ข้อมูลพื้นฐาน
ไม่ใช่ ของรุ่น
EC01-26-139A,EC01-26-151A,402102481R,402102977R,6
Aligning
Non-Aligning Bearing
รหัสพิกัดศุลกากร
8482300000
คำอธิบายสินค้า
PURPOSE
The main function of the hub bearing is to support the load and provide precise guidance for the rotation of the hub. It bears both axial load and radial load, and is a very important component. Traditional automobile wheel bearings are composed of two sets of tapered roller bearings or ball bearings. The installation, oiling, sealing and clearance adjustment of the bearings are all carried out on the automobile production line. This structure makes it difficult to assemble in automobile production plants, high cost, and poor reliability, and the bearings need to be cleaned, oiled and adjusted when the automobile is maintained at the repair point. The hub bearing unit is developed on the basis of standard angular contact ball bearings and tapered roller bearings. It combines two sets of bearings as a whole. It has good assembly performance, can omit clearance adjustment, light weight, compact structure, and load capacity. Large, sealed bearings can be pre-loaded with grease, omit external wheel hub seals, and are free from maintenance. They have been widely used in cars, and there is a trend to gradually expand their applications in trucks.
INSTALLATION AND USE
In the past, single-row tapered roller or ball bearings were used in pairs for the most common wheel hub bearings for cars. With the development of technology, car hub units have been widely used in cars. The use range and usage of wheel hub bearing units are increasing day by day, and now it has developed to the third generation: the first generation is composed of double row angular contact bearings. The second generation has a flange for fixing the bearing on the outer raceway, and the bearing can be simply sleeved on the axle and fixed with a nut. Makes the maintenance of the car easier. The third-generation wheel hub bearing unit uses the bearing unit to cooperate with the anti-lock brake system ABS. The hub unit is designed with an inner flange and an outer flange. The inner flange is bolted to the drive shaft, and the outer flange installs the entire bearing together. Worn or damaged hub bearings or hub units will cause inappropriate and costly failures of your vehicle on the road, and even cause damage to your safety.
Please pay attention to the following matters in the use and installation of wheel bearings:
1. In order to ensure maximum safety and reliability, it is recommended that you always check the wheel hub bearings regardless of the age of the vehicle-pay attention to whether the bearings have early warning signs of wear: including any frictional noise during rotation or the suspension combination wheel is turning Deceleration abnormally at times. For rear-wheel drive vehicles, it is recommended that the front wheel hub bearings should be lubricated when the vehicle has traveled to 38,000 kilometers. When replacing the brake system, check the bearing and replace the oil seal.
2. If you hear the noise from the hub bearing part, first of all, it is important to find the location of the noise. There are many moving parts that may produce noise, and it may also be that some rotating parts come into contact with non-rotating parts. If it is confirmed that the noise is in the bearing, the bearing may be damaged and needs to be replaced.
3. Because the working conditions of the front wheel hub causing the bearing failure on both sides are similar, even if only one bearing is broken, it is recommended to replace it in pairs.
4. Wheel hub bearings are more sensitive. In any case, you need to use the right method and the right tools. In the process of storage, transportation and installation, the components of the bearing cannot be damaged. Some bearings require greater pressure to press in, so special tools are required. Be sure to refer to the automobile manufacturing manual.
5. The bearing should be installed in a clean and tidy environment. The entry of fine particles into the bearing will also shorten the service life of the bearing. It is very important to maintain a clean environment when replacing bearings. It is not allowed to hit the bearing with a hammer, and be careful not to drop the bearing on the ground (or similar improper handling). The condition of the shaft and the bearing seat should also be checked before installation. Even slight abrasion can lead to poor fit and cause early bearing failure.
6. For the hub bearing unit, do not attempt to disassemble the hub bearing or adjust the seal ring of the hub unit, otherwise the seal ring will be damaged and water or dust will enter. Even the raceways of the sealing ring and the inner ring are damaged, causing permanent failure of the bearing.
7. There is a magnetic thrust ring in the sealing ring of the bearing equipped with ABS device. This thrust ring cannot be collided, impacted or collided with other magnetic fields. Take them out of the packaging box before installation and keep them away from magnetic fields, such as motors or power tools used. When installing these bearings, observe the ABS alarm pin on the instrument panel through a road condition test to change the operation of the bearings.
8. For wheel hub bearings equipped with ABS magnetic thrust ring, in order to determine which side the thrust ring is installed on, you can use a light thing * near the edge of the bearing, and the magnetic force generated by the bearing will attract it. When installing, point the side with the magnetic thrust ring toward the inside, facing the sensitive element of ABS. Note: Incorrect installation may result in failure of the brake system.
9. Many bearings are sealed, and this type of bearing does not need to be greased throughout its life. Other non-sealed bearings, such as double-row tapered roller bearings, must be lubricated with grease during installation. Due to the different sizes of the inner cavity of the bearing, it is difficult to determine how much grease to add. The most important thing is to ensure that there is grease in the bearing. If there is too much grease, the excess grease will leak out when the bearing rotates. General experience: When installing, the total amount of grease should account for 50% of the bearing clearance.
