การฉีดพ่นอัตโนมัติ

1 Choose where you want to place / hang your device. The screw provided inside the device can be used for wall mounting.
2 To open, press the button on top of the device and open the front cover.
3 Check that the ON/OFF switch is in the OFF position. Insert 2 AA (1.5v) following the correct polarity.
4 Check that the red mechanism is in the raised position. If it is down and preventing the spray nozzle being inserted correctly, then gently push it up with a pencil. Insert the refill into the diffuser: Place the aerosol on the platform inside, with the spray nozzle facing forwards.

5 Set the timer switch to your chosen interval between sprays: 9, 18 or 36 minutes to achieve 15 / 30 / 60 days of continuous fragrance respectively.
6 Direct the device away from the face before switching on. Start the device by placing the switch to "ON". When activated, a flashing green light indicates that the device is working and it will spray after a delay of 15 seconds. If there is no green light, check the batteries re inserted correctively. If it fails to spray, follow the TROUBLE-SHOOTING instructions below. Batteries will require replacing when the green light stops flashing.
7 Close the device and place it where chosen before the next spray (9, 18, 36 minutes) ensuring it is secured properly on the screw.
8 If you change the time setting after installation, switch off the device, alter the time setting and switch the device back on. Do not switch the device to the ON position without refill inside