หลอดไฟ LED 1.2 ม . 1600 LM เปลี่ยนหลอดไฟฟลูออเรสเซนต์ทั่วไป 40W (NCL-T8-120 ซม .)

1.2 m LED lamp 1600 lm, replace 40W traditional fluorescent lamp
Advantages:
LED fluorescent recyclable waste, no pollution, unlike ordinary fluorescent lamps contain mercury components, environmental pollution; No ultraviolet and infrared spectra, so there is no heat, no radiation, is typical of the green lighting;
Energy saving, long life, low power consumption.
LED fluorescent tubes, which can save energy up to 80 %, and its battery life 10 times longer than fluorescent lamps. It is almost maintenance-free. In continuous operation, the costs recoverable in about half of cases. LED fluorescent short response time, when power is almost instant light, light flicker, frequent switching and adapt to the high-frequency operation of the site;
Quiet, comfortable, no noise.
LED lamp driver with constant current power, long life, no noise, and the traditional fluorescent lamp is a high-voltage start, activate the fluorescent starter to start the noise and heat up when the ballast work and produce core noise, can be used in sophisticated electronic instrumentation and office buildings and other places.
Soft light, you can protect your eyes.
High light efficiency: LED fluorescent almost all concentrated in the visible light spectrum frequency, efficiency can reach 80 % -90 %. The luminous efficiency of visible light efficiency of incandescent, fluorescent lamps are using the AC drive, it will cause 100-120 strobe per second. LED fluorescent tube directly into a DC -AC converter, resulting in no flicker, protect your eyes from injury.
The unique power supply design ( patent protection ), solve the problem of no flicker, high conversion efficiency, lower power consumption at the same brightness;
6 voltage design: . AC160-260V/47-63Hz.
Through traditional fluorescent lamp ballasts ignite play high pressure, it can not be lit at a low voltage. Although LED fluorescent tubes, may at any voltage lights, the brightness can be dimmed.
7 cold light source, no UV, no heat radiation, no mercury green light source, which is harmful to the environment and health rugged aluminum enclosure, lighter weight, and better heat dissipation;
8 innovative designs, safety, ease of installation;
9 saving 50 % to 60%, a direct replacement for the existing traditional fluorescent T8; Life up to 35, 000 hours.
Basic parameters:
Size: 26 * 1200 mm
LED brand: Taiwan wafer chip SMD2835
LED Qty: 92PCS
Material: Aluminum alloy + PC cover
Milky cover Lumen Output:
1200 mm: 1450 ~ 1600 lm
Input Frequency: 50 ~ 60Hz
Viewing angle: 180 degrees
Base: G13
Power Factor: Full load> 0.85-0.95
CRI: > 80Ra
Color Temperature: 2800 ~ 6500K
Input voltage: AC100 ~ 240V
Operating temperature - 20 C - + 40 C
Humidity> 95%
Storage temperature-35C - 55C
Storage humidity> 95%
High luminous efficiency (85 to 95 lumens / watt).
IP Rating: IP40 (indoor use only)
Packaging:
1.2 m: 0.38/kg /PC, 25PCS/CTN, 13kg /CTN, 126X22X22 cm
Applications:
1, to replace the traditional indoor ceiling light / Fluorescent
2, College / University / Hospital
3, conference / meeting rooms, showrooms
4, commercial complex
5, factory / office
6, supermarket
7, residential / institutional buildings

Quality assurance:
Two-year warranty and assume bad light way freight, service and technical support.
CE, RoHS