ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 2022 Kaishan New Kg430s 25m 100mm Blast Hole Drilling Machine for Mine
KG430/KG430H Down The Hole Drill Rig For Open Use
The KG430/KG430H down-the-hole drill rig for open use is an improved device in compliance with national regulations on diesel-engine emissions. Equipped with the Yuchai four-cylinder engine (China III), the drill rig meets national standards for emissions and the environment. The folding frame track and four-wheel drive are adopted, and track levelling and the tramming motor of the plunger piston improve the working pressure and climbing capacity. The expanded pitch and lifting-arm hydraulic cylinder enable it to meet the requirements of limiting position. The double rotation motor increases the rotary torque and revolving speed, and the lifting hydraulic cylinder and chain are expanded to promote the lifting force and reliability. The thickened profile folder is used for the housing, thus improving its level of intensity and rigidity; and the additional ring makes handling and lifting convenient.
The KG430H down-the-hole drill rig for open use is equipped with a dust collector, thus making the operation more environment-friendly and reliable.
-- Safe and stable travelling system
With a low gravity centre and big ground clearance, this drill machine can easily travel on bumpy roads. It is driven by a special wheel motor which brings strong grade-ability and a low failure rate.
-- Powerful and reliable engine
Adopt a famous 4-cylinder diesel engine as the driving force which has advantages of large power, small volume, small vibration, and reliable operation.
| Technical Parameters | ||
| Model of drill rig | KG430 | KG430H |
| Weight of complete machine | 5250KG | 5700KG |
| Outer dimensions | 6300*2250*2700mm | 6300*2400*2700mm |
| Drilling hardness | f=6-20 | |
| Drilling diameter | Φ90-152mm | |
| Depth of economical drilling | 25m | |
| Rotary speed | 0-90rpm | |
| Rotary torque (Max) | 5000N.m(Max) | |
| Lifting force | 40KN | |
| Method of Feed | Oil cylinder+eaf chain | |
| Feed stroke | 3175mm | |
| Travelling speed | 0-2.5Km/h | |
| Climbing capacity | ≤30° | |
| Ground clearance | 500mm | |
| The tilt angle of the Beam | Down: 110°, up:35°, total: 145° | |
| Swing angle of the boom | Left: 91°, right: 5°, total: 96° | |
| Pitch angle of drill boom | Down: 55°, up:15°, total: 70° | |
| Swing angle of drill boom | Left: 32°,right: 32°, total: 64° | |
| Leveling angle of the track | ±10° | |
| Compensation length of the beam | 900mm | |
| Supporting power | Yuchai YC4DK80-T302 (58KW / 2200r / min) KG430 Yuchai YC4DK100-T304 (73KW / 2200r / min) KG430H |
|
| DTH hammer | K40 | |
| Drilling rod | Φ76*2m+Φ76*3m | |
| Air consumption | 13-20m³/min | |
| Maximum height of the horizontal hole | 2850mm | |
| Minimum height of the horizontal hole | 350mm | |
- Powerful feed mechanism and rotating system
Optimally designed luffing mechanism and round drilling boom with the advantages of neoteric structure and easy maintenance greatly improves the drilling hole's coverage area. That also makes low-order horizontal hole drilling available.
Worldwide Factories Make After-Sale Worry-Free!
Q1: Are you a factory or trade company?
A1: We are a factory. And we have ourselves trading company.
Q2: What is the exact address of your factory?
A2: Our Company is located in JNo.9 Kaixuan Ave West, Economic Zone Quzhou, Zhejiang, China
Q3: How long is your air compressor machine warranty?
A3: One year for the whole machine and two years for the screw air end, except for consumable spare parts.
Q4: Will you provide some spare parts for the machines?
A4: Yes, of course.
05: What about the voltage of products? Can they be customized?
A5: Yes, of course. The voltage can be customized according to your requirement.
Q6: Which payment term can you accept?
A6: 30% T/T in advanced, 70% T/T against the B/L copy.
Q7: How long will you take to arrange production?
A7: 380V 50HZ we can deliver, the goods within 7-15 days. Other electricity or other colors we will delivery within 25-30 days.
Q8.What about the maintenance?
A8: First maintenance needs to be done after 500 hours, and then every 2000-3000 hours to do the normal maintenance, and consider the actual environment.
Q9: Can you accept OEM orders?
A9: Yes, with a professional design team, OEM orders are highly welcome.
Q10: Which trade term can you accept?
A10: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.
ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 
