เกลียวตัวหมุนอุโมงค์แช่แข็งแบบเร็วเครื่องจักรแช่แข็งอุโมงค์เร็ว ฟรีซเซอร์

• บริการหลังการขาย: ชิ้นส่วนอะไหล่
• ประกันสินค้า: 1 ปี
• พิมพ์: ระบายความร้อนด้วยอากาศ
• น้ำหล่อเย็น: น้ำอุตสาหกรรม
• ประเภทระบบ: เปิด System
• สายพันธุ์ของพัดลม: พัดลมความถี่
• ไม่ใช่ ของรุ่น: SDSF1000
• ระดับเสียง: ต่ำ
• ฟิลด์แอปพลิเคชัน: การแปรรูปอาหาร
• การรับรอง: RoHS, ของเรา, ISO, CE, CCC, ฉัน
• เงื่อนไข: ใหม่
• จุดขายหลัก: มีปริมาตรน้อยลง / ทนทาน
• การควบคุมไฟฟ้า: PLC อัตโนมัติ + แมนนวล
• ความจุของการระบายความร้อน: 1000 กก ./ ชม
• วัสดุ: สแตนเลสสตีล
• อุณหภูมิขาเข้าและขาออก: +15~-020 การรับน้ำหนักเพิ่มขึ้น 80
• อุณหภูมิเยือกแข็ง: -35 º C
• ระดับเสียงที่มีประสิทธิภาพ: 100 มม
• ความกว้างประสิทธิผลของสายพาน: 600 มม
• การใช้ความเย็น: 170 กม
• จำนวนชั้น: 16
• เปิด / ปิด: 25.4 กิโลวัตต์
• แรงดันไฟฟ้า: 380 V
• ให้บริการหลังการขาย: เครื่องจักรที่ใช้งานในต่างประเทศ
• แพคเพจการขนส่ง: Container
• ข้อมูลจำเพาะ: 7700*5600*4150mm
• เครื่องหมายการค้า: UFEC
• ที่มา: จีน

คำอธิบายสินค้า

Product introduction:
Slide-driving spiral freezer is innovated and designed by our company, it is a new freezing equipment with three national patents. Comparing to the traditional single spiral IQF, slide-driving spiral freezer don't have cage and tensioning device, completely solve the problem of Derailment, extended belt lifetime, lower installed power, while achieving single spiral IQF low inlet and low outlet, and it can be made into a variety of rotating track geometry as needed. The device is widely used in aquatic products, meat category, fruits and vegetables, prepared foods category, and pre-cooling, freezing, baking process.

Conveyor belt
Using multi-gear-driven approach, belt fastener through the slider bar to the rail and run above polymer with a small friction coefficient polymer materials, with its own lubrication, not easy to produce dirt. On the one hand, omitting the middle cage, eliminating the static friction transmission components cause severe wear and tumble belt; on the other hand, the special structure of the net belt engaging with slider, so that never happen.

 

Compared with traditional spiral freezer

Serial number	Item category	Traditional spiral IQF	Slide -driving spiral IQF
1	Driving device	Driven by the static friction between the rotor and the net belt, which is easy to slip, has large wear, short lifetime, difficult maintenance, and is easy to be turned over.	Sliding on the rail thorough gear multi-layer rotary, the slider block with the rail, not slipping, do not turn the belt, easy disassembly, easy maintenance
2	Floor space	The double spiral can design the low inlet and low outlet, but the floor area is large.	Because the evaporator and the air cooler are installed inside the ellipsoid, same
3	Arrangement type	Single spiral IQF can only low inlet and high outlet, still need to configure the conveyor belt	Single spiral IQF can achieve low inlet and inlet outlet ,the direction can be flexible to layout
4	Running track	Driving principle is limited , can only achieve circular spiral trajectory	Can achieve circular, elliptical and other geometric trajectory
5	Tension	Yes	No
6	Installed power	The net belt is driven by a rotary cage, and the traction motor has a large friction coefficient, and the traction motor is provided with a tension traction motor. Installed power is large	Self lubrication friction components, the friction coefficient is less than the former, without tension traction motor, the installed power of the machine is small, and the energy consumption is small.

Features:Never turn over
The mesh belt adopts a special structure to buckle and cooperate, so that the belt will never turn over.No rotating cage design
No rotating cage design, the internal space is easier to clean and inspect.Flexible layout of incoming and outgoing materials
Achieve single spiral low-end purchase and low-end shipment, and at the same time, it can realize a variety of inlet and outlet layouts.Electrical control
Use PLC automatic control + manual control to ensure the stable operation of the equipment.
Energy saving
Reasonable airflow arrangement and the use of professional axial fans realize energy saving.
save space
No need for tensioning device, single screw can realize low-end purchase and low-end shipment, saving space.

The mesh belt runs through the self-lubricating sliding block and the friction strip of the guide rail.The direct contact between the belt and the friction strip causes the mesh belt to wear, and the belt is never turned, which completely solves the problems of downtime and difficult maintenance caused by turning the belt.The driving device is driven by the gear side, and each layer of the net has an independent power source, and the net belt is uniform Forced, independent gears, stable operation and easy maintenance. 
Adopting no rotating cage design, sufficient space in the inner circle, personnel can easily enter for sanitary cleaning Management, truly achieve sanitation without dead ends.Independent research and development control programming design, man-machine interactive control interface, easy to operate and easy to learn. electric. The components are provided by well-known international manufacturers. Double-door stainless steel waterproof electric control box. Automatic operation and manual operation modes are independent but complementary to each other.

Why choose us?

1. We are a professional refrigeration equipment manufacturer integrating design, manufacturing, sales and service. We can provide you with more comprehensive and reliable equipment and services.

2.We have many overseas branches that can provide you with reliable after-sales service (including on-site service and remote guidance service).

3.Our equipment adopts the latest design. Compared with traditional products, it has a more compact volume, more efficient output and more complete supporting facilities, which greatly reduces the cost of equipment maintenance and extends the service life of the equipment.

4.Our products use better materials, for example, the evaporator coil of the quick-freezer, we use more reliable and pressure-bearing stainless steel tubes, even copper tubes; For another example, our evaporative condenser, of the same model, uses thicker pipes and guard plates, so it has a heavier weight.

5.We are a factory designed, manufactured and sold by ourselves. We can achieve lower prices.

How I believe you?
We welcome and invite you to visit our customers' factories, overseas branches and China's head office to inspect our equipment and services on the spot. If it is not convenient for you to go abroad, we can also provide live video and other means to explore the factory online.

Where are you?
Our head office is set up in Yantai, Shandong, China, and has branches, offices or partners around the world. You can contact us through field visits, phone calls, email, WhatsApp or WeChat, etc.

How about the delivery time?
Different equipment requires different construction periods. Generally, we will clearly mark our construction period and delivery time for you in the quotation.

What kind of payment does your company support?
A: T/T, 100% L/C at sight, if you have other payment,please contact me.