ข้อมูลพื้นฐาน
Media
Industrial Usage, Water Industrial Usage, Househol
Type
Regulation, Safety, Drain, Temperature Control, FL
Seal Surface
Wedge Gate Valve
Thread Position of Valve Rod
Outside Gate Valve
Usage
Regulation, Safety, Emptying, Drain, Temperature Control, Flow Control
Standard
CE, ISO. JIS. ANSI
Application
Industrial Usage, Water Industrial Usage, Household Usage
Working Pressure
Pn10/Pn16
Structural Form
Fixed Ball Valve
แพคเพจการขนส่ง
Plywood or Wooden Box
รหัสพิกัดศุลกากร
8481804090
คำอธิบายสินค้า
Product Description
The pipe thread standard is derived from the British Wyeth thread, which is the basic size to measure the pipe thread size. The radial diameter tolerance of Wyeth threads is usually converted to the axial tooth tolerance of inch sealing pipe threads by 1/16 taper relation. And 55 degrees pipe thread: mainly used for pipe connection, so that its internal and external thread with close, there are straight pipe and cone pipe two kinds. Common pipe threads include the following: NPT, PT, G, etc.
1. Inch pipe thread joint (55°) includes: general sealed pipe thread (R), unsealed pipe thread (G), Korea and Japan old Inch pipe thread (PT, PF).
Inch thread is marked with inch thread size, according to the shape of cylinder, cone two kinds; According to tooth type Angle, it can be divided into 55° and 60°. The 1/4, 1/2, and 1/8 marks in the thread indicate the diameter of the thread size in inches. An inch is eight minutes, a quarter of an inch is two minutes, and so on. |
DN | SIZE | A | B | C | D |
8 | 1/4" | 39 | 30 | 60 | 8 |
10 | 3/8" | 45 | 35 | 60 | 10 |
15 | 1/2" | 50.5 | 42 | 84.5 | 13.5 |
20 | 3/4" | 55.5 | 45.5 | 92 | 17 |
25 | 1" | 68 | 56.5 | 104 | 22.5 |
32 | 1 1/4" | 75 | 72.5 | 118 | 30 |
40 | 1 1/2" | 84.5 | 79.5 | 133 | 37 |
50 | 2" | 93 | 87 | 142 | 42 |
The thread standard has the following specifications
NPT, PT and G are pipe threads.
1.NPT Thread is the abbreviation of National (American) Pipe Thread, which is a standard 60 degree taper Pipe Thread used in North America. The national standard can be referred to GB/T12716-1991.
2.PT Thread is the abbreviation of Pipe Thread, is 55 degree sealed taper Pipe Thread, belongs to Wyeth Thread family, mostly used in Europe and Commonwealth countries, commonly used in water and gas Pipe industry, taper is 1:16. The national standard can be referred to GB/T7306-2000
3.G thread is 55 degree non thread sealing pipe thread, belongs to Wyeth thread family. The mark G stands for cylindrical thread. The national standard can be referred to GB/T7307-2001
In addition, the 1/4, 1/2 and 1/8 marks in the thread refer to the pipe diameter in inches. People in the industry usually refer to thread sizes as minutes: an inch equals eight minutes, a quarter of an inch equals two minutes, and so on.
G seems to be the general name of the pipe thread (Guan), 55,60 degrees of division belongs to the functional, commonly known as tube circle. That is, the thread is machined from a cylindrical surface.
ZG commonly known as pipe cone, that is, the thread is processed by a conical surface, general water pipe joints are such
Rc denotes tapered internal thread.
ZG for taper pipe threads, 3/4' for inch marks, that's 3/4 inch taper pipe threads, in the Hardware manual.
The current national standard of ZG 3/4 "thread diameter is 26.44 mm. Refer to manual of Metric, US and Inch Thread Standards (3rd edition).
It should be expressed as ZG 3/4 ". "(") is the symbol of inches.
An inch is equal to 8 English minutes. The origin of 3/4 is 6/8=3/4. Commonly known as 6 points.
Similarly, zG1/2 "thread diameter ≈21 mm. Commonly known as 4 points.
ZG1 "thread diameter ≈33 mm. Commonly known as 1 inch.
The inner diameter of ZG1 1/2 "thread tube is about 48 mm. Commonly known as 1 inch and a half.
