ข้อมูลพื้นฐาน
ลักษณะของโฟลว์ต้นทาง
พาสซีฟอินเวอร์เตอร์
การรับรอง
SAA, CE, RoHS, ISO 9001
แหล่งจ่ายไฟ
พลังงานแสงอาทิตย์, กำลังลม
รูปแบบทางภูมิประเทศของวงจร
ประเภทผลัก - ดึง
ลักษณะของสตริงช่วง
อินเวอร์เตอร์ของคลื่น Sine
รหัสพิกัดศุลกากร
8541402000
คำอธิบายสินค้า
MPPT Solar Hybrid Charge Inverter 80A Controller Max 3500W Pure Sine Wave Inverter 48V 110V PV Volt 145V 50Hz 60Hz Off-Grid
Overview:
HF series is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has high response speed, high reliability and high industrial standard. Four charging modes are optional, i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; and two output modes are available, i.e. Inverter and Mains, to meet different application requirements. The solar charging module applies the latest optimized MPPT technology to quickly track the maximum power point of the PV array in any environment and obtain the maximum energy of the solar panel in real time. Through a state of the art control algorithm, the AC-DC charging module realizes fully digital voltage and current double closed loop control, with high control precision in a small volume. Wide AC voltage input range and complete input/output protections are designed for stable and reliable battery charging and protection. Based on full-digital intelligent design, the DC-AC inverter module employs advanced SPWM technology and outputs pure sine wave to convert DC into AC. It is ideal for AC loads such as household appliances, power tools, industrial equipment, and electronic audio and video equipment. The product comes with a segment LCD display design which allows real-time display of the operating data and status of the system. Comprehensive electronic protections keep the entire system safer and more stable.
Feature:
1.Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.
2.Two output modes: mains bypass and inverter output; uninterrupted power supply.
3.Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.
4.Advanced MPPT technology with an efficiency of 99.9%.
5.Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.
6.ON/OFF rocker switch for AC output control.
7.Power saving mode available to reduce no-load loss.
8.Intelligent variable speed fan to efficiently dissipate heat and extend system life.
9.Lithium battery activation design, allowing access of lead-acid battery and lithium battery.
10.360 ° all-round protection with a number of protection functions.
11.Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.
1. PV module: Convert light energy into DC power, and charge the battery through the all-in-one solar charge inverter, or directly invert into AC power to drive the load.
2. Mains or generator: Connected at the AC input, to power the load while charging the battery. If the mains or generator is not connected, the system can also operate normally, and the load is powered by the battery and PV module.
3. Battery: Provided to ensure normal power supply to the system loads when solar energy is insufficient and the Mains is not connected.
4. Household load: Allow connection of various household and office loads, including refrigerators, lamps, TVs, fans and air conditioners.
5. All-in-one solar charge inverter: The energy conversion unit of the whole system.
Charging mode:
1) PV priority: PV module will charge the battery preferentially, and the battery is charged by the Mains only when the PV system fails. During the day, solar energy is fully used to charge, while at night, it converts to the Mains. This can maintain battery level, and is ideal for areas where the grid is relatively stable and electricity price is relatively high.
2) Mains priority: The Mains supply is preferentially used to charge the battery. Only when the Mains fails, the PV charging can be activated.
3)Hybrid charging: PV and mains hybrid charging. PV MPPT charging is a priority, and when PV energy is insufficient, the mains supply supplements. When the PV energy is sufficient again, the mains stops charging. This is the fastest charging mode, suitable for the areas where power grid is unstable, providing sufficient backup power supply at any time.
4)Only Solar (Only Solar): Only PV charging, without Mains charging. This is the most energy-efficient way in which battery is charged only by solar panels, and is usually used in areas with good lighting conditions.
