ผู้ดำเนินการเผาทำลายของเสียของบ้าน

Emission Standard: China GB18484

Type of Waste and Treatment Capacity:
1\ House waste.
2\ 5Ton/h.
Noise: 85dB;
3\Fuel: Nature gas or Diesel
4\Ignition: Auto
5\Feeding: Auto
6\Waste gas treatment: High temperature, backset burning, Second Burning, Cyclone dust collector, Spray scrubber, Double layers activated carbon adsorption, Chimney(15M)
7\Burning Temperature:
One: 600-900
Second: 900-1100
8\Valid time on the second burning room: More than 2.0s
9\Internal pressure of furnace: Negative pressure and no backfire
10\floor area: 10m× 14m
11\Drawing of the Incineration's process
In order to meet increasing stringent emission standard for waste incineration flue gas, to ensure the heavy metal and dioxin emissions can comply with the standard, using activated carbon adsorption to assist purification measures. Since activated carbon has a great surface, so even a small amount of activated carbon, as long as the smoke and gas mixed well, and the contact time is long enough, you can achieve a high adsorption purification efficiency. (Generally, every six months, you can open the door to check whether replacement is needed)
Independent chimney
The chimney's total height can ensure the furnace keeping combustion under negative pressure, meanwhile without backfire burning and enhanced operation safety. Set up a permanent sampling hole for environmental testing at any time.
Temperature control system
Through the furnace exit gas temperature sensor signal acquisition, the equipment can set the upper and lower limits for combustion, ensure the different calorific value of waste can burn at a constant temperature.
Electric Generator
Making use of the heat of Second Combuster.
Security system
The ignition machine equipped with safety protection device, once the ignition machine's start is not normal, the safety protection device will automatically cut off the fuel supply. Before the incinerator stop running, (normal and safe cut down procedures), with the combustion chamber cooling process, the temperature dropped to the set value, the cooling process end, the incinerator stop working.
Alarm system
Incinerator power supply indicator, switch
Without water alarm, when water level below the set value, the alarm will alert and automatically stop the incinerator to run, so as to protect the furnace body.
Burning residual timing device will protect the motor not overload.

Grounding and lightning protection
All electrical equipments' normal and without electricity's metal covers are protected by connecting with PE line. The lightning protection device is consisted by three parts: Lightning attractor (lightning rods, lightning protection zone, lightning protection networks and other components) introducing lines, grounding connecting device.
In one site, five sets incinerators will be installed. They use a same chimney. And the total area is about 500M2.
The capacity of generating will accord with the waste character.