10. When the lock nut is installed, the torque varies greatly due to the different bearing type and bearing seat.
Our Advantages: 1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality. 2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry. 3. Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent. 4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer's requirements and needs. 5. Quick Delivery: The company provides just-in-time delivery with its advanced supply chain management. |
BEARING PART NO. | DIMENSIONS(mm) | | | | | | | WEIGHT |
| | | | | | | | |
| d | D | B | C | R | r | SEAL | Kg |
| | | | | | | | |
32BWD05 | 32 | 72 | 22.5 | 45 | | | | |
38BWD212 | 38 | 72 | 18 | 37 | | | | |
5908B | 50.38 | 82 | 30 | 34 | | | C | 0.58 |
5908BD | 50.38 | 81.88 | 28 | 33 | | | C | 0.55 |
A-3910739 | 35 | 64 | 37 | 37 | | | | |
BAHB636108 | 25 | 67 | 22 | 34.1 | | | | |
DAC12280012 | 12 | 28 | 12 | 12 | | | A,C | 0.03 |
DAC20420030/29 | 20 | 42 | 30 | 29 | | | C | 0.18 |
DAC205000206 | 20 | 50 | 20.6 | 20.6 | | | D | 0.17 |
DAC255200206 | 25 | 52 | 20.6 | 20.6 | | | A | 0.19 |
DAC25520032 | 25 | 52 | 32 | 32 | | | C | 0.229 |
DAC25520037 | 25 | 52 | 37 | 37 | 3.5 | 0.8 | C | 0.31 |
DAC25520040 | 25 | 52 | 40 | 40 | | | C | 0.35 |
DAC25520042 | 25 | 52 | 42 | 42 | | | C | 0.36 |
DAC25520043 | 25 | 52 | 43 | 43 | | | C | 0.36 |
DAC25520043/45 | 25 | 52 | 43 | 45 | | | C | 0.37 |
DAC25550043 | 25 | 55 | 43 | 43 | | | C | 0.44 |
DAC25550045 | 25 | 55 | 45 | 45 | | | C | 0.46 |
DAC255600206/29 | 25 | 56 | 20.6 | 29 | | | A | 0.28 |
DAC25560032 | 25 | 56 | 32 | 32 | | | A/E | 0.34 |
DAC256000206/29 | 25 | 60 | 20.6 | 29 | | | A | 0.33 |
DAC25620028/17 | 25 | 62 | 28 | 17 | | | D | 0.19 |
DAC25720043 | 25 | 72 | 43 | 43 | | | C | 0.88 |
DAC27520045/43 | 27 | 52 | 45 | 43 | | | C | 0.34 |
DAC27530043 | 27 | 53 | 43 | 43 | | | C | 0.35 |
DAC27600050 | 27 | 60 | 50 | 50 | | | C | 0.56 |
DAC28580042 | 28 | 58 | 42 | 42 | | | C | 0.47 |
DAC28610042 | 28 | 61 | 42 | 42 | | | C/D | 0.56 |
DAC29530037 | 29 | 53 | 37 | 37 | | | C/E | 0.35 |
DAC30540024 | 30 | 54 | 24 | 24 | | | A | 0.201 |
DAC30580042 | 30 | 58 | 42 | 42 | | | C | 0.4 |
DAC30600037 | 30 | 60 | 37 | 37 | | | C | 0.42 |
DAC30600337 | 30 | 60.03 | 37 | 37 | 3.5 | 1.1 | C | 0.42 |
DAC30630042 | 30 | 63 | 42 | 42 | | | A | 0.56 |
DAC3063030042 | 30 | 63.03 | 42 | 42 | | | A | 0.56 |
DAC30640042 | 30 | 64 | 42 | 42 | 2.5 | 1 | C | 0.49 |
DAC306500264 | 30 | 65 | 26.4 | 26.4 | | | A | 0.36 |
DAC30670024 | 30 | 67 | 24 | 24 | | | C | 0.34 |
DAC30680045 | 30 | 68 | 45 | 45 | | | E | 0.73 |
DAC32700038 | 32 | 70 | 38 | 38 | | | E | 0.62 |
DAC32720045 | 32 | 72 | 45 | 45 | | | D | 0.6 |
DAC32720345 | 32 | 72.03 | 45 | 45 | | | D | 0.6 |
