Etco2 เซ็นเซอร์หลัก Et100 CO2 โมดูลสำหรับการใช้งานในสัตว์เลี้ยงตามโปรโตคอลของโมดูล Respironics

• การปรับแต่ง: มีอยู่
• การจัดประเภท: ฟังก์ชันทางกายภาพของอุปกรณ์วินิจฉัยและตรวจสอบ
• พิมพ์: ผู้ดูแลผู้ป่วย / ร่างกาย / มารดา
• ไม่ใช่ ของรุ่น: ET100
• การรับรอง: CE, MSDS, ISO13485
• กลุ่ม: ผู้ใหญ่ , นิวโอ , เป็ด
• พารามิเตอร์: EtCO2 Sensor
• แพคเพจการขนส่ง: กล่องกระดาษ
• ข้อมูลจำเพาะ: ไซด์สตรีม
• เครื่องหมายการค้า: ronseda
• ที่มา: จีน

คำอธิบายสินค้า

H

Details:

Product Introduction

The ET100 Sensor is a highly integrated mainstream CO₂ Sensor which developed by RSD medical, who had tens of years IR measurement instrument development experience. It's the one-step capnography solution for patient monitoring system. Within a very compact size, it provides measurement of End-Tidal Carbon Dioxide(ETCO2), respiration rate, capnogram, which can cover most of requirement from the patient monitoring system. With a very simple RS232 interface and industry compatible protocol, it's fairly easy to connect ET100 to any patient monitoring system and other medical treatment system where CO2 sensor is needed.

With the stability, flexibility and easy to use as the built in essence, ET100 is your ideal choice for your capnography subsystem.

 

Product Features

1.Real time CO₂ monitoring and data upload

2.Dual wavelength , non-dispersive infrared(NDIR)

3.With fast electrical modulation MEMS IR source, moving part was avoid and long lifetime was achieved

4.Includes temperature control system, to prevent airway adapter condensing

5.Barometer pressure and Gas temperature compensation

6.Patent on calibration algorithm, no routine user calibration required

7.Small size and lightweight

 

SPECIFICATIONS

Transducer Type	Mainstream CO2 Sensor
Principle of Operation	Non-dispersive infrared(NDIR), dual wavelength, no moving parts
Initialization Time	Capnogram displayed in less than 5 seconds,full specifications within 2 minutes
CO2 Measurement Range	0 - 114 mmHg, 0 - 15 %, 0 - 15.2 kPa(760mmHg)
Rise Time	Less than 60 ms - Adult Reusable or Single-Patient-Use Airway Adapter Less than 60 ms - Infant Reusable or Single-Patient-Use Airway Adapter
CO2 Resolution	0.1mmHg         0 to 59 mmHg 0.25 mmHg        60 to 114mmHg
CO2 Accuracy	0 - 40mmHg       ±2 mmHg 41 - 76 mmHg     ±5% of reading 77 - 114 mmHg    ±8% of reading Above 80 BPM     ±12% of reading
CO2 Stability	Short term drift: Drift over four hours shall not exceed 1 mmHg maximum Long term drift: Accuracy specification will be maintained over a 120-hour period
Sampling Frequency	100 Hz
Respiration Rate Range	2 to 150 Breaths Per Minute (BPM)
Respiration Rate Accuracy	±1 breath
Compensations (Supplied)	Barometric pressure: 400 mmHg to 800 mmHg Operator selectable O2, N2O, He and agent compensation
Calibration	No routine user calibration required. An airway adapter zero is required when changing
Airway Adapters	Single-patient-use or reusable, < 5 cc dead space (adult), < 1 cc dead space infant
Voltage Requirements	5.0 VDC  ±5%
Power Consumption	1.2Watts typical (Steady State) Up to 1.8 Watts maximum on power up (Warm up)
Interconnection (The RS232 connector version is also provided)	Standard -  Redel 8-pin plastic connector Pin out: 1.       VA           5.0VDC 2.       Shield        Shield 3.       DGND        Digital return 4.       VSRC         5.0VDC 5.       TxD          Serial data from Sensor 6.       RxD          Serial data from Host 7.       AGND        Analog return 8.       SYNC         Unused
Data Interface	RS232 , bi-directional, 19200 baud rate, standard N-8-1.
Data Output	CO2 gas concentration(mmHg), End-tidal CO2, Inspired CO2, Respiratory Rate. Gas and barometric pressure compensated when supplied by host.
Temperature and Humidity	Operating:  0 to 45ºC, 10 to 90% RH, non-condensing Storage:  -40 to 70ºC, <90% RH, non-condensing
Water Resistance	IPX4 - Splash-proof (sensor head only)

 

 

 
OEM/ODM ARE AVAILABLE!