25 amp arc fault breaker 1P+N 6KA arc fault circuit breaker

• ความจุเบรก: วงจรเบรกเกอร์แรงดันไฟฟ้าต่ำ
• การทำงาน: ประเภทของไฟฟ้า
• ความเร็ว: วงจรเบรกเกอร์ความเร็วสูง
• สื่ออาร์คดับไฟได้เมื่อติดไฟ: อากาศ
• การติดตั้ง: แก้ไขแล้ว
• โครงสร้าง: RCBO
• ไม่ใช่ ของรุ่น: TMA1-40 1P+N 6kA C25 typeA
• หมายเลขเสา: 1P+N
• พิมพ์: วงจรเบรกเกอร์
• ฟังก์ชัน: การป้องกันวงจรเบรกเกอร์ล้มเหลว, การป้องกันกระแสไฟเกิน, RCCB
• การรับรอง: ISO 2000, CE, CB, Ukca, NF
• มาตรฐาน: IEC/En 62606 & IEC 61009-1
• เส้นโค้งแบบสะดุดได้: B, c
• อัตรากระแสไฟ ( นิ้ว ): 6a, 10A, 16A, 20A, 25A, 32A, 40a
• Residual Current Type: Type AC, a
• Residual Current (LΔn): 30mA, 100ma, 300ma
• Making Breaking Capacity (IΔm): 2, 000A
• ระดับการจำกัดพลังงาน: 3
• คำหลัก 2.: afdd breaker
• คีย์เวิร์ด 3: afdd protection
• คำสำคัญ: arc fault circuit breaker
• แพคเพจการขนส่ง: Single Gift Box, Carton Package
• ข้อมูลจำเพาะ: 115 x 69.6 x 18 mm
• เครื่องหมายการค้า: Timelec
• ที่มา: China
• รหัสพิกัดศุลกากร: 8536200000
• กำลังการผลิต: 200, 000

คำอธิบายสินค้า

Product Description

AFCI, Arc-Fault Circuit Interrupter , or being called AFDD, Arc Fault Circuit Interrupter, in North Amerca, in comply wtih IEC/BS EN 62606.
In terms of circuit protection,Timelec has MCB for short-circuit and overload protection, RCD (RCCB) for residual current protection; yet not safe enough. According to statistics, in terms of electrical safety, 90% of fires are caused by electric arc, and we need AFDD for arc protection.

 

Timelec AFCI is AFDCI+RCBO, offering short-circuit, overload, residual current, arc and over-voltage protection, meeting the standard of IEC/BS EN 62606 and IEC/BS EN 61009-1, and it selectively distinguishes a harmless arc from a potentially dangerous arc. For example, it breaks the circuit when it detects electric arc which is a signature of loose connections in home-wiring, as loose connection can develop over time and sometimes become hot enough to cause house fires.
 

Product Parameters

Product category	CIRCUIT BREAKER
Product type	ARC FAULT DETECTION DEVICES (AFDDs)
Product model	TMA1-40
Unique selling proposition	With AFD+RCBO protection With Over-vol. protection Total length, 115mm
Technical data		Standard	IEC/EN 62606 & IEC 61009-1
	Electrical features	Rated curret (In)	6A,10A,16A,20A,25A,32A,40A
		Trip curve	B, C, D
		Model	Electronic
		RCD Type	AC, A
		Pole	1P+N
		Rate voltage (Ue)	240V
		Insulation voltage(Ui)	500V
		Rated frequency	50Hz
		Energy limiting class	3
		Rated residual operating current (IΔn)	30mA, 100mA, 300mA
		Rated breaking capacity (Icn)	6KA
		Rated operating short circuit breaking capacity (Ics)	6KA
		Rated residual making and breaking capacity(IΔm)	2000A
		Rated impulse withstand voltage (Uimp)	4KV
		Surge current resistance / at (8/20) μs	3KA
		Overvoltage protection	270V-300V
		Electrical life	4,000
		Pollution degree	2
	Mechanical features	Mechanical life	20,000
		Protection degree	IP20
		Ambient temperature (with daily averages35°C)	-25°C +40°C
		Storage temperature	-25°C +70°C
	Installation	Terminal connection type	Cable, busbar
		Connection capacity (input)	25mm2
		Connection capacity (output)	16mm2
		Tightening torque (input)	2.5Nm
		Tightening torque (output)	1.2Nm
		35mm DIN rail

 
 What are arcs?
Visible plasma discharges caused by electrical current passing through a normally nonconductive medium, such as air.
It is caused when the electrical current ionizes gases in the air.
The temperature can exceed 600 ºC, sufficient to start a fire.
(20% fire associated with electrical distribution or other electrical appliance faults.)

What causes arcs?
An arc is created when the electrical current jumps between two conductive material. Most 2 types of arcs are Serial
Arc and Parallel Arc.
Most common causes includes:
1. worn contacts in electrical equipment,
2. damage to insulation,
3. break in cable and loose connections, Etc.


What is AFDD?
AFDD is protective device installed in consumer units to provide protection from arc faults.
It uses microprocessor technology to analyze the waveform of the electricity being used to detect any unusual signatures
which would signify an arc on the circuit.
It will cut off the power to the affected circuit and could prevent a fire.

Do I need to install AFDD?
Yes, it is highly recommended where there is an increased risk of fire:




According to IEC 60364 - Electrical installations of buildings Part 4-42 :
Arc Fault Detection Devices are designed to limit fire risks caused by the presence of arc fault currents in the final circuits of a fixed installation.They are installed in electrical switchboards, to protect circuits supplying power sockets and lighting and are especially recommended in cases of renovation. 

Since 2014, IEC 60364 recommends surrounding the installation and application environments of AFDDs in residential and commercial buildings:

•In locations with sleeping accommodations (e.g., hotels, nursing homes, bed-rooms in homes)

•In locations with risks of fire due to high quantities of flammable materials (e.g., barns, wood-working shops, stores of combustible materials)

•In locations with combustible constructional materials (e.g., wooden buildings)

•In fire propagating structures (e.g. high-rise buildings)

•In locations where irreplaceable goods are housed (e.g., museums)

It is recommended that AFDDs be installed at the place of origin of the low voltage final circuit to be protected (i.e., switchboard of an electrical installation ).

More specifically, the installation of the AFDD is highly recommended to protect circuits with highest risk of fire, such as:

•Protruding cables (risk of knocks)

•Outside cables (greater risk of deterioration)

•Unprotected cables in secluded areas (like storage rooms)

Aging, deteriorating wiring or wiring for which the connection boxes are inaccessible.

Our Advantages

Timelec AFDD (AFCI) total length, 115mm.
Compact yet not a compromise.
It is your best choice for overall protection and prevention in domestic and commercial applications.

Timelec offers customization:

•Printing method: laser / pad printing;

•Package: white gift box for selected product types for value adding;

                  carton box for full range as bulk package.

•Product design: based on volume to open new mould.

 

Certifications

 

Packaging & Shipping

White gift box: 1 pcs / gift box;

Yellow carton box: 60 pcs / carton box.

As a package in the distribution channel,
Timelec offers a corrugated carton box:

High quality,
High edge crush resistence,
Neutral print in black.
 

 

Installation Instructions