ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 
After repeated optimization, the actual feeding size of the crushing chamber is increased. With the design of large stroke and steep elbow angle, the stroke at the bottom of the crushing chamber is larger, the throughput capacity of materials is stronger, and the crushing efficiency is greatly improved.
The rack adopts the separated design of side wall and front and rear walls. The welded rack is replaced by bolted fixation, which avoids the problem of stress concentration caused by welding and makes the structure more compact and reliable.
Wedge adjustment replaces the pad type discharge port adjustment, which can be adjusted mechanically or hydraulically according to needs, so that the discharge port adjustment operation is simpler, time-saving and safer.
Elastic limit blocks and rubber damping devices are used to replace the rigid foundation connection, effectively absorbing the peak load of vibration, thus reducing the mutual impact between the crusher and the foundation, reducing the fatigue damage to the foundation and improving the service life of the crusher.
Key components such as front wall, rear wall, movable jaw body and bearing seat are made of alloy cast steel, and the main shaft is made of forging materials with higher comprehensive mechanical properties, which can withstand high impact load; International brands of bearings and couplings are selected; The large side plate, front wall plate and rear wall plate are all processed by gantry CNC milling.
Integrated motor base, which is fixed on the crusher to save installation space; The pin hinge belt tensioning scheme makes the power transmission more stable and the adjustment more convenient.
C series European jaw crusher is mainly composed of frame body assembly, jaw plate installation assembly, moving jaw assembly, wheel assembly, adjusting device assembly, transmission tension assembly, foundation installation assembly, feed hopper (optional) and protective cover (optional). C series European jaw crushers usually use motor drive as the power source. The motor inputs power to the pulley through SPC belt, and the pulley drives the eccentric shaft to rotate to drive the moving jaw to swing up and down. When the moving jaw plate moves close to the fixed jaw plate, the volume of the crushing chamber decreases, and the materials in the crushing chamber are squeezed or chopped. When the moving jaw plate moves away from the fixed jaw plate, the volume of the crushing chamber increases, and the small pieces of crushed materials in the crushing chamber are discharged from the discharge port, so as to achieve continuous circulation operation and crushing operation.
| Model | Feed Opening Size (mm) |
Max. Feeding Size (mm) |
Discharge Size (mm) |
Capacity (t/h) |
Speed (R/min) |
Power (Kw) |
Outside Dimensions (mm) |
| C80 | 520x800 | 420 | 60-150 | 80-290 | 350 | 75 | 2650*1540*1780 |
| C160 | 700x1060 | 650 | 70-200 | 140-420 | 310 | 110 | 3230*2440*2590 |
| C110 | 850x1100 | 720 | 80-200 | 160-550 | 230 | 160 | 3800*2450*2550 |
| C125 | 950x1250 | 800 | 100-250 | 230-760 | 220 | 160 | 4100*2750*2780 |
| C145 | 1100x1450 | 920 | 125-275 | 320-950 | 220 | 200 | 4400*3060*3210 |
| C160 | 1200x1600 | 1020 | 150-300 | 410-1150 | 220 | 250 | 5700*3650*3550 |
| C200 | 1500x2000 | 1200 | 175-300 | 610-1510 | 200 | 400 | 6500*3990*4260 |
ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 
