ข้อมูลพื้นฐาน
ไม่ใช่ ของรุ่น
50x50x5x900mm
Name
11kv Anchoring Electric Pole Steel Cross Arm
Galvanized
Hot-DIP Galvanized
Used for
Support and Connect Fitting
Life Time
More Than 20 Years
Type
According to Your Drawings
เครื่องหมายการค้า
no mark
รหัสพิกัดศุลกากร
7326909000
คำอธิบายสินค้า
Name: 11kv anchoring cross arm with tie strap
Electric power fitting --11kv anchoring cross arm with tie strap dimensions:
The dimensions on the drawings are the final dimensions after the hot dip galvanization. The design of the fittings is indicative; However the mentioned dimensions on the drawings are the critical ones.
Electric power fitting--11kv anchoring cross arm with tie strap galvanization
The fittings shall be delivered hot dip galvanized according to the following specifications:
	the zinc of the electric power fitting that shall be used shall have the quality of minimum category prime western according to the category according to.
	then washed out with water and then flux treated and dried out.
	the hot dip galvanization shall be made in a zinc bath of temperature 450 and of zn-composition min. 98.5percent.
	the galvanization thickness of the electric power fitting shall be in average 80 thick! On an isolated piece or on a small part of the surface the thickness can be a little lower, however on all pieces and on all surfaces the minimum thickness shall be 78 and the average weight in relation to the galvanized area shall be 610.
	the pieces of the electric power fitting shall be after free from black stains, enclosures of dirt, knobs, bubbles or any other surface defects. The hdg shall be smooth and uniform in the entire piece without any spots with too small or too big galvanization thickness otherwise the pieces will be rejected.
	the galvanization shall stick very well on the steel structure; It shall not be removed as a film but shall be as one with the steel body
Electric power fitting--11kv anchoring cross arm with tie strap testing:
The fittings shall be fixed in a mechanical testing device as similar as possible with the assembly later during use
Electric power fitting ---11kv anchoring cross arm with tie strap packing:
All materials of the electric power fitting shall be packed in wooden / bags cases of maximum weight of every wooden box 25 kg. The wooden cases shall be suitable for the transport of the pieces without damaging the galvanization, and shall allow air to circulate and the used wood shall be completely dry in order to avoid any corrosion of the fittings.
ที่อยู่:
Renqiu City, Cangzhou, Hebei, China
ประเภทของธุรกิจ:
ผู้ผลิต/โรงงานผลิต
ขอบเขตธุรกิจ:
เครื่องจักรการผลิตและแปรรูป, ไฟฟ้าและอุปกรณ์อิเล็กทรอนิกส์
การรับรองของระบบการจัดการ:
ISO 9001
แนะนำบริษัท:
เราเป็นผู้ผลิตอุปกรณ์ปรับกำลังไฟฟ้าที่มีประสบการณ์ 11 ปี ผลิตภัณฑ์ของเราส่งออกไปยังหลายประเทศและเราได้รับการยกย่องจากลูกค้าเป็นจำนวนมาก เรามีวิศวกรพิเศษที่จะแบกรับงานวิจัยและการสำรวจ และเราได้จัดตั้งแผนกการตลาดที่มีคุณภาพขึ้นด้วยห้องปฏิบัติการทดสอบคุณภาพ การพัฒนาบริษัทขึ้นอยู่กับคุณภาพผลิตภัณฑ์ที่ดีและบริการที่ดีที่สุดรวมถึงความพยายามของลูกค้า ผมหวังว่าเราจะได้รับการติดต่อจากคุณมากขึ้นเพื่อที่คุณจะได้เข้าใจบริษัทของเราอย่างลึกซึ้ง