การเตือนภัยวิดีโอ GSM Photo

Video Security Alarm Instructions
1 Summary:
It integrates the "security, fire, gas, emergency medical help, anti hijacking" alarm functions based on the fixed wireless phone, and can be in code with "security alarm detector, fire detector, gas detector, medical help button"  and other wireless remote controls and detectors.When the probe inducts the alarm signal, the device will send the short message and voice message to user respectively according to the phone number stetted by user preliminarily.
2 Alarm Parameter Set:
The primary security set items are as below:
Except "receiving alarm setting", all the other items have been preset with a reasonable default in the time of ex-factory, and the user no need to reset if no special requirements requested.The user need only to save their own SMS of receiving alarm phone number(the phone number should be able to receive the SMS) and voice message of receiving alarm phone number(the user's mobile phone number or fixed phone number) in security Settings menu.
3 Keyboard Definition:
The security keys of phone panel are defined as follows:
(1)  is for"medical aid alarm";
(2) is for"emergency alarm";(Namely:Duress)
(3) is for"arm";(need the user to input the correct password)
(4) is for"disarm";(need the user to input the correct password)
(5) is for"partial arm";(need the user to input the correct password)
(6) is for"security set"(input the correct PW.And access to the setting menu,the initial PW is 668026)
4 The operation introduction:
4.1 Arm:(the screen display"Arm",all burglar detectors are in the working status.3 ways of arming:)
(1) Press the" "key of mainframe and input the correct password;
(2) Press the" "key of remote controller;
(3) Send the SMS with "1" to mainframe via the mobile phone which has been set as the receiving alarm number device;
4.2 Disarm and remove alarm:(Disarm under the status of alerting,and then the alerting will be removed and back to the disarm;All detectors will be removed when you disarm under the status of arming;The screen will display"disarm" after disarm.3 ways of disarming:)
(1) Press the" "key of mainframe and input the correct password;
(2) Press the" "key of remote controller;
(3) Send the SMS with "2" to mainframe via the mobile phone which has been set as the receiving alarm number device;
4.3 Partial Arm:(the screen display"partial arm",the burglar detectors of partial arm area and all of other detectors which are excluded in burglar arm area are in the working status.2 ways of arm:)
(1) Press the" " key of mainframe and input the correct password;
(2) Press the" "key of remote controller;
4.4 Emergency Alarm:When the user suffered duress and similar emergency status, press the" "key of mainframe or remote controller,meanwhile, the mainframe will be silent (the alarm whistle will stop) and send the alarm note to the user's cell phone;(the initial status of the alarm key of mainframe is close, the user could start it in the security menu based on his own requests.)
4.5 Medical Aid Alarm:When the elderly or acute disease patients encountered the sickness or other emergencies,press the" "key of keyboard or press the independent emergency medical aid button,the mainframe will be silent (the alarm whistle will stop) and send the alarm note to the user's cell phone;(the initial status of the alarm key of mainframe is close, the user could start it in the security menu based on his own requests.)
4.6 Remote Monitor:Send the SMS with "3" to mainframe via the mobile phone which has been set as the receiving alarm number device,the mainframe will call user's cell phone automatically,the user can monitor the site status after getting through the call, and the monitor will be over until hang up;
4.7 Remote Talkback:Send the SMS with "4" to mainframe via the mobile phone which has been set as the receiving alarm number device,the mainframe will call user's cell phone automatically