Taper pipe thread is only used for hydraulic system connection; The pipe thread g3/4 "is used for water pipe connection only. Taper pipe threads are very similar to pipe threads except in taper. Note that the basic dimensions of pipe threads are different from those of ordinary threads. DN is the nominal diameter.
Packaging & Shipping
Company Profile
The company covers an area of about 15,000 square meters, more than 200 employees, 15 technical personnel, the company mainly produces water series of valves, butterfly valves, gate valves and check valves, as well as other customers orderedThis year, we passed the DNV and ABS certificates
FAQ
1.We have enough stock and can deliver in short all year round, because we are actually a manufacturer.
2.We are amenable to advice in choosing type of valve or others for customers.
3.Normally, OEM and ODM can be accepted.
4.We also offer designed drawing and technical supports.
5.Fast and quick response if you need any assistance.
ที่อยู่:
No. 29, No. 6 Road, Xiaozhan Industrial Park, Jinnan District, Tianjin, China
ประเภทของธุรกิจ:
ผู้ผลิต/โรงงานผลิต
ขอบเขตธุรกิจ:
อุปกรณ์และส่วนประกอบอุตสาหกรรม, เครื่องมือและฮาร์ดแวร์
การรับรองของระบบการจัดการ:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
แนะนำบริษัท:
บริษัทเทียนจินโอ TS Manufacturing Co., Ltd ก่อตั้งขึ้นในปี 2001 โดยผลิตวาล์วมานานกว่า 22 ปีโดยมุ่งเน้นธุรกิจการวิจัยและพัฒนาวาล์วสำหรับอุตสาหกรรมควบคุมของเหลว การผลิตของเราที่มีเครื่องทดสอบได้รับการรับรองตามมาตรฐาน ISO9001 และ CE ด้วยเครื่องบันทึกของ Lloyd เรากำหนดการควบคุมคุณภาพที่เข้มงวดที่สุดในทุกขั้นตอนการผลิตเพื่อความมั่นใจในการทำงานและความน่าเชื่อถือของผลิตภัณฑ์ ! บริษัทของเรานำเสนอผลิตภัณฑ์ที่หลากหลายซึ่งสามารถตอบสนองความต้องการแบบหลายด้านของคุณได้ เรายึดมั่นในหลักการบริหาร " คุณภาพต้องมาก่อนลูกค้าต้องมาก่อนและมีการให้เครดิต " นับตั้งแต่ก่อตั้งบริษัทและพยายามอย่างดีที่สุดเสมอเพื่อตอบสนองความต้องการที่อาจเกิดขึ้นของลูกค้าของเรา บริษัทของเรายินดีที่จะร่วมมือกับบริษัทต่างๆทั่วโลกอย่างจริงใจเพื่อสร้างสถานการณ์ที่เป็นหนึ่งในสองฝ่ายของเราเนื่องจากแนวโน้มของโลกาภิวัตน์ทางเศรษฐกิจได้พัฒนาขึ้นโดยมีอำนาจที่ไม่อาจต้านทานได้
โครงสร้างแบบผีเสื้อขนาดเล็กน้ำหนักเบามีเพียงไม่กี่ชิ้นเท่านั้น และเพียงแค่หมุน 90 ° ก็สามารถเปิดและปิดได้อย่างรวดเร็วและง่ายดายขณะที่วาล์วมีคุณสมบัติการควบคุมของเหลวที่ดี แผ่นจานของบัตเตอร์ฟลายจะถูกติดตั้งในทิศทางของเส้นผ่าศูนย์กลางท่อ ในช่องทรงกระบอกของตัวผีเสื้อดิสก์หมุนรอบแกนหมุนมุมการหมุนระหว่าง 0 ° ประมาณ 90 ° หมุนเป็น 90 ° วาล์วจะอยู่ในสถานะเปิดเต็มที่ เมื่อวาล์วแบบปีกผีเสื้อหน้าคู่อยู่ในตำแหน่งเปิดสุดความหนาของแผ่นผีเสื้อจะเป็นแรงต้านทานเพียงอย่างเดียวเมื่อตัวกลางไหลผ่านตัววาล์วดังนั้นแรงดันที่ลดลงจากวาล์วจึงมีน้อยมากจึงมีคุณสมบัติการควบคุมการไหลที่ดี บัตเตอร์ฟลายมีการซีลสองประเภทคือซีลสปริงและซีลโลหะ วาล์วซีลยางยืดแหวนซีลสามารถติดตั้งบนตัววาล์วหรือติดตั้งกับขอบโดยรอบของจานได้