ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว The heat pump dryer is a heat increasing device, mainly used in the drying and dehydration process of food, medicinal materials, wood, agricultural and sideline products, industrial products, etc. The high-temperature heat pump drying unit uses the inverse Carnot principle to absorb heat from the surrounding environment and transfer it to the heated object (object with a higher temperature). Its working principle is opposite to that of the refrigerator. Both are based on the inverse Carnot principle. It works on the principle of circulation, the difference is that the former increases the temperature and the latter decreases the temperature.
High-temperature heat pump drying unit is suitable for drying bedding in hotels, dehydrating seafood, vegetables, AD black fungus, melon seeds, peanuts, fruits and vegetables, meat products, casings, tobacco leaves, leather, mushrooms, wolfberries, dried fruits, mosquito coils, tribute Incense, cloth, clothing, grains, noodles, yuba, fertilizer, medicine, Chinese medicinal materials, paper products, wood, seeds, sludge, gypsum, hardware products, metallurgical products, mining by-products, chemical products, flue gas desulfurization gypsum, clay , drying of grass, flue-cured tobacco, pulverized coal, coal slime, lignite, etc. In terms of industrial hot water, it can also meet the needs of constant temperature of plating liquid in electroplating plants, heating and insulation of high-temperature hot water in slaughterhouses, supply of high-temperature hot water in star-rated hotels, and high-temperature hot water in industrial enterprises.
It completes the gas pressure and temperature rise process in the compressor (the temperature is as high as 100°C). It enters the indoor machine and releases high-temperature heat to heat the air in the drying room. At the same time, it is cooled and converted into a liquid state. When it runs to the outdoor machine Afterwards, the liquid quickly absorbs heat and evaporates and is converted into a gas again. At the same time, the temperature can drop to -20ºC~-30ºC. At this time, the air around the heat absorber will continuously transfer heat to the refrigerant. When the high-temperature heat pump drying unit is working, like ordinary air conditioners and heat pump units, it absorbs the energy in the low-temperature environmental medium in the evaporator QA: It consumes part of the energy itself, that is, the compressor power consumption QB: Through the working fluid circulation system, The condenser releases heat QC, QC=QA+QB, so the efficiency of the high-temperature heat pump drying unit is (QB+QC)/QB, and the heating efficiency of other heating equipment is less than 1, so the high-temperature heat pump drying unit heats The efficiency is much greater than that of other heating equipment. It can be seen that using a high-temperature heat pump drying unit as a drying device can save energy, while also reducing the emission of CO2 and other pollutants, achieving energy saving and emission reduction effects.
|
Model
|
JT-KFX3WII
/F30 AN
|
YHJ-KFX5WI
/F60 ABCN
|
YHJ-KFX5WI
/T60 ABCN
|
YHJ-KFX7WI
/F60 ABCN
|
YHJ-KFX7WI
/T60 ABCN
|
YHJ-KFX7WII
/F90 ABCN
|
|
Dimensions(mm)
|
2520*1150*2100
|
3380*1790*2200
|
3380*2100**2200
|
3380*1790**2200
|
3380*2100*2200
|
4040*2200**2200
|
|
Weight(kg)
|
359
|
662
|
690
|
685
|
715
|
820
|
|
Internal net dimensions (mm)
|
|
|
2050*1980*1990
|
|
2050*1980*1990
|
|
|
Rated heating capacity(kw)
|
9
|
15
|
15
|
21
|
21
|
21
|
|
Host power(kw)
|
2.4
|
4.2
|
4.2
|
5.6
|
5.6
|
5.6
|
|
Electric auxiliary power(kw)
|
2.4
|
9
|
9
|
18
|
18
|
9
|
|
Circulation fan power(kw)
|
1.1
|
2.2
|
2.2
|
2.2
|
2.2
|
3.3
|
|
Circulating air volume(m³/h)
|
7500-5000
|
15000-10000
|
15000-10000
|
15000-10000
|
15000-10000
|
26000-16000
|
|
Dehumidification fan power(kw)
|
0.12
|
0.18
|
.18
|
.18
|
.18
|
0.25
|
|
Dehumidification air volume(m³/h)
|
1200-800
|
2200-1400
|
2200-1400
|
2200-1400
|
2200-1400
|
3200-1800
|
|
rated power(kw)
|
3.7
|
6.6
|
6.6
|
8
|
8
|
8.9
|
|
Maximum power(kw)
|
6.1
|
15.6
|
15.6
|
25.6
|
25.6
|
17.9
|
|
Rated voltage(V)
|
220
|
380
|
380
|
380
|
380
|
380
|
|
Rated current(A)
|
17
|
11
|
11
|
13
|
13
|
15
|
|
Maximum current(A)
|
28
|
25
|
25
|
41
|
41
|
29
|
|
Operating temperature range(ºC)
|
-5-45
|
|||||
|
Drying temperature(ºC)
|
ambient temperature-75
|
|||||
|
Number of brackets in the room
|
|
|
4
|
|
4
|
|
|
Number of layers in the room
|
16
|
15
|
15
|
15
|
15
|
15
|
|
Layer spacing (mm)
|
100
|
110
|
112
|
110
|
112
|
110
|
1. It can realize low-temperature air closed cycle drying and the material drying quality is good. By controlling the working conditions of the device, the temperature of the hot dry air in the drying room is between 20 and 80°C, which can meet the high-quality drying requirements of most heat-sensitive materials; the closed cycle of the drying medium can avoid gas exchange with the outside world. Possible impurity contamination of materials, which is especially important for food, pharmaceuticals or biological products. In addition, when the material is sensitive to oxygen in the air (easy to oxidize or burn and explode), an inert medium can be used instead of air as the drying medium to achieve oxygen-free drying.
2. High efficiency and energy saving. The heat of the heated air in the heat pump dryer mainly comes from the sensible heat and latent heat contained in the warm and humid air discharged from the recycling drying room. The only energy that needs to be input is the power consumption of the heat pump compressor, and the heat pump consumes a small amount of power to produce the drying process. Take advantage of large amounts of heat.
3. Temperature and humidity control are convenient. When the material has high requirements on the temperature and humidity of the air entering the drying room (such as wood, etc.), the evaporation temperature and condensation temperature of the working fluid in the evaporator and condenser can be adjusted to meet the material's requirements on texture, appearance, etc. Require.
4. Environmentally friendly. In the heat pump drying device, the drying medium is circulated in a closed cycle, and there is no pollution caused by material dust, volatile substances and odors that are discharged to the environment along with the drying exhaust gas; the waste heat in the exhaust of the drying chamber is directly recovered by the heat pump to heat the cold dry air, without Thermal pollution caused by the unit to the environment.
5. Multifunctionality can be achieved. The heat pump in the heat pump drying device also has a refrigeration function. In seasons with fewer drying tasks, the refrigeration function can be used to achieve low-temperature processing (such as quick freezing, refrigeration) or preservation of a variety of materials. It can also expand the heating function of the heat pump in cold weather. Providing heat to cultivation (such as greenhouses) or breeding sites during the season.
6. The heat pump dryer is suitable for a wide range of materials. Materials suitable for drying are mainly materials whose drying process can withstand temperatures between 20 and 80°C, or materials that can withstand higher temperatures but are more energy-saving or safer to use heat pump drying. Materials that have been widely studied and applied include wood (such as oak), grains, seeds, edible fungi (such as mushrooms, fungus), medicinal materials (such as ginseng, etc.), seafood (such as fresh oysters, scallops, etc.), biologically active products ( Such as cells, enzymes), tea, paper, etc.
ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 