DAC34620037 | 34 | 62 | 37 | 37 | 3.5 | 1 | C | 0.41 |
DAC34640034 | 34 | 64 | 34 | 34 | | | D | 0.43 |
DAC34640037 | 34 | 64 | 37 | 37 | 3.5 | 1.1 | B | 0.47 |
DAC34660037 | 34 | 66 | 37 | 37 | | | C | 0.5 |
DAC34670037 | 34 | 67 | 37 | 37 | | | C | 0.504 |
DAC356180040 | 35 | 61.8 | 40 | 40 | | | E | 0.43 |
DAC35620037 | 35 | 62 | 37 | 37 | | | | |
DAC35620040 | 35 | 62 | 40 | 40 | | | E | 0.45 |
DAC356400341 | 35 | 64 | 17 | 41 | | | | |
DAC35640037 | 35 | 64 | 37 | 37 | | | B | 0.46 |
DAC35650035 | 35 | 65 | 35 | 35 | | | C | 0.4 |
DAC35650037 | 35 | 65 | 37 | 37 | | | C/D | 0.51 |
DAC35660032 | 35 | 66 | 32 | 32 | | | C | 0.42 |
DAC35660033 | 35 | 66 | 33 | 33 | | | C | 0.43 |
DAC35660037 | 35 | 66 | 37 | 37 | | | C | 0.48 |
DAC35680037 | 35 | 68 | 37 | 37 | | | C | 0.52 |
DAC35680039/36 | 35 | 68 | 39 | 36 | | | D | 0.53 |
DAC35680045 | 35 | 68 | 45 | 45 | | | E | |
DAC35680233/30 | 35 | 68.02 | 33 | 30 | | | D | 0.47 |
DAC35720028 | 35 | 72 | 28 | 28 | | | D | 0.49 |
DAC35720033 | 35 | 72 | 33 | 33 | | | C | 0.58 |
DAC35720033/31 | 35 | 72.02 | 16.5 | 31 | | | | |
DAC35720034 | 35 | 72 | 34 | 34 | | | A,D | 0.58 |
DAC35720045 | 35 | 72 | 45 | 45 | | | C | 0.63 |
DAC35720228 | 35 | 72.02 | 28 | 28 | | | D | 0.49 |
DAC35720233/31 | 35 | 72.02 | 33 | 31 | | | D | 0.54 |
DAC35720433 | 35 | 72.04 | 33 | 33 | | | C | 0.58 |
DAC35720434 | 35 | 72.04 | 34 | 34 | | | A,D | 0.58 |
DAC35740030 | 35 | 74 | 30 | 30 | | | C | 0.49 |
DAC35760054 | 35 | 76 | 54 | 54 | | | E | 0.95 |
DAC35770042 | 34.99 | 77.04 | 42 | 42 | | | D | 0.86 |
DAC36680033 | 36 | 68 | 33 | 33 | | | D | 0.47 |
DAC36720033/28 | 36 | 72 | 33 | 28 | | | D | |
DAC36720034 | 36 | 72 | 34 | 34 | | | D | 0.57 |
DAC36720042 | 36 | 72 | 42 | 42 | | | | 0.72 |
DAC36720534 | 36 | 72.05 | 34 | 34 | | | D | 0.58 |
DAC37720033 | 37 | 72 | 33 | 33 | | | E | 0.51 |
DAC37720037 | 37 | 72 | 37 | 37 | | | C | 0.59 |
DAC37720237 | 37 | 72.02 | 37 | 37 | | | C | 0.59 |
DAC37720437 | 37 | 72.04 | 37 | 37 | | | C | 0.59 |
DAC37740045 | 37 | 74 | 45 | 45 | | | C | 0.79 |
DAC36760029/27 | 36 | 76 | 29.2 | 27 | | | D | 0.55 |
DAC381700037 | 38.1 | 70 | 37 | 37 | | | E | 0.56 |
DAC38650050 | 38 | 65 | 50 | 50 | | | | |
DAC38680037 | 38 | 68 | 37 | 37 | | | | |
DAC38700037 | 38 | 70 | 37 | 37 | | | E | 0.56 |
DAC38700038 | 38 | 70 | 38 | 38 | | | B | 0.57 |
DAC38710233/30 | 37.99 | 71.02 | 33 | 30 | | | D | 0.5 |
DAC38710039 | 37.99 | 71 | 39 | 39 | | | C | 0.62 |
DAC3871W | 37.99 | 71.02 | 15 | 30 | | | | |
DAC38720034 | 38 | 72 | 34 | 34 | | | D | 0.54 |
DAC38720036/33 | 38 | 72 | 36 | 33 | | | | |
DAC38720040 | 38 | 72 | 40 | 40 | | | B | 0.63 |
DAC38720236/33 | 38 | 72.02 | 36 | 33 | | | D | 0.56 |
DAC38720440 | 38 | 72 | 20 | 20 | | | | |
DAC38730040 | 38 | 73 | 40 | 40 | | | B | 0.67 |
