ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว TS desktop constant temperature and humidity test box is used to test the performance of materials in various environments and test the heat resistance, cold resistance, dry resistance, and humidity resistance of various materials. It is suitable for testing the quality of products such as electronics, electrical appliances, communications, instruments, vehicles, plastic products, metals, food, chemicals, building materials, medical treatment, and aerospace.
Appearance: High-quality appearance, the body adopts a circular arc shape, the surface is treated with matte stripes, and the flat non-reactional handle is used, which is easy to operate, safe, and reliable.
Observation window: rectangular multi-layer glass viewing window, which can be used for observation of the test product in the test.
The window is equipped with a sweat-proof electric heater device to prevent condensation and water droplets, and a high-brightness PL fluorescent lamp maintains the lighting in the box.
Water supply system: With an external water supply system, it is convenient to supplement the water supply of the humidification barrel and automatically recycle it for use.
Compressor: The compressor cycle system adopts the French "Taikang" brand, which can effectively remove the lubricating oil between the condenser tube and the capillary tube and the whole series adopts environmentally friendly cold coal (R404, 507)
Control mode: adopt intelligent PID + SSR / SCR forward and inverse two-way synchronization output, containing advanced slope control logic.
Controller: It has multi-segment program editing and temperature and humidity can be controlled quickly (OUICK) or slope (SLOP).
System capacity: 150 groups of programs × 1500 segments can be logged in, the number of segments can be divided arbitrarily, and the programs can be connected to each other freely.
Cycle setting: 9999×999 cycles can be executed, and 5 groups of independent partial cycles can be cut out.
Time signal: 3 sets of timing control output interfaces, with 10 timing control modes, it is convenient to execute the timing planning of external drive components start/stop.
Safety inspection: 15 full-featured system inspections to ensure the safe operation of the machine. Failure time, items, and troubleshooting measures can be automatically displayed.
| Internal dimensions(W×H×D)cm | 50×50×60cm(WxDxH) |
| Outside size(W×H×D)cm | 75X134X156cm(WxDxH) |
| Volume(L) | 80L,150L,225L,408L,:800L |
| Heating rate | 3ºC/min |
| Cooling rate | 1ºC/min |
| Temperature range | -40ºC~150ºC |
| Temperature uniformity | ±0.5ºC |
| Humidity distribution uniformity | ±2% |
| Temperature stability | ±0.3ºC |
| Humidity stability | ±2%RH |
| Humidity range | 20%~98%RH (can be customized according to customer requirements: low humidity type can reach 5%RH) |
| Program control | Program control 120 groups of 1200 segment programming, 999 cycle settings, and multiple groups of PID control functions, with RS-232 computer, interface control. |
| Humidification system | Surface evaporative type, with additional protection against water shortage and power failure, and overheating. |
| Dehumidification system | Freezing latent heat dehumidification method |
| Cooling system | -20ºC above adopts a one-element fully enclosed air-cooled refrigeration system, below -40ºC adopts a dual-element fully enclosed air-cooled refrigeration system |
| Water supply system | Built-in pure water generator, tap water can be directly added without manual water addition, and a water shortage warning device is attached |
| Internal material | SUS#304 |
| External material | Advanced paint treatment of electrolytic board |
| Insulation material | Rock wool and rigid PU foam insulation |
| Safety devices | No fuse switch, compressor overload, high cooling coal, over-temperature, power failure, protection switch, temperature limit protection and fault alarm device |
| Temperature and humidity adjustment | Balanced temperature and humidity control method |
| Standard equipment | Automatic defogging glass window, two upper and lower adjustable compartments, test hole, operating room lamp, movable wheel |
| Optional equipment | Recorder |
| Power Supply | AC220V/380V±10%,50/60Hz |
Company Introduction:
PW (Guangdong) Instruments Co., Ltd. was established in March 2007, a national high-tech enterprise, located in Tongzheng Intelligent Industrial Park, No. 2, North 3rd Road, Tingshan Square, Houjie Town, Dongguan City, Guangdong Province. Through years of operation, the company has gathered a group of talents with considerable qualifications in the industry, and has accumulated a large number of high-quality customers. In order to better serve customers in East China, the company established PW Instruments (Shanghai) Co., Ltd. in Shanghai and set up an instrument exhibition hall and testing center in Suzhou Industrial Park.
Corporate Culture:
Vision: Become a world-renowned instrument manufacturer
Mission: Provide customers with high-quality testing equipment
Values: Customer satisfaction is our aim.
Q: Are your company a trading one or a factory?
A: Factory, More than 15 years focusing on test equipment field, 10 years exporting experience.
Q: After an order is placed, when to deliver?
A: Generally about 10-25 days, If we have inventory, we can arrange shipment within 3 days.
Please be aware that our production lead times depend on specific items and item quantities.
Q: What about the warranty with after-sales services?
A: The testing machine is guaranteed for 12 months by PW, we can help you to repair your problem controller freely, even it's not from our factory. After the warranty, the professional after-sale service team will provide perfect technical support and help guests solve problems encountered while using our product, handle guest problems and complaints in a professional and timely.
Q: What about the product's services and quality?
A: Each piece of equipment must be carried out 100% quality examination and test when shipping and delivering goods. Product use training, each of our products provides video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer's company when you need. products are widely recognized and trusted by users.
A: Considerate Service Different countries plugs, manually change the voltage from 110V to 220V, insurance indicator.
Q: Can your products be customized?
A: Yes, our product can be customized according to your parameters.
ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 