Technical parameters:
| Models | HF4825U80 -145 | HF4830U80 -145 | HF4835U80 -145 |
| AC mode |
| Rated input voltage | 110/120Vac |
| Input voltage range | (90Vac~140Vac)±2% |
| Frequency | 50Hz/ 60Hz (Auto detection) |
| Frequency Range | 47±0.3Hz ~ 55±0.3Hz (50Hz); 57±0.3Hz ~ 65±0.3Hz (60Hz); |
| Overload/shor t circuit protection | Circuit breake |
| Efficiency | >95% |
| Conversion time (bypass and inverter) | 10ms (typical) |
| AC reverse protection | Available |
| Maximum bypass overload current | 40A |
| Inverter mode |
| Output voltage waveform | Pure sine wave |
| Rated output power (VA) | 2500 | 3000 | 3500 |
| Rated output power (W) | 2500 | 3000 | 3500 |
| Power factor | 1 |
| Rated output voltage (Vac) | 120Vac |
| Output voltage error | ±5% |
| Output frequency range (Hz) | 50Hz±0.3Hz 60Hz±0.3Hz |
| Maximum Efficiency | >91% |
| Overload protection | 102% < load <110%)±10%: report error and
turn off the output after 5 minutes;
(110% < load < 125%)±10%: report error and
turn off the output after 10 seconds;
(Load >125%±10%): report error and turn off
the output after 5 seconds; |
| Peak power | 4000VA | 4500VA | 5000VA |
| Loaded motor capability | 1HP | 2HP | 2HP |
| Rated battery input voltage | 48V (Minimum starting voltage 44V) |
| Battery voltage range | Undervoltage alarm/shutdown voltage/overvoltage alarm /overvoltage
recovery... settable on LCD screen) |
| Power saving mode selfconsumption | Load≤50W |
| AC charging |
| Battery type | Lead acid or lithium battery |
| Maximum charge current(can be set) | 0-40A |
| Charge current error | ±5Adc |
| Charge voltage range | 40-60Vdc |
| Short circuit protection | Circuit breaker and blown fuse |
| Circuit breaker specifications | 40A |
| Overcharge protection | Alarm and turn off charging after 1 minute |
| PV charging |
| Maximum PV open circuit voltage | 145Vdc |
| PV operating voltage range | 60-145Vdc |
| MPPT voltage range | 60-115Vdc |
| Battery voltage range | 40-60Vdc |
| Maximum output power | 4200W |
| PV charging current range (can be set) | 0-80A |
| Charging short circuit protection | Blown fuse |
| Wiring protection | Reverse polarity protection |
Hybrid charging Max charger current specifications (AC charger+PV
charger) |
| Max charger current(can be set) | 0-120A |
| Certified specifications |
| Certification | CE(EN62109-1) |
| EMC certification level | EN61000, C2 |
| Operating temperature range | -15°C to 55°C |
| Storage temperature range | -25°C ~ 60°C |
| Humidity range | 5% to 95% (Conformal coating protection) |
| Noise | ≤60dB |
| Heat dissipation | Forced air cooling, variable speed of fan |
| Communicatio n interface | USB/RS485(Bluetooth/WiFi/GPRS)/Dry node control |
| Size (L*W*D) | 426mm*322mm*124mm |
| Weight (kg) | 11.8 |
Battery type
Lead-acid Battery :SLD, GEL, FLD, User Lithium Battery
Protections
1.Current limiting protection
2.Night reverse- current protection
3.Mains input overvoltage protection
4.Mains input undervoltage protection
5.Battery overvoltage protection
6.Battery low voltage protection
7.Load output short circuit protection
8.Heat sink over temperature protection
9.Overload protection
10.PV reverse polarity protection
11.AC reverse protection
12.Bypass overcurrent protection
ที่อยู่:
1907, international trade building, No. 999, Chouzhou North Road, Yiwu City
ประเภทของธุรกิจ:
บริษัทการค้า
ขอบเขตธุรกิจ:
ผลิตภัณฑ์คอมพิวเตอร์, อุตสาหกรรมเบาและของใช้ประจำวัน, อุปกรณ์ก่อสร้างและตกแต่ง, อุปกรณ์อิเล็กทรอนิกส์เพื่อการบริโภค, อุปกรณ์และส่วนประกอบอุตสาหกรรม, โลหการ แร่ และพลังงาน, ไฟฟ้าและอุปกรณ์อิเล็กทรอนิกส์, ไฟและแสงสว่าง
การรับรองของระบบการจัดการ:
ISO 9001
แนะนำบริษัท:
บริษัทของเรานำเสนอผลิตภัณฑ์ที่หลากหลายซึ่งสามารถตอบสนองความต้องการแบบหลายด้านของคุณได้ เรายึดมั่นในหลักการบริหาร " คุณภาพต้องมาก่อนลูกค้าต้องมาก่อนและมีการให้เครดิต " นับตั้งแต่ก่อตั้งบริษัทและพยายามอย่างดีที่สุดเสมอเพื่อตอบสนองความต้องการที่อาจเกิดขึ้นของลูกค้าของเรา บริษัทของเรายินดีที่จะร่วมมือกับบริษัทต่างๆทั่วโลกอย่างจริงใจเพื่อสร้างสถานการณ์ที่เป็นหนึ่งในสองฝ่ายของเราเนื่องจากแนวโน้มของโลกาภิวัตน์ทางเศรษฐกิจได้พัฒนาขึ้นโดยมีอำนาจที่ไม่อาจต้านทานได้