DAC38740036/33 | 38 | 74 | 36 | 33 | | | D | 0.61 |
DAC38740050 | 38 | 74 | 50 | 50 | | | A/S | 0.85 |
DAC38740236/33 | 38 | 74.02 | 36 | 33 | | | D | 0.59 |
DAC38740450 | 38 | 74.04 | 50 | 50 | | | A/S | 0.85 |
DAC38800036/33 | 37.97 | 80.02 | 36 | 33 | | | D | 0.79 |
DAC39(41)750037 | 39/41 | 75 | 37 | 37 | | | C | 0.62 |
DAC39680037 | 39 | 68 | 37 | 37 | | | B | 0.48 |
DAC39680637 | 39 | 68.06 | 37 | 37 | | | B | 0.48 |
DAC39680737 | 39 | 68.07 | 37 | 37 | | | B | 0.48 |
DAC39680837 | 39 | 68.08 | 37 | 37 | | | B | 0.48 |
DAC39720037 | 39 | 72 | 37 | 37 | | | B | 0.6 |
DAC39720637 | 39 | 72.06 | 37 | 37 | | | B | 0.6 |
DAC39740036/34 | 39 | 74 | 36 | 34 | | | | |
DAC39740039 | 39 | 74 | 39 | 39 | | | C | 0.66 |
DAC39740039-4RS | 39 | 74 | 39 | 39 | | | B | 0.66 |
DAC401080032/17 | 39.99 | 108 | 32 | 17 | | | F | 1.04 |
DAC40720036/33 | 40 | 72 | 36 | 33 | | | D | 0.5 |
DAC40720037 | 40 | 72 | 37 | 37 | | | C | 0.55 |
DAC40720637 | 40 | 72.06 | 37 | 37 | | | | |
DAC40730055 | 40 | 73 | 55 | 55 | | | C | |
DAC40740036 | 40 | 74 | 36 | 36 | | | E | 0.62 |
DAC40740036/34 | 40 | 74 | 36 | 34 | | | D | 0.58 |
DAC40740040 | 40 | 74 | 40 | 40 | | | B/C | 0.67 |
DAC40740042 | 40 | 74 | 42 | 42 | | | E | 0.7 |
DAC40750037 | 40 | 75 | 37 | 37 | | | C | 0.62 |
DAC40760033 | 40 | 76 | 33 | 33 | | | E | 0.6 |
DAC40760033/28 | 40 | 76 | 33 | 28 | | | A | 0.54 |
DAC40760041/38 | 40 | 76 | 41 | 38 | | | A/E | 0.7 |
DAC408000302 | 40 | 80 | 30.2 | 30.2 | | | D | 0.64 |
DAC40800031 | 40 | 80 | 31 | 31 | | | D/S | 0.65 |
DAC40800036 | 40 | 80 | 36 | 36 | | | B | |
DAC40800036/34 | 40 | 80 | 36 | 34 | | | D | 0.74 |
DAC40800036/34B | 40 | 80 | 36 | 34 | | | E | 0.75 |
DAC408000381 | 40 | 80 | 38.1 | 38.1 | | | C | 0.8 |
DAC40800045/44 | 40 | 80 | 45 | 44 | | | D | 0.89 |
DAC40820040 | 40 | 82 | 40 | 40 | | | | 0.75 |
DAC40840040 | 40 | 84 | 40 | 40 | | | | |
DAC408402538 | 40 | 84.03 | 38 | 38 | | | C | 0.97 |
DAC40840639/40 | 40 | 84.06 | 38.8 | 39.7 | | | E | 1.01 |
DAC41680040/35 | 41 | 68 | 40 | 35 | | | D | 1.06 |
DAC42720038 | 42 | 72 | 38 | 38 | | | C | 0.54 |
DAC42720038/35 | 42 | 72 | 19/38[1] | 35 | | | C | 0.52 |
DAC42750037 | 42 | 75 | 37 | 37 | | | C | 0.59/0.6[2] |
DAC42750037A | 42 | 75 | 37 | 37 | | | C | 0.58 |
DAC42750037B | 42 | 75 | 37 | 37 | | | E | 0.56 |
DAC42760033 | 42 | 76 | 33 | 33 | | | E | 0.59 |
DAC42760038 | 42 | 76 | 38 | 38 | | | D | 0.61 |
DAC42760038/33 | 42 | 76 | 38 | 33 | | | E | |
DAC42760038/35 | 42 | 76 | 38 | 35 | | | D | 0.65 |
DAC42760039 | 42 | 76 | 39 | 39 | | | A | 0.62 |
DAC42760040/37 | 42 | 76 | 40 | 37 | | | A | 0.66 |
DAC42760040/37B | 42 | 76 | 40 | 37 | | | A | 0.53 |
DAC42760040/37BS1 | 41.99 | 76 | 40 | 37 | | | A | 0.532 |
DAC42780038 | 42 | 78 | 38 | 38 | | | A | 0.69 |
