เครื่องพิมพ์โลหะระบบการผลิตสารเติมกัดโค้งแบบหุ่นยนต์อุตสาหกรรมขนาดใหญ่ Arcman1.

 Wire Arc Additive Manufacture (WAAM) is a layer-by-layer cladding principle that uses MIG, TIG, and PA ) And other welding machine as the heat source, through the addition of wire, under the control of software programs, according to the three-dimensional digital model from the line-plane-body gradually formed from the advanced digital manufacturing technology of metal parts.

The principle of WAAM technology

Compared with the traditional casting and forging process, it requires no molds, has a short overall manufacturing cycle, has a high degree of flexibility, can realize digital, intelligent and parallel manufacturing, and has a fast response to design. It is especially suitable for the manufacture of small batch and multi-variety products.

Features of WAAM

1 WAAM not only has the advantages of high deposition efficiency, high utilization of wire materials, short overall manufacturing cycle and low cost, less restrictions on part size, easy repair of parts, etc., but also the ability of in-situ composite manufacturing and forming large-size parts.

2 Excellent micro structure and mechanical properties of materials made by casting technology;

3 Save more raw materials than forging technology products, especially precious metal materials;

4 WAAM pursues prototype manufacturing, which pursues low cost and high efficiency instead of high precision, so the requirements for forming accuracy are not harsh.

(Requires 2 machining operations)

5 Compared with the additive manufacturing technology using laser and electron beam as the heat source, it has the advantages of high deposition rate and low manufacturing cost;

6 Compared with the additive manufacturing technology that uses laser as the heat source, it is not sensitive to metal materials and can be formed into materials with high laser reflectivity, such as aluminum alloys and copper alloys;

7 Compared with SLM technology and electron beam additive manufacturing technology, WAAM technology also has the advantage that the size of manufacturing parts is not limited by the size of the equipment forming cylinder and vacuum chamber.

Application field

Introduction of WAAM System ArcMan S1

Core Technology
1.The 3D printer uses the arc additive manufacturing technology (WAAM) as the core, and uses the layer-by-layer surfacing method to manufacture metal solid components, mainly based on TIG, MIG/MAG, PLASMA and other welding technologies. The formed parts are composed of arc fuses. The chemical composition is uniform and the density is high. The open forming environment has no theoretical limit on the size of the formed part, and the forming rate can reach 1.5-5kg/h.
2.The ArcMan 600 3D printer consists of two parts: hardware and software. The software is the self-developed IungoPNT control software, which is mainly used for layered slice control of arc additive manufacturing; the hardware system is mainly composed of industrial robot and digital fuse power.