เครื่องขึ้นรูปขนาด 6 * 9 ฟุตสำหรับเครื่องเล่น OSB

Particle board/ Chip board production line, is using small diameter logs. tree branches and twigs, industrial wood residue as raw materials to produce gradual changing structured or homogeneous particle board. Applications include furniture, construction, packaging, vehicles, ships and so on. 

Production process: the production line is divided into 4 working sections: Flake preparation, Drying and sifting section, Glue mixing and blending section, Forming/Press/Sanding section. Between the sections there is electrical interlock. When unlocked, single machine can be controlled individually.

1) Chip preparation section

Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip bin, and then feed to the knife ring flaker by which the chips are turned to flakes, then the flake stored in wet flake bin.

2) Drying and sifting section                

The flskes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to mill to be recrushing, and  transported to surface flake bin.

4) Forming and hot-pressing section

The surface and core flakes are sent into classi forming machine, and forming on the mat conveyor uniformly. After process of metal remover , pre-press, lengthwise saw, cross saw,accelerate conveyor,scaling conveyor , 

storing conveyor and loading conveyor,mats are transported to carrier and then to hot pressing. Rough boards after pressing are pushed to unloader via pallet.

5) Cooling and sizing section 

The rough board is conveyed to star cooler for cooling ,then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.

6) Sanding section     

The board are sanded,checked and stored. PLC control is used in mat-forming section.