DAC42780041/38 | 42 | 78 | 41 | 38 | | | A | 0.75 |
DAC42780045 | 42 | 78 | 45 | 45 | | | E | 0.76 |
DAC42780541/38 | 42 | 78.05 | 41 | 38 | | | C | 0.69 |
DAC428000302 | 42 | 80 | 30.2 | 30.2 | | | | |
DAC42800036/34 | 42 | 80 | 36 | 34 | | | E | 0.81 |
DAC42800037 | 42 | 80 | 37 | 37 | | | E | 0.68 |
DAC42800042 | 42 | 82 | 42 | 42 | | | | 0.82 |
DAC42800045 | 42 | 80 | 45 | 45 | | | B | 0.86 |
DAC42800342 | 42 | 80.03 | 42 | 42 | | | C | 0.82 |
DAC42800342A | 42 | 80.03 | 42 | 42 | | | B | 0.81 |
DAC42800342B | 42 | 80.03 | 42 | 42 | | | C | 0.81 |
DAC42800342C | 42 | 80.03 | 42 | 42 | | | E | 0.822 |
DAC42820036 | 42 | 82 | 18 | 36 | | | C | 0.77 |
DAC42820036 | 42 | 82 | 36 | 36 | | | C/E | 0.77 |
DAC42820036B | 42 | 82 | 36 | 36 | | | E | 0.78 |
DAC42820037 | 42 | 82 | 37 | 37 | | | C | 0.79 |
DAC42840036 | 42 | 84 | 36 | 36 | | | | 0.84 |
DAC42840039 | 42 | 84 | 39 | 39 | | | F/S | 0.39 |
DAC4284030039 | 42 | 84.03 | 39 | 39 | | | F | 0.39 |
DAC43760043 | 42 | 76 | 43 | 43 | | | E | 0.73 |
DAC43(45)820037 | 43/45 | 82 | 37 | 37 | | | C | 0.76 |
DAC43790041 | 43 | 79 | 41 | 41 | | | | |
DAC43790041/38 | 43 | 79 | 41 | 38 | | | E | 0.77 |
DAC43790045 | 43 | 79 | 45 | 45 | | | | 0.84 |
DAC43800038 | 43 | 80 | 38 | 38 | | | E | 0.75 |
DAC43800050/45 | 43 | 80 | 50 | 45 | | | D | 0.91 |
DAC43820045 | 43 | 82 | 45 | 45 | | | E | 0.96 |
DAC43(45)850037 | 43/45 | 85 | 37 | 37 | | | E | 0.91 |
DAC44825037 | 44 | 82.5 | 37 | 37 | | | E | 0.73 |
DAC44840042/40 | 44 | 84 | 42 | 40 | | | | 0.9 |
DAC45800045 | 45 | 80 | 45 | 45 | | | C | 0.78 |
DAC45800045B | 45 | 80 | 45 | 45 | | | B | 0.78 |
DAC4580045 | 45 | 80 | 22.5 | 45 | | | | |
DAC45830045 | 45 | 83 | 45 | 45 | | | | 0.6 |
DAC45840039 | 45 | 84 | 39 | 39 | | | C | 0.85 |
DAC45840041/39 | 45 | 84 | 41 | 39 | | | E | 0.8 |
DAC45840042/40 | 45 | 84 | 42 | 40 | | | E | 0.94 |
DAC45840045 | 45 | 84 | 45 | 45 | | | E | 0.97 |
DAC45850023 | 45 | 85 | 23 | 23 | | | D | 0.54 |
DAC45850039 | 45 | 84 | 19.5 | 39 | | | | |
DAC45850041 | 45 | 85 | 41 | 41 | | | A/B/C | 0.89 |
DAC45850048/43 | 45 | 85 | 48 | 43 | | | | 1 |
DAC458500302 | 45 | 85 | 30.2 | 30.2 | | | A | 0.63 |
DAC45880039 | 45 | 88 | 39 | 39 | | | B | |
DAC47810053 | 47 | 81 | 53 | 53 | | | E | 0.95 |
DAC47850045 | 47 | 85 | 45 | 45 | | | | |
DAC48890044/42 | 48 | 89 | 44 | 42 | | | E | 1.07 |
DAC49840043 | 49 | 84 | 43 | 43 | | | C.E | 0.84 |
DAC49840048 | 49 | 84 | 48 | 48 | | | C.E | 0.89 |
DAC49840050 | 49 | 84 | 50 | 50 | | | | |
DAC49880046 | 49 | 88 | 46 | 46 | | | C | 1.05 |
DAC50370819033/28 | 50.37 | 81.9 | 33 | 28 | | | A | 0.53 |
DAC50370819033/28A | 50.37 | 81.9 | 33 | 28 | | | C | 0.535 |
DAC50900034 | 50 | 90 | 34 | 34 | | | A | 0.82 |
DAC559052/40 | 55 | 90 | 52 | 40 | | | E | |
