by about 15 degrees) and reset it.

5. The card is printed from left to right. After each character is pressed, it will automatically move one space to the left.

6. The character spacing can be rotated to the right of the card frame black knob, according to the white indicator bar on the knob into

Select row spacing 1/7 (large gap) or 1/10 (small gap).

7. Embossing characters: reset the operating handle after pressing it to the bottom.

Three: matters needing attention

1. Hands and other hard objects are strictly prohibited to be put into the machine during the embossing process.

2.PVC card use should be standard size (85.5*55mm), it is strictly prohibited to other specifications and materials
The card is imprinted inside the machine to avoid damage to the typeface inside the machine.

3. The impact and large vibration are strictly prohibited during use and handling.

4. Please pay attention to the position of pointer in the red square when imprinting. The machine should work within the travel range of the card board.
Excessive work schedule may cause damage to the machine.