Log Processing Woodworking Machinery Push Table Saw Operation Is Simple

• บริการหลังการขาย: 1 ปี
• เกรดอัตโนมัติ: Semi-Automatic
• ประกันการรับประกัน: 1 ปี
• จุดขายหลัก: ระดับความปลอดภัยสูง
• แรงดันไฟฟ้า: 380v หรือแรงดันไฟฟ้าที่ลูกค้ากำหนด
• การรับประกันส่วนประกอบหลัก: 1 ปี
• ไม่ใช่ ของรุ่น: CT1500 CT2000 CT3000 TT1500 TT2000 TT3000
• เงื่อนไข: ที่มีให้
• น้ำหนัก ( กก .): 1000 กก
• รุ่น: mj107 z
• การตรวจสอบการส่งวิดีโอ: ที่มีให้
• เส้นผ่านศูนย์กลางไม้: 400mm-480 มม
• ความยาวของไม้: 1500 มม
• อย่างมีสไตล์: แนวนอน
• กำลัง ( กิโลวัตต์ ): 7.5 kw* 2 15kW) 2
• เครื่องหมุนเบลด: 500 มม
• ความจุ: 2900r/ นาที
• ความยาวราง: 3500 มม .-66500 มม
• ใบเลื่อย: ใบเลื่อยคาร์ไบด์
• แพคเพจการขนส่ง: Iron Frame/According to Customer Requirements
• ข้อมูลจำเพาะ: 2500*1800*2100mm
• เครื่องหมายการค้า: Sawmill World
• ที่มา: Shandong Zouping
• กำลังการผลิต: 3-5m/Min

คำอธิบายสินค้า

Product Description

Wood Sliding Table Sawmill

 

Push table saw through dynamic balance or static balance, generally do not need the foundation, placed on the flat ground can be added. During processing operation, logs are placed on the mobile workbench, and the mobile workbench is pushed manually/automatically to realize the feed movement of logs. The operation is very convenient, flexible operation should always pay attention to safety, to prevent the occurrence of accidents.

 

Model	CT1500	CT2000	CT3000
Max Sawing Wood Diameter	400mm	400mm	400mm
Max Sawing Wood Length	1500mm	2000mm	3000mm
Circular Saw Blade Diameter	500mm	500mm	500mm
Rail Length	3500mm	5000mm	6500mm
Wood Fasten Model	Pneumatic Up/Down
Carriage Rail	Linear Axis
Motor Power	7.5KW*2	7.5KW*2	7.5KW*2
Feeding Method	Motor Variable Speed System
Set Saw Cutting Dimensions	Computer Touch Screen Control

Model	TT1500	TT2000	TT3000
Max Sawing Wood Diameter	400mm	400mm	400mm
Max Sawing Wood Length	1500mm	2000mm	3000mm
Circular Saw Blade Diameter	500mm	500mm	500mm
Rail Length	3500mm	5000mm	6500mm
Wood Fasten Model	Pneumatic Up/Down
Carriage Rail	Linear Axis
Motor Power	7.5KW*2	7.5KW*2	7.5KW*2

Detailed Photos

 

Matters needing attention

1. Clean the area around the table saw and the table surface.
2. Check whether the saw blade is sharp and whether the size and size of the saw blade are in line
3. Test machine: It takes about 1 minute to check whether the machine runs normally and check the rotation direction of the big and small saw blades to ensure the correct rotation direction of the saw blades.
4. Put the prepared plate on the pushing bed and adjust the size of the gear position.

5. Start cutting. Note:
 A. plate should be close to the block, can not move.
 B. Adjust the cutting speed according to the thickness and hardness of the plate, and push the machine at a uniform speed, not too fast or too fast.
 C. When opening small material, the wood strip should be pressed and pushed.
 D. Operators should wear face masks, do not wear gloves, do not wear loose clothes, do not wear long hair.
 E. Do not directly take things by hand beside the rotating saw blade. If necessary, other long auxiliary materials can be used to push them away before taking them.
6. If the edges and corners of the plates are defective, the saw blades should be replaced.
7. After the cutting task is completed, turn off the power and make 5S of the saw table and its surroundings.

In addition to the necessary control tasks, the operator of the table saw should overcome the adverse posture of standing and bending for a long time, as well as the influence of artificial lifting, vibration and noise and other adverse working environment on the body. In the woodworking table saw operation post, the problem of working fatigue is especially serious. The working fatigue of this post will not only cause the decline of working efficiency, but also may lead to human error accidents and waist injuries of operators. The fatigue of many people may also form accident hidden danger.

Related products

Heavy Duty Circular Sawmill With Table

 

Specification	MJ105Z	MJ109Z
TCT Circular Saw Blade Diameter	Φ500mm	Φ900mm
Max Sawing Wood Thickness	160MM	360MM
Working table size	1500×800mm	1500×800mm
Spindle power	1500r/min	1500r/min
Motor power	7.5KW/380V	18.5KW/380V
Weight	480KG	550KG

Specification	MJ105-2	MJ106
saw blade dia.	Φ500mm	Φ600mm
Working table size	900mm×750mm	900mm×750mm
Spindle power	2340r/min	2340r/min
Motor power	7.5KW/380V	7.5KW/380V

 

Why choose us?

More than 30 years manufacturing experience
Exported more than 70 countries all over the world
24h-after service at any time
Profitable offer
14 years of experience in foreign trade exports,rich machine production experience
Widely recommended by local customers