DAC55900060 | 55 | 90 | 60 | 60 | | | E | 1.5 |
DAC559054/39 | 55 | 90 | 54 | 39 | | | E | |
DAC56880040/35 | 56 | 88 | 40 | 35 | | | E | |
DAC70100028 | 70 | 100 | 28 | 28 | | | A | 0.584 |
DAC70100032 | 70 | 100 | 32 | 32 | | | A | 0.692 |
DAC70100032A | 70 | 100 | 32 | 32 | | | A | 0.692 |
DAC70100032B | 70 | 100 | 32 | 32 | | | A | 0.692 |
DAC76237920822/19 | 76.24 | 92.08 | 22.2 | 19 | | | A | 0.212 |
DAC76415920822/19 | 76.42 | 92.08 | 22.2 | 19 | | | A | 0.212 |
DE0690 | 30 | 68 | 22.5 | 45 | | | | |
DU5496-5 | 54 | 96 | 51 | 51 | | | E | |
L358033-BR2 | 35 | 80 | 44089 | 33 | | | | |
PAC36680033 | 36 | 68 | 16.5 | 33 | | | | |
QJ208 | 40 | 80 | 9 | 18 | | | | |
QJ307 | 35 | 80 | 10.5 | 21 | | | | |
BEARING PART NO. | DIMENSIONS( | | | | | Weight |
| | | | | | |
| d | D | T | B | C | Kg |
| | | | | | |
30215/P6/DF | 75 | 130 | | 25 | 22 | 2.83 |
30216/P6/DF | 80 | 140 | | 26 | 22 | 3.51 |
350210X2 | 50 | 90 | | 20 | 38.9 | 1.235 |
690502 | 45 | 88 | | 27.5 | 55 | |
32009 ASSY 90215 | 45 | 75 | 44.56 | 20 | 15.5 | |
331335/820 | 35 | | 35 | 16.4 | 39.5 | 0.93 |
350210X2 | 50 | | 49 | 20 | 39 | 1.15 |
41KW001 | 41 | 68 | 40 | 20 | 35 | |
42KWD02A | 42 | 72 | | 19 | 35 | 0.59 |
44158/363D | 39.688 | 92.075 | 55.93 | 23.698 | 39.688 | |
445539 CC | 25 | 52 | | 18.5 | 37 | 0.358 |
46T080603 | 38 | 64 | | 16 | 29 | 0.414 |
46T80604 | 48 | 64.02 | 36 | 18 | 33 | |
46T080805 | 40 | 80 | | 22.5 | 44 | 0.935 |
513055 | 30 | 58 | | 21 | 42 | 0.49 |
533370 | 25 | 64 | | 19.1 | 27.6 | 0.653 |
801023AB | 29 | 53 | 37 | 18.5 | 37 | 0.354 |
801437 | 27 | 52 | | 22.5 | 43 | 0.418 |
A-48674 | 42 | 76 | | 19.5 | 37 | 0.73 |
BTH1011AB | 55 | 90 | | 30 | 60 | |
BTH1024 | 40 | 73 | | 27.5 | 55 | |
BTH-1024C | 40 | 73 | | 27.5 | 55 | 0.986 |
C564 | 25 | 52 | | 21.5 | 43 | 0.424 |
C572 | 25 | 55 | | 21.5 | 43 | 0.497 |
CRI-0569 | 27 | 52 | | 22.5 | 43 | 0.423 |
CRI-08A05 | 38 | 65 | | 26 | 48 | 0.631 |
DU4080 | 40 | 80 | | 22.5 | 44 | 0.946 |
DU5496-5 | 54 | 96 | | 25.5 | 51 | 1.474 |
DV427238 | 42 | 72 | | 19 | 38 | |
DV427238/35 | 42 | 72 | 38 | 19 | 35 | |
E-21003203 | 30 | 60.03 | | 18.5 | 37 | 0.41 |
E-21003212 | 35 | 65 | | 17.5 | 35 | 0.5 |
E-21003213 | 49 | 84 | | 24 | 48 | 1.05 |
E-21003325 | 55 | 90 | | 30 | 60 | 1.2 |
E97106E | 30 | 55 | | 13.5 | 25 | 0.294 |
FC2552X2 | 25 | 52 | | 18.5 | 40.2 | 0.359 |
FC3565 | 35 | 65 | | 17.5 | 35 | 0.447 |
FC40096 | 45.3 | 80 | | 24 | 48 | |
FC40887 | 25 | 55 | | 26.75 | 53.5 | 0.589 |
JRM2525/2552XD | 25 | 52 | | 18.5 | 37 | 0.37 |
JRM255543 | 25 | 55 | | 21.5 | 43 | |
JRM2828/2858XD | 28 | 58 | | 21 | 42 | 0.5 |
JRM3057 | 30 | 57 | 41 | 20.5 | 32 | |
JRM377237 | 37 | 72 | | 18.5 | 37 | |
JRM3838/3870XD | 38 | 70 | | 19 | 38 | 0.63 |
