ข้อมูลพื้นฐาน
ไม่ใช่ ของรุ่น
HFE60P/12-2HST-L2
ทฤษฎี
รีเลย์แม่เหล็กไฟฟ้า
โหลด
รีเลย์กำลังไฟปานกลาง
Mechanical Endurance
1 X 107OPS
Electrical Endurance
1 X 104OPS
เครื่องหมายการค้า
File No.: E134517
คำอธิบายสินค้า
Features
• Low height 10.5mm
• Low coil power
• High switching capacity 1A: 8A250VAC 2A,1A+1B: 5A250VAC
• 1 Form A, 2 Form A, 1 Form A+1 Form B configuration
• 3kV dielectric strength (between coil and contacts)
• Environmental friendly product (RoHS compliant)
CONTACT DATA
Contact arrangement | 1A | 2A, 1A+1B |
Contact resistance | Nogoldplated: 30mQ (at 1A6VDC) Gold plated: 20^ (at 0.1A6VDC) |
Contact material | AgSno2 |
Contact rating | 8A250VAC(COS0=1.0) 5A250VAC(COS0=0.4) 0.3A240VDC( t =0ms) 0.15A240VDC( t =40ms) 5A30VDC( t =0ms) | 5A250VAC(COS0=1.0) 3A250VAC(COS0=0.4) 0.3A240VDC( t =0ms) 0.15A240VDC(T=40ms) 5A30VDC( t =0ms) |
Max. switching voltage | 380VAC / 240VDC |
Max. switching current | 8A | 5A |
Max. switching power | 2000VA/150W | 1250VA/150W |
Mechanical endurance | 1 x 107ops |
Electrical endurance | 1 x 104oPS(at40°C,1.5son 1.5soff) |
CHARACTERISTICS
Insulation resistance | 1000MQ (at500VDC) |
Dielectric strength | Between coil & contacts | 3000VAC 1min |
Between open contacts | 1000VAC 1min |
Between contact sets | 2000VAC 1 min |
Surge voltage (between coil and contacts) | 5kV (1.2/50Ms) |
Operate time (single side stable) | 10ms max. |
Release time (single side stable) | 5ms max. |
Set time (latching) | 10ms max. |
Reset time (latching) | 10ms max. |
Shock resistance | Functional | 196m/s2 |
D estructive | 980m/s2 |
Vibration resistance | Functional | 10Hzto 55Hz 2.0mm DA |
D estructive | 10Hzto 55Hz 3.5mm DA |
Humidity | 5% to 85% RH |
Ambient temperature | -400C to 85°C |
Termination | PCB |
Unitweight | Approx. 4.5g |
Construction | Plastic sealed |
Notes: The data shown above are initial values.
COIL
Coil power
Single side stable: Approx. 300mW 1 coil latching:Approx. 150mW 2 coils latching: Approx. 300mW
COIL DATA at 23°C
Single side stable (300mW)
Nominal Voltage VDC | Pick-up VDC max. | Drop-out Voltage VDC min. | Max. Allowable Voltage VDC | Coil Resistance |
3 | 2.4 | 0.3 | 3.9 | 30x(1±10%) |
5 | 4.0 | 0.5 | 6.5 | 83x(1±10%) |
6 | 4.8 | 0.6 | 7.8 | 120x(1±10%) |
9 | 7.2 | 0.9 | 11.7 | 270x(1±10%) |
12 | 9.6 | 1.2 | 15.6 | 480x(1±10%) |
18 | 14.4 | 1.8 | 23.4 | 1080x(1±10%) |
24 | 19.2 | 2.4 | 31.2 | 1920x(1±10%) |
1 coil latching (150mW)
Nominal Voltage VDC | Set Voltage VDC max. | Reset Voltage VDC max. | Max. Allowable Voltage VDC | Coil Resistance |
3 | 2.4 | 2.4 | 3.9 | 60x(1±10%) |
5 | 4.0 | 4.0 | 6.5 | 167x(1±10%) |
6 | 4.8 | 4.8 | 7.8 | 240 x (1 10%) |
9 | 7.2 | 7.2 | 11.7 | 540x(1±10%) |
12 | 9.6 | 9.6 | 15.6 | 960x(1±10%) |
18 | 14.4 | 14.4 | 23.4 | 2160x(1±10%) |
24 | 19.2 | 19.2 | 31.2 | 3840x(1±10%) |
2 coils latching (300mW)
Nominal Voltage VDC | Set Voltage VDC max. | Reset Voltage VDC max. | Max. Allowable Voltage VDC | Coil Resistance |
3 | 2.4 | 2.4 | 3.9 | 30x(1±10%) |
5 | 4.0 | 4.0 | 6.5 | 83x(1±10%) |
6 | 4.8 | 4.8 | 7.8 | 120x(1±10%) |
9 | 7.2 | 7.2 | 11.7 | 270x(1±10%) |
12 | 9.6 | 9.6 | 15.6 | 480x(1±10%) |
18 | 14.4 | 14.4 | 23.4 | 1080x(1±10%) |
24 | 19.2 | 19.2 | 31.2 | 1920x(1±10%) |
SAFETY APPROVAL RATINGS
UL/CUL | 1 Form A: 8A250VAC 5A30VDC B300 R150 1/6 HP 125VAC/250VAC | 2 Form A / 1 Form A+1 Form B: 5A250VAC 5A30VDC B300 R150 1/6HP 125VAC/250VAC(For 1HD) 1/10HP 125VAC/250VAC(For 2H) |
| 1 Form A: | 2 Form A / 1 Form A+1 Form B: |
TMV | 8A250VAC | 5A250VAC |
| 5A 250VAC (COS0=0.4) | 3A 250VAC (COS0=0.4) |
| 5A30VDC | 5A30VDC |
Notes: 1)AII values unspecified are at room temperature.
2) Only typical loads are listed above. Other load specifications can be available upon request.
ORDERING INFORMATION
HFE60P/ | 12 | -1HD | S | T | G | -L 2 | -R | (XXX) |
Type | | | | | | | | |
Coil voltage Contact form
3,5,6,9,12,18,24VDC
1H: 1 Form A 2H: 2 Form A 1HD: 1 Form A+1 Form B
Construction S: Plasticsealed Contact material T: AgSno2
Contact plating G: Gold plated Nil: No gold plated
Sort L1: 1 coil latching L2: 2 coils latching
Nil: Single side stable
Polarity Special code1)
R: Reverse polarity Nil: Standard polarity
XXX: Customer special requirement Nil: Standard
Notes:1) We recommend flux proofed types for a clean environment (free from contaminations like H2S, So2, No2, dust, etc.).
We suggest to choose plastic sealed types and validate it in real application for an unclean environment (with contaminations like H2S, SO2, NO2, dust, etc.).
2) Contact is recommended for suitable condition and specifications if water cleaning or surface process is involved in assembling relays on PCB.
3) The customer special requirement express as special code after evaluating by Hongfa.
ที่อยู่:
No. 777 Dushi Road. Minhang District. Shanghai. China, Shanghai, China
ประเภทของธุรกิจ:
บริษัทการค้า
ขอบเขตธุรกิจ:
ไฟฟ้าและอุปกรณ์อิเล็กทรอนิกส์
แนะนำบริษัท:
Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with good quality at the reasonable price.