ข้อมูลพื้นฐาน
ฟังก์ชัน
การควบคุมอัตโนมัติ, การป้องกัน, การตรวจสอบ, การวัด
การรับรอง
CCC, ISO: 9001, CE
เครื่องหมายการค้า
SAFESAV
แพคเพจการขนส่ง
Standard Packaging
ข้อมูลจำเพาะ
online soft starter 380V: 18.5kw~1000kw
รหัสพิกัดศุลกากร
8537109090
คำอธิบายสินค้า
Product Description
1 | Model | SJR3 series soft starter |
2 | Type | LE : E xternal bypass LB : B uilt-in bypass LN :SCR Online without bypass LD :Bypass inside D elta LX :Enhanced Hybrid Bypass |
3 | Rated power | 005~1000 :5.5~1000kW |
4 | Frame No. | The corresponding dimensions of the frame number refer to the appendix. Due to different product technology iterations and different adaptation scenarios, products of the same power may be adapted to different casings. The specific size should be based on the casing number on the order code. |
5 | Mains voltage class | 2 :AC220V-240V 4 :AC380V-440V 6 :AC660V-690V E:AC1140V |
6 | Control voltage level | N :Internal control voltage (default ) D2 :External control voltage DC24V W2 :External control voltage AC220V W4 :External control voltage AC380V |
The L series soft starter is a soft starter developed by our company based on the latest product architecture platform (development code "Leopard") that supports multiple bypass types. Compared with the platform of the previous generation SJR2 series, the "Leopard" architecture has been greatly optimized and improved in software and hardware. Based on the latest 32-bit ARM architecture main control chip, the algorithm performance and functions are further improved. The high-frequency optocoupler-triggered thyristor design replaces the traditional analog pulse drive, which effectively improves the internal conduction efficiency of the thyristor and reduces losses. The built-in power supply design enables the product to adapt to wide voltage fluctuations. The product also has linear temperature detection, adjustable three-phase unbalance tolerance and overload tolerance design, so that it can better adapt to the harsh production environment.
Standards compliant | GB/T 14048.6-2016/IEC 60947-4-2:2011 |
Three phase power | (AC )380V±15%/ 220V±15%/660V±15% |
Frequency | 50Hz/60Hz |
Applicable motors | Squirrel cage three-phase asynchronous motor |
Start frequency | Depending on the load, no more than 20 times per hour are recommended |
Impact resistance | 15gms |
Seismic ability | The vibration force is below 0.5G with the altitude below 3000m. |
Ambient temperature | No derating is needed with the operating temperature between -10 and +40 Between +40 ºC ~+60 ºC,for every 1°C increase, the current decreases by 1.2% ) |
Storage temperature | -25ºC ~+70 ºC |
Environment humidity | 95% No condensation or water droplets |
Maximum working height | No derating within 1000 meters (above 1000 meters, the current is reduced by 0.5% for every additional 100 meters) |
Relative to vertical | The maximum working angle of the installation location is not required |
Detailed Photos
Product Parameters
Standard or light load applications
Motor rated power (kW)+10% to -15% | Max. allowable current | Soft starter rated current | Soft starter model |
230V | 400V | Class 10 application(A) | ICL rated current (A) | |
4 | 7.5 | 17 | 15 | L(1*)-7R5 |
5.5 | 11 | 22 | 21 | L(1*)-011 |
7.5 | 15 | 32 | 29 | L(1*)-015 |
9 | 18.5 | 38 | 35 | L(1*)-018 |
11 | 22 | 47 | 42 | L(1*)-022 |
15 | 30 | 62 | 57 | L(1*)-030 |
18.5 | 37 | 75 | 69 | L(1*)-037 |
22 | 45 | 88 | 81 | L(1*)-045 |
30 | 55 | 110 | 100 | L(1*)-055 |
37 | 75 | 140 | 131 | L(1*)-075 |
45 | 90 | 170 | 162 | L(1*)-090 |
55 | 110 | 210 | 195 | L(1*)-110 |
75 | 132 | 250 | 233 | L(1*)-132 |
90 | 160 | 320 | 285 | L(1*)-160 |
110 | 220 | 410 | 388 | L(1*)-220 |
132 | 250 | 480 | 437 | L(1*)-250 |
160 | 315 | 590 | 560 | L(1*)-315 |
- | 355 | 660 | 605 | L(1*)-355 |
220 | 400 | 790 | 675 | L(1*)-400 |
250 | 500 | 1000 | 855 | L(1*)-500 |
355 | 630 | 1200 | 1045 | L(1*)-630 |
1:Based on bypass type, the above table is applicable for model LN, LE, LB and LX, but not for LD. Please refer to the model descriptions for more details.