JRM3938A/3968XD | 39 | 68 | | 18.5 | 37 | 0.559 |
JRM3938X2/3870XD | 38 | 70 | | 19.5 | 37 | 0.608 |
JRM3939/3968XD | 39 | 68 | | 19.5 | 37 | 0.54 |
JRM3939/3972XD | 39 | 72 | | 18.5 | 37 | 0.665 |
JRM3939X2/3972XD | 39 | 72 | | 18.5 | 37 | 0.658 |
JRM3940/4068XD | 40 | 68 | | 21 | 42 | 0.631 |
JRM3940/4072XD | 40 | 72 | | 18.5 | 37 | 0.64 |
JRM3942/4282XD | 42 | 82 | | 18 | 36 | 0.832 |
JRM4040/4072XD | 40 | 72 | | 18.5 | 37 | 0.63 |
JRM406842 | 40 | 68 | | 21 | 42 | |
JRM4068XD | 40 | 68 | | 21 | 42 | |
JRM4242/4282XD | 42 | 82 | | 18 | 36 | 0.84 |
JXC25469CA | 49 | 84 | | 21.5 | 43 | |
JXC25469CA-98UA4 | 49 | 84 | | 24 | 48 | 1.088 |
JXC25469C/DA | 49 | 84 | | 21.5 | 43 | 0.976 |
LM104949E/11/DB | 50.8 | 82.55 | | 25.9 | 16.51 | 0.91 |
LM11749/10/DB | 17.5 | 39.88 | | 14.605 | 10.67 | 0.177 |
M03S356 | 30 | 60.04 | 37.4 | 16.5 | 14.3 | |
MA38895/302667 | 53.975 | 127 | 69.85 | 34.92 | 68.26 | |
S10D32211C | 55 | 100 | | 28 | 42.5 | 1.802 |
S33SR | 32 | 58 | | 32.55 | 57 | 0.641 |
TPE007 | 25 | 52 | | 18.5 | 37 | 0.352 |
TZ407237 | 40 | 72 | | 18.5 | 37 | 0.636 |
UCF346437 | 34 | 64 | | 18.5 | 37 | 0.535 |
UCF366437 | 36 | 64 | | 18.5 | 37 | 0.497 |
UCF427639 | 42 | 76 | | 19.5 | 39 | 0.75 |
UCF508454 | 50 | 84 | | 27 | 54 | 1.212 |
FAQ of Bearing
1. Q: Are you a factory or trading company?
A: UVK is specialized in manufacturing and exporting bearings.
UVK has own factory and warehouse.
2. Q: Can I get some samples and do you offer the sample free?
A: Yes, sure, UVK is honored to offer you samples. Can you buy a ticket?
3. Q: What is the payment?
A: 30% T/T In Advance, 70% T/T Against Copy Of B/L
B: 100% L/C At Sight
4. Q: What is the MOQ for bearing?
A: UVK Bearing MOQ is 1 PC.
5. Q: What kind of service you can offer?
A: Technology support; Installation guidance; OEM.
ที่อยู่:
No. 299, Dougou Village, Dougou Street, Shizhong District, Jinan City, Shandong Province
ประเภทของธุรกิจ:
ผู้ผลิต/โรงงานผลิต, บริษัทการค้า
ขอบเขตธุรกิจ:
อะไหล่และอุปกรณ์เสริมรถยนต์และมอเตอร์ไซค์, อุปกรณ์และส่วนประกอบอุตสาหกรรม, เครื่องจักรการผลิตและแปรรูป, เครื่องแต่งกายและอุปกรณ์เสริม
การรับรองของระบบการจัดการ:
ISO 9001, ISO 9000, ISO 14001, ISO 14000, ISO 20000, OHSAS/ OHSMS 18001, IATF16949, HSE, ISO 14064, QC 080000, GMP, BSCI
แนะนำบริษัท:
ก่อตั้งขึ้นในปี 1998 บริษัท Shandong Weuo Bearing Co., Ltd. มีพื้นที่ครอบคลุม 88 ตารางเมตร 850 ปัจจุบันบริษัทมีสินทรัพย์ถาวรมากกว่า 100 ล้านคนและพนักงานที่ให้บริการ 500 คน เนื่องจากเป็นรุ่นที่มีการวิจัยและพัฒนาการผลิตรวมทั้งยอดขายทำให้บริษัทมีปริมาณการผลิตลูกปืนสูงถึง 3 ล้านชุดต่อปีและมีมูลค่าการผลิตสูงกว่า 28 ล้านหยวนต่อปี
