ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว The temperature and humidity tester is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance. It is suitable for the industries of electron, electrical equipment, vehicle, metal, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
Appearance: high texture appearance, the body adopts circular arc shape, the surface is processed by fog stripe, and adopts plane non-reaction handle, easy to operate, safe and reliable.
Observation window: rectangular multi-layer glass viewing window, which can be used to observe the test products in the test. The window is equipped with an anti-sweat electric heater, which can be used for waterproof gas condensation water drops, and high brightness PL glister light to keep the lighting inside the box.
Water supply system: It is equipped with an external water supply system, which is convenient for supplementing the water supply in the humidifying drum and recycling automatically.
Compressor: The compressor circulation system adopts the French "Taikang" brand, which can effectively remove lubricating oil between condensing tube and capillary tube, and the whole series adopts environment-friendly cold coal (R404, 507).
Control mode: intelligent PID+SSR/SCR positive and negative two-way synchronous output, including advanced slope control logic.
Controller: with multi-segment program editing and temperature and humidity can do fast (OUICK) or slope (SLOP) control.
System capacity: 150 groups of programs ×1500 sections can be logged in, the number of sections can be divided arbitrarily, and the programs can be freely connected to each other.
Cycle setting: 9999×999 times cycles can be performed, and 5 separate cycles can be cut out.
Time signal: 3 sets of timing control output interfaces, with 10 timing control modes, to facilitate the execution of timing planning for the start/stop of external driver components.
Safety inspection: 15 items of full-function system detection to ensure safe operation of the machine. And can automatically display the time of failure, items, and elimination countermeasures.
|
Model |
TS-80-40M |
TS-150-40M |
TS-225-40M |
TS-408-40M |
TS-1000-40M |
|
Capacity |
80L |
150L |
225L |
408L |
1000L |
|
Interior size (cm)W*H*D |
40*50*40 |
50*60*50 |
50*75*60 |
60*85*80 |
100*100*100 |
|
Exterior size (cm)W*H*D |
93*131*81 |
100*155* 110 |
100*170* 120 |
110*180* 140 |
150*195* 165 |
|
Single maximum currently(A) |
8A |
10A |
13A |
14A |
24A |
|
Rated power(KW) |
3.5KW |
6KW |
7KW |
9KW |
13KW |
|
Weight(KG) |
260 |
310 |
320 |
400 |
700 |
|
Temperature range |
-40ºC~+150ºC |
||||
|
Temperature stability |
±0.5ºC |
||||
|
Temperature uniformity |
±2.0ºC |
||||
|
Humidity range |
20%~98%RH |
||||
|
Humidity stability |
±1.5% |
||||
|
Humidity deviation |
≤±5%RH when humidity is less than 75%RH; ≤±3%RH when the humidity is more than 75%RH |
||||
|
Heating up |
heat up from -40ºC to +150ºC,≤60mins |
||||
|
Cooling down |
cool down from +20ºC to -40ºC, ≤40mins |
||||
|
Ambient temperature |
ambient temperature condition for the chamber working:+5ºC~+35ºC |
||||
|
Exterior material |
1)stainless steel; 2)galvanized steel sheet bake finish |
||||
|
Interior material |
SUS304 stainless steel |
||||
|
Insulation technology |
outer rigid polyurethane foam inner glass fiber cotton |
||||
|
Refrigeration mode |
mechanical vapor compression refrigeration-single stage; cooling mode: air-cooling |
||||
|
Refrigeration compressor |
totally enclosed plunger compressor imported from France (low noise/environment protection) |
||||
|
Refrigerant |
environment protection R404A(DuPont) |
||||
|
Circulating fan |
high-temperature induction motor centrifugal wind wheel |
||||
|
Heater |
high-reliability stainless steel packaging finned heater/selectable: nickel-chrome alloy bare wire heater |
||||
Company Introduction:
PW (Guangdong) Instruments Co., Ltd. was established in March 2007, a national high-tech enterprise, located in Tongzheng Intelligent Industrial Park, No. 2, North 3rd Road, Tingshan Square, Houjie Town, Dongguan City, Guangdong Province. Through years of operation, the company has gathered a group of talents with considerable qualifications in the industry, and has accumulated a large number of high-quality customers. In order to better serve customers in East China, the company established PW Instruments (Shanghai) Co., Ltd. in Shanghai and set up an instrument exhibition hall and testing center in Suzhou Industrial Park.
Corporate Culture:
Vision: Become a world-renowned instrument manufacturer
Mission: Provide customers with high-quality testing equipment
Values: Customer satisfaction is our aim.
Q: Are your company a trading one or a factory?
A: Factory, More than 15 years focusing on test equipment field, 10 years exporting experience.
Q: After an order is placed, when to deliver?
A: Generally about 10-25 days, If we have inventory, we can arrange shipment within 3 days.
Please be aware that our production lead times depend on specific items and item quantities.
Q: What about the warranty with after-sales services?
A: The testing machine is guaranteed for 12 months by PW, we can help you to repair your problem controller freely, even it's not from our factory. After the warranty, the professional after-sale service team will provide perfect technical support and help guests solve problems encountered while using our product, handle guest problems and complaints in a professional and timely.
Q: What about the product's services and quality?
A: Each piece of equipment must be carried out 100% quality examination and test when shipping and delivering goods. Product use training, each of our products provides video training to show you how to install & operate. We can arrange engineer to train the operation of equipment to customer's company when you need. products are widely recognized and trusted by users.
A: Considerate Service Different countries plugs, manually change the voltage from 110V to 220V, insurance indicator.
Q: Can your products be customized?
A: Yes, our product can be customized according to your parameters.
ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 