2: The above values are given when the maximum ambient temperature of 40°C and the operating environment below 1000m above sea level. The design rated derating caused by high temperature and high altitude should be considered when selecting models.
3: The rated current of the adapted motor cannot exceed the maximum allowable current for
Class 10 applications.
Heavy load applicationsMotor rated power (kW)+10% to -15% | Max. allowable current | Soft starter rated current | Soft starter model |
230V | 400V | Class 20 application(A) | ICL rated current (A) | |
3 | 5.5 | 12 | 15 | L(1*)-7R5 |
4 | 7.5 | 17 | 21 | L(1*)-011 |
5.5 | 11 | 22 | 29 | L(1*)-015 |
7.5 | 15 | 32 | 35 | L(1*)-018 |
9 | 18.5 | 38 | 42 | L(1*)-022 |
11 | 22 | 47 | 57 | L(1*)-030 |
15 | 30 | 62 | 69 | L(1*)-037 |
18.5 | 37 | 75 | 81 | L(1*)-045 |
22 | 45 | 88 | 100 | L(1*)-055 |
30 | 55 | 110 | 131 | L(1*)-075 |
37 | 75 | 140 | 162 | L(1*)-090 |
45 | 90 | 170 | 195 | L(1*)-110 |
55 | 110 | 210 | 233 | L(1*)-132 |
75 | 132 | 250 | 285 | L(1*)-160 |
90 | 160 | 320 | 388 | L(1*)-220 |
110 | 220 | 410 | 437 | L(1*)-250 |
132 | 250 | 480 | 560 | L(1*)-315 |
160 | 315 | 590 | 605 | L(1*)-355 |
- | 355 | 660 | 675 | L(1*)-400 |
220 | 400 | 790 | 855 | L(1*)-500 |
250 | 500 | 1000 | 1045 | L(1*)-630 |
1:Based on bypass type, the above table is applicable for model LN, LE, LB and LX, but not for
LD. Please refer to the model descriptions for more details.
2: The above values are reference values given according to the maximum ambient temperature
of 40°C and the operating environment below 1000m above sea level. The design rated derating
caused by high temperature and high altitude should be considered when selecting models.
3: The rated current of the adapted motor cannot exceed the maximum allowable current for
Class 20 applications
key name | The main function |
RUN | Display (Ready) Press this key to start,and display (Startup) |
STOP | When it is running normally, it will display [Running], press this key to stop, and it will display [Soft Stop] when it is in a soft stop. This key has the function of resetting the fault state. |
SET | Press this key to enter the menu setting, and press it again to exit the menu interface. |
YES | In the setting menu interface, press this key to modify the parameters, the display arrow points to the code setting line, After modifying the parameters, press this key to save, meaning the data has been saved. |
△▽ | Enter the menu setting, enter the code setting line, and press the button to modify the parameters. During operation, this button can observe the grid voltage, radiator temperature, and historical faults during operation. |
Certifications
Installation Instructions
Compatible model | Frame number | Product dimension | Installation size |
H1 | W1 | D | H2 | W2 | Φ |
LN | GS1 | 330 | 155 | 195 | 298 | 95 | M6 |
LN/LE | TM1 | 370 | 210 | 260 | 343 | 150 | M8 |
LN/LE | TL1 | 380 | 320 | 300 | 350 | 250 | M8 |
LN/LE | TXL | 560 | 395 | 317 | 523 | 300 | M8 |
LN/LE | TXXL | 810 | 610 | 391 | 770 | 400 | M12 |
LE/LB | SS1 | 313 | 155 | 187 | 296 | 128 | M6 |
LE | SM1 | 407 | 270 | 245 | 352 | 237 | M8 |
LE | SL1 | 461 | 300 | 265 | 393 | 263 | M8 |
LB | SM2 | 513 | 270 | 245 | 481 | 237 | M8 |
LE | GS2 | 273 | 145 | 165 | 250 | 135 | M6 |
LN | GS3 | 270 | 160 | 205 | 250 | 145 | M6 |
Company Profile
FAQ
Q1:Can I have a sample order?