บริษัทมีกำลังคนที่แข็งแกร่งอุปกรณ์ที่ยอดเยี่ยมและเครื่องมือทดสอบที่สมบูรณ์ ปัจจุบันบริษัทมีอุปกรณ์การผลิตระดับมืออาชีพมากกว่า 400 ชุดสายการผลิต 5 สายการผลิตแบบหมุนควบคุมด้วยตัวเลขสายการผลิต 9 สายการผลิตเพื่อรักษาอุณหภูมิและสายการผลิตเครื่องบดอย่างแม่นยำ 12 สายการผลิต นอกจากนี้ยังมีมืออาชีพในการปรับเทียบและวัดกึ่งกลางและมีเครื่องมือตรวจจับมากกว่า 300 ชุด ผลิตภัณฑ์ทั้งหมดอยู่ภายใต้การตรวจสอบของศูนย์ตรวจสอบและตรวจสอบคุณภาพแห่งชาติสำหรับตลับลูกปืน
บริษัทสามารถผลิตลูกกลิ้งเรียวบางขนาดเล็กและตลับลูกปืนทรงกลมลึกขนาด P0, P6 และ P5 ที่มีเส้นผ่านศูนย์กลางภายนอกขนาด 40 มม . 300 ม . และ 500 มม . โดยส่วนใหญ่แล้วสินค้าเหล่านี้จะใช้กับอุตสาหกรรมยานยนต์เครื่องจักรวิศวกรรมเครื่องจักรกลและเครื่องจักรการเกษตร นอกจากนี้ผลิตภัณฑ์ดังกล่าวยังถูกส่งออกไปยังสหรัฐอเมริกาและประเทศพัฒนาอื่นๆในยุโรป
ประเภทผลิตภัณฑ์ได้แก่แบริ่งโรลเลอร์ทรงกระบอก ( แถวเดียวและสองแถว , สี่แถว ), ตลับลูกปืนแบบร่องลึก , แบริ่งโรลเลอร์ทรงเรียว , โรลเลอร์ทรงกลมและตลับลูกปืนแบบปรับแนวด้วยตนเอง , ตลับลูกปืนแบบสัมผัสเชิงมุม ( แถวเดียวและสองแถว ), โรลเลอร์ทรัสต์และแบริ่งบอลแบบทรัสต์และแบริ่งแบบไม่มาตรฐาน หมวดผลิตภัณฑ์ตามการใช้งานด้านอากาศยานแบริ่งการบิน , รถลาก , ผู้โดยสารและรถไฟที่สึกหรอ , แบริ่งกำลังลม , แบริ่งการขนส่ง , แบริ่งเครื่องมือเครื่องจักร , ลูกปืนเครื่องจักร , ลูกปืนเครื่องจักร , แบริ่งงานกัดโลหะและแบริ่งมอเตอร์ฯลฯ
วัสดุใหม่ที่พัฒนาโดยบริษัทของเราสามารถใช้กับผลิตภัณฑ์แบริ่งระดับสูงได้ การใช้พลังงานต่ำอายุการใช้งานที่ยาวนานและคุณภาพของผลิตภัณฑ์ของเราได้รับความนิยมจากผู้ใช้ทั้งในประเทศจีนและต่างประเทศ แบริ่งโรลเลอร์ทรงกระบอกแบบสั้นพิเศษ , แบริ่งราง , เครื่องรับพลังงานลมชนิดต่างๆของผลิตภัณฑ์ได้แก่ : แบริ่งโรลเลอร์ทรงกระบอก ( แถวเดียวและสองแถว ), แบริ่งบอลแบบร่องลึก , แบริ่งแบบทรงกลมทรงเรียว , โรลเลอร์ทรงกลมและแบริ่งบอลปรับแนวเอง , แบริ่งแบบสัมผัสเชิงมุม ( แถวเดียวและสองแถว ) ลูกกลิ้งกันรุนและลูกปืนลูกปืนลูกปืนเพลาข้อเหวี่ยงและลูกปืนที่ไม่ใช่มาตรฐานฯลฯประเภทของผลิตภัณฑ์ตามเกณฑ์การใช้งานในสาขาต่างๆได้แก่ลูกปืนในอากาศยานลูกปืนในโครงการทหารรถลากจูงผู้โดยสารและรถไฟที่สึกหรอลูกปืนในรถยนต์ ( พลังงานใหม่ ), ลูกปืนกำลังลม , ลูกปืนในการขนส่ง , ลูกปืนเครื่องมือของเครื่องจักร , ลูกปืนในเครื่องจักร , การผลิตและการผลิตมอเตอร์โรงงานผลิตโลหะผสมมี
ศูนย์กลางเทคโนโลยีของบริษัทระดับชาติและบริษัทเทคโนโลยีขั้นสูงระดับจังหวัดจำนวนมากมีความแข็งแกร่งทางเทคนิคสูง นอกจากนี้บริษัทยังผ่านการรับรองมาตรฐาน ISO 9001, ISO14001, TS16949, ห้องปฏิบัติการและระบบการจัดการสิ่งแวดล้อมอื่นๆ
บริษัทได้สร้างเครือข่ายการขายที่ดีและระบบบริการ ผลิตภัณฑ์ของบริษัทมีการจำหน่ายทั่วประเทศจีนส่งออกไปยังยุโรปและสหรัฐอเมริการวมถึงประเทศ / พื้นที่พัฒนาอื่นๆ บริษัทได้รับรางวัล "China Stent 100 อันดับแรกของอุตสาหกรรมเครื่องจักร ", "Advanced Management Enterprise of Bearing Industry in China", "National Integrity Demorit", "National Green Enterprise", "National AAA-Class Enterprise ในเรื่องการรักษาสัญญาและการให้เครดิตเป็นต้นทุน ", เป็นต้นบริษัทได้รับการจัดอันดับให้อยู่ในกลุ่มอุตสาหกรรมที่มีทิศทางสูงสุดในด้านมุมมองของความแข็งแกร่งทางการเงินขนาดการผลิตความแข็งแกร่งทางเทคนิคและประสิทธิภาพการขายฯลฯ