เครื่องดูดฝุ่นอะลูมิเนียมสแตนเลสสตีลแผ่นกระจกใส Jib เครื่องยกและยกน้ำหนักแบบ CAane Crane Crane Machine มีประโยชน์ในการโหลดและการปลดเครื่องมือ ซัพพลายเออร์อุปกรณ์

1. A variety of modes for meeting your diverse needs ,column ,hantilever crane can be optional ,and the vacuum suction pads we can offer the pneumatic control and DC / AC types .
2. Adopting German Becker large flow vacuum pump with extremely large flow and strong suction ,which is safe and reliable
3. The large capacity accumulator after the accidental power failure ,the workpiece can still remain in the sucker position for 5-30 minutes .
4. Vacuum leak alarm -ensure that the equipment works safely above the standard vacuum 
5. Adopting high strength wear resistance acrylonitrile-butadiene rubber with long quality warrenty for 18 monthes 
6. Sucker position can be adjsted to meet size changes of different plates .

 

The Details of Remcor Vacuum Suction Lifter 
 

How to choose suitable Vacuum lifter 
 

Vacuum Lifter is a very useful tool for loading the sheet, which is to improve the efficiency for the loading for the sheet, especially for the thin material.If without the vacuum lifter, normally it is not easy to load the sheet if take 0.5mm thickness stainless steel sheet, so here Vacuum lifter is very necessary.

But how to choose the suitable vacuum lifter, what factor we need to consider 

The points we need to consider 

• What is the size of the sheet? Take example, the most often size we use is 3000*1500mm,4000*2000mm 

• What is the weight of the sheet? Normally we take the calculation like this 

Weight:7.85*W*L*T,  W:Width, L: Length, T: Thickness

So take 6mm Carbon Steel 3015 for example 

The weight is 7.85*3*1.5*6=212kgs 

• Then we need to know your factory have the crane or not?

If no have the crane, we can also offer the cantilever crane(JIB CRANE)

• If customer have the crane, then we need to choose the vacuum suction pads 

Currently we have two types, One is Electric Type, one is Battery type 
 

If Electric type, we need to know the local industrical votlage and frequency, then we can choose the pump motor accordingly .
For the pump, what we choose is from Beker or Thomas, which is with good quality that can be used for long time.
And for the battery type, we choose Panosonic, normally one pcs can use 1-2 days, and the other one can charge which this one use.

• Also many customers would like to ask us, how many vacuum pads you will use and it is enough to suck the material and it is eequal to load the sheet?
   

  Yes, it is a really good question, normally we use pads 2 sizes, one is Diameters 300mm, one is diameters 230mm,diameters 300mm can load 200kgs/pcs, and Diameters 230mm can load 100kgs, if the weight is 1000kgs, so we need at least 5 pcs of the Diamters of 300mm, normally will use 6pcs,which is easily to distribute and load the sheet equally 
   

• Is it safe once the power off if we use the electric type?

  Safety is the most important issue we need to consider, especially in some developed countries, the cost for the vacuum lifter is not high, but the operator hurt, it is a lot of cost.So if this kind of problems can not make sure, it is also very difficult to be so popular in the market 

  So we have a pressure keeping device, once even the electricity is off, the vacuum lifter at least to use 15 minutes, it is enough time for the operator to release the sheet and wait for the electricity 

AC TYPE