A1:Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2:What about the lead time?
A2:Sample needed 3-5 days, mass production time needed 1-2 weeks.
Q3:Do you have any MOQ limit?
A3:1pc for sample checking available.
Q4:How do you ship the goods and how long does it take to arrive?
A4:We usually ship by DHL, UPS, Fedex or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping for option.
Q5:Is it OK to print my logo on modified sine wave inverter?
A5:Yes. Please inform us formally before our production and confirm the design firstly based on the sample.
Q6:Do you offer quarantee for the products?
A6:Yes, we offer 18 months warranty.
Q7:Can I get one for sample?
A7:Yes, we accept sample order or trial order for testing first.
Q8:What's the price and MOQ??
A8:NO MOQ. Please just send us inquiry, your inquiry will be replied within 24 hours, we will let you know the latest price.
Q9:What's you delivery time?
A9:It depends on your quantity, usually 1-3 days for sample order, but for batch order, it according to theactual situation.
Q10:How about your payment and shipment?
A10:Payment: We accept T/T, Western Union, Paypal etc. terms of payment.
Shipment: For sample order, we use DHL, TNT, FEDEX, EMS etc.express; for batch order, by sea or by air.
Q11:How about your warranty?
A11:We provide 1.5 and 2 years warranty for different products and whole life technical support.
ที่อยู่:
22 Liujiang Avenue, Liushi Town, Yueqing City, Wenzhou, Zhejiang, China
ประเภทของธุรกิจ:
ผู้ผลิต/โรงงานผลิต
ขอบเขตธุรกิจ:
ไฟฟ้าและอุปกรณ์อิเล็กทรอนิกส์
การรับรองของระบบการจัดการ:
ISO 9001
แนะนำบริษัท:
Av ซึ่งมุ่งเน้นในเรื่องของอุปกรณ์ไฟฟ้าแรงดันสูงและแรงดันไฟฟ้าต่ำอุปกรณ์ระบบไฟฟ้าที่ครบวงจรและอุปกรณ์ระบบอัตโนมัติสำหรับอุตสาหกรรม ผลิตภัณฑ์ของเราได้รับการพัฒนาให้สามารถใช้ได้กับโครงการสำคัญของประเทศเช่นงาน Shanghai World Expo สนามกีฬาโอลิมปิกที่ปักกิ่งโครงการเขตการผลิตน้ำประปาจากใต้ไปเหนือสนามบินนานาชาติ Pudong ในขณะเดียวกันโรงงานได้รับการยอมรับว่าเป็นบริษัทที่มีเทคโนโลยีระดับสูงบริษัทด้านวิทยาศาสตร์และเทคโนโลยีบริษัทซอฟต์แวร์บริษัทที่มีความก้าวหน้าด้านการบริหารจัดการคุณภาพฯลฯ
