ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 
Characteristics:
Classification:
Grade 1 can withstand the test temperature of no more than 100 ºC, code T1;
Grade 2 can withstand the test temperature of no more than 125 ºC, code T2;
Grade 3 can withstand the test temperature of no more than 150 ºC, code T3;
Grade 4 can withstand the test temperature of no more than 180 ºC, code T4;
Product Use:
Heat resistant conveyor belt is mainly used in metallurgy, cement, casting, electric power, building materials, chemical industry and other fields, mainly used to transport high temperature materials such as sinter, coke, steel castings, cement clinker, etc.
Product Features:
The strength material of our heat resistant belt is EP fabric of high modulus and low shrinkage. The cover compound consists of modified SBR or EPDM. These make the belt have good thermal stability, that can be used widely to carry hot materials with surface temperature of 100-220ºC in steel plants, cement, coke glass plants and other industries.
Standards Offered:
DIN22102, RMA, AS1332, SABS 1173/2000, IS 1891, BS490, JIS K 6322, etc.
Main Technical Parameters
Type |
Textile type |
Strength per ply Min.(N/mm) |
Plies of fabric | Cover thickness(mm) | Belt width (mm) |
Cover grade | |
| Top cover | Bottom cover | ||||||
EP belt |
EP-100 | 100 | 2-8 | 2-16 | 0-10 | 300-3400 | Abrasion resistant Impact resistant Heat resistant Oil resistant Acid/alkali resistant Fire resistant Etc. |
| EP-125 | 125 | ||||||
| EP-150 | 150 | ||||||
| EP-200 | 200 | ||||||
| EP-250 | 250 | ||||||
| EP-300 | 300 | ||||||
| EP-350 | 350 | ||||||
| EP-400 | 400 | ||||||
| EP-500 | 500 | ||||||
NN belt |
NN-100 | 100 | 2-10 | ||||
| NN-125 | 125 | ||||||
| NN-150 | 150 | ||||||
| NN-200 | 200 | ||||||
| NN-250 | 250 | ||||||
| NN-300 | 300 | ||||||
| NN-400 | 400 | ||||||
| NN-500 | 500 | ||||||
| CC belt | CC56 | 56 | 3-12 | ||||
Main technical indexes of GB / T 7984-2013
| Item | Type | ||||
| NN,EP,CC | |||||
| Adhesion strength | Between coating and belt cores | Thickness of coating layer>1.5mm ≥ N/mm |
3.5 | ||
| Thickness of coating layer 0.8~1.5mm More than N/mm |
3.2 | ||||
| Between layers ≥ N/mm | 4.5 | ||||
| Tensile strength value of full thickness belt / N / mm | 160 ~ 3150 | ||||
| Elongation of longitudinal reference force of full thickness belt / % ≤ | 4 | ||||
Coating performance |
H (sharp wear) |
D (high wear) |
L (moderate wear) |
||
| Breaking strength / MPa ≥ | 24 | 18 | 15 | ||
| Elongation at break / % ≥ | 450 | 400 | 350 | ||
| Abrasion / mm3 ≤ |
120 | 100 | 200 | ||
| Aging test(70ºC×168h) Median value of tensile strength and elongation |
It shall not be less than 75% of the corresponding value before aging. |
||||
Q1. Are you a manufacturer?
Yes, we have mainly produced rubber conveyor belts for over 18 years.
ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 
