Lightweight C Channel Purlins for Steel Shed/Buildings

• ช่วงความหนา: 1.7 มม
• เคลือบสังกะสี: 60 แกรม
• มาตรฐานเหล็กกล้า: Q195/195 235/345
• ความยาว: สูงสุด 5.8 ม . สำหรับ 20gp;11.8 ม . สำหรับ 40gp/ HQ
• ขนาดพิเศษอื่นๆ: ติดต่อเราเพื่อขอรายละเอียด
• แอปพลิเคชัน: อู่ซ่อมรถโรงเก็บฯลฯ
• ไม่ใช่ ของรุ่น: C80-350
• แพคเพจการขนส่ง: Packed in Bundles with Straps
• ข้อมูลจำเพาะ: C80-300
• เครื่องหมายการค้า: YUMI
• ที่มา: Xiamen, China
• รหัสพิกัดศุลกากร: 73089000
• กำลังการผลิต: 100, 000 M Per Month

คำอธิบายสินค้า

Lightweight C channel purlins

1.C-sections general introduction:
 

C channel purlins are manufactured from hi-tensile, zinc coated steel strips,the processing is cold rolled by machine.The steel standards of C channel are Q195/235/345,which is meaning the yield strength no less than 195/235/345MPa.The zinc coating is 60-275g/m²(coating mass).For other standard requirement and zinc coating,please indicate,when inquiry.We could also accept to make steel purlins in ASTM standards,EN standards or AS standards.Regarding zinc coating,our max coating is 450g/m².Please be noted,thank you.
 

2.C purlin butt joint:

C purlin accessories is including brackets,bolts,steel rods etc.If you need us to offer full set of accessories,please let us know in advance,and we will have our engineer to help offer professional advice for your project.
At the same time,if you need us to offer other joint way drawing in details,please contact us for more information in details.
 

3. Product specifications:
 

We have size chart for C channel as below.if any other size is not same as our C purlins' specs,please don't be hesitated to contact us for possibility.We have professional production team here to make special size possible for you.

 

D section size(mm)	B size(mm)	L size(mm)	T size(mm)
80	50	20	1.7,2.0,2.5,3.0
100	40/50	20	1.7,2.0,2.5,3.0
120	40/50/60	20	1.7,2.0,2.5,3.0
140	40/50/60	20	1.7,2.0,2.5,3.0
150	40/50/60	20	1.7,2.0,2.5,3.0
160	40/50/60	20	1.7,2.0,2.5,3.0
180	60/70	20	1.7,2.0,2.5,3.0
200	60/70	20	1.7,2.0,2.5,3.0
220	70/75/80	20	1.7,2.0,2.5,3.0
250	70/75/80	20	1.7,2.0,2.5,3.0
300	80/100	20	1.7,2.0,2.5,3.0

 

4.Purlin accessories & Typical assemblies:

 

5.Packaging and handling:
 

Our C channel purlins and girts are supplied in strapped bundles.Usually bundle size is dependent,as per section size, length and total order,but generally, unless specified otherwise, bundles will weigh approximately 500kg (maximum) for ease of handling and cranage.
Under normal conditions, we can supply purlins in lengths up
to your requirement.Lengths longer than this have special transport and on-site handling requirements. Care must be taken when handling long lengths. Lifting must be carried out using a suitable spreader beam with properly located lifting points and slings.
 

6.Some safety notes:

1)All rigging, scaffolding and safety equipment must comply with the local standards and statutory requirements;
 

2)Our steel prulins are not designed to be walked on unless fully

covered by correctly installed roofing materials or the correct grade of safety mesh;
 

3)This product must be handled using a properly supervised crane or suitable lifting device. When working on the ground, the belts must always be used when installing pur and g. In any case, no weight shall be placed on the bridge, or on the g-bars that are not completely fixed in place and are properly bridged. The bolts must be of the correct size and grade and all bolts must be fully tightened during installation. The washers must be bolted to the outer web holes (closest to the sheet) and provided with inner flange holes.

 

7.Contact details for inquiry:
 

Contact person:Alina,Becky
Tel:[phone]
Mob :[phone]
 

8.Service:

1. Inquiry service:we will have salesman to do one-to-one customer service,to offer you product specs and introduction for you to confirm the final specs.And the salesman will follow up all the process belong to your request;
2. Technical service:Professional engineer team will offer you the related technical advice and support;
3. Delivery service:We have long-term cooperation forwarders,they will help us to offer you full set shipping service.Of course you could also require to use appointed forwarders.
4. Any special requirement about the order,we will do our best to meet up.

Xiamen Yumi Imp.& Exp. Co., Ltd. with the strong support from our group,we have confidence in offering you best price and product quality.