บริษัทของเราร่วมมือกับพันธมิตรจากหน่วยงานวิจัยที่โดดเด่นของมหาวิทยาลัยเช่นสำนักงานวิศวกรรมเครื่องกลและไฟฟ้าและสถาบันระบบอัตโนมัติของมหาวิทยาลัยเซี่ยงไฮ้ สถาบันเทคโนโลยีและสารสนเทศแห่งมหาวิทยาลัยฟู้แบบมีเครื่องช่วย หลังจากการปรับโครงสร้างโรงงานจะทำการวิจัยและผลิตอุปกรณ์ระบบอัตโนมัติระดับอุตสาหกรรมขั้นสูงเพิ่มเติมตามความสำเร็จที่ผ่านมาในสาขาของสตาร์ทเตอร์ที่นุ่มนวลและการขับเคลื่อนความถี่แปรผัน
ข้อมูลสรุปประวัติการพัฒนาของบริษัท
ในปี 2000 - บริษัทเริ่มผลิตรถยนต์ไธริสเตอร์ซอฟต์สตาร์ทเตอร์รุ่นแรกได้รับการพัฒนาด้วยการวิจัยอย่างเป็นอิสระทำให้บริษัทของเราเป็นผู้ผลิตรายแรกของจีนที่เริ่มผลิตรถยนต์รุ่นใหม่ในปี
2003 โรงงานได้ย้ายไปเซี่ยงไฮ้
ในปี 2005 - ผู้เริ่มต้นใช้งานอย่างชาญฉลาดเป็นคนที่สองและการขับเคลื่อนด้วยความถี่แปรผันได้รับการรับรองว่าเป็นความสำเร็จในการเปลี่ยนแปลงเทคโนโลยีใหม่และเทคโนโลยีที่ทันสมัยของเซี่ยงไฮ้
ในปี 2006 มีการระบุว่าเป็นบริษัทที่ใช้เทคโนโลยีขั้นสูงของเซี่ยงไฮ้
ในปี 2007 ที่ผ่านมาการขับเคลื่อนด้วยความถี่แปรผันได้ถูกนำมาใช้ในการผลิตขนาดใหญ่
ย้ายไปอยู่ในเขตพัฒนาทางการและเทคโนโลยีของ Caohejing Economic และเทคโนโลยีของเมืองเซี่ยงไฮ้
ในปี 2008 ผลิตภัณฑ์ได้ถูกนำไปใช้กับศูนย์ว่ายน้ำและศูนย์ยิงประตูของโอลิมปิกเกมส์ที่ปักกิ่งเป็นชุดๆ
ในปี 2010 มีการนำผลผลิตมาใช้ในงาน Shanghai World Expo การ
สร้างความสัมพันธ์ระหว่างนักศึกษากับแผนกออปโตอิเล็กทรอนิกส์ในมหาวิทยาลัย Fuan และจัดห้องวิจัยอินเวอร์เตอร์ด้วยไฟฟ้าถ่ายภาพ
ในปี 2014 ได้มีการปรับเปลี่ยนและย้ายไปยังเขตพัฒนาเศรษฐกิจและเทคโนโลยีแห่งชาติของเมืองเซี่ยงไฮ้สร้าง
ความสัมพันธ์เชิงกลยุทธ์กับกลุ่มเมืองเฉอลและกลุ่มผู้ให้บริการรายเดียวของการพลิกฟื้นส่วนประกอบสำคัญของผลิตภัณฑ์ไฟฟ้า EPS สำหรับสองกลุ่ม
ในปี 2015 บริษัทได้พัฒนาอุปกรณ์ที่จำเป็นและนำไปผลิตเพื่อทดลอง
ในขณะที่ทีมวิจัยมืออาชีพของเซอร์โวมอเตอร์และเซอร์โวคอนโทรลเลอร์ได้รับการจัดระเบียบ
ในปี 2016 เริ่มต้นอย่างรวดเร็วกระชับไม่มีการตั้งค่าเริ่มต้นใหม่บริการเริ่มต้นที่ไม่มีข้อผิดพลาดที่ไม่มีการบีบอัดข้อมูลที่เริ่มต้นไม่มีข้อผิดพลาดที่ชื่อ SJR3-N ได้รับการพัฒนาสำเร็จและนำไปสู่การทดลองผลิต
ผลิตภัณฑ์ประเภทต่างๆมีจำหน่ายในบริษัทของเรา เรายินดีที่ได้รับการสอบถามของคุณและเราจะตอบกลับโดยเร็วที่สุด เรายึดมั่นในหลักการ " คุณภาพมาก่อนให้บริการเป็นอันดับแรกปรับปรุงอย่างต่อเนื่องและสร้างนวัตกรรมใหม่เพื่อตอบสนองความต้องการของลูกค้า " สำหรับการจัดการและ " ข้อบกพร่องเป็นศูนย์ข้อร้องเรียนเป็นเป้าหมายด้านคุณภาพ