เครื่องดัดผม (FX-2) 95

FX-95Technical Specification
Max hose ID: 2"4SP One time finish crimping & 200mm (L) 90 Degree(Right Angle) Elbow can go through smoothly
Crimping Force: 420 ton
Die Opening & Closing: +/- 40mm
Opening without Dies: 136mm
Motor: 4Kw
Voltage: 380V/50Hz-3pH~220V/50Hz-1pH, the combination of components can be changed as per the voltage customer requiried
Full Crimp Cycle: 10s
Accuracy: 0.02mm
Un-even: 0.1mm
Weight (w/o oil): 200kg
Die-sets Supplied: 15 19 23 27 31 36 41 47 53 58 67
Dimensions: 630X450X800 mm

***The machines' dies moving in diameter's deraction, instead of axial. So it can crimping hose quickly.

FX-95 Die Chart
Die No. Range(mm) Length(mm)
15 15-19 75
19 19-23 75
23 23-27 75
27 27-31 75
31 31-36 75
36 36-41 75
41 41-47 75
47 47-53 75
53 53-58 75
58 58-67 75
67 67-73 75

SDX-95\SDX-90Z\FX-95 Crimping Machines are lapplied with the latest structure in the world. Since they are patents filing, basically distinguished with other domestic manufactories on mechanical structure. Their advantages are listed as belows:
During the crimping procedure, the dies moving radially, instead of axially(Simplifying Discribing: Vertically moving, no moving from backward to front--The crimped fitting/assembly/furrles will not be looks like cone-shaped (Simplifying describing: One end is big another one is smaller).
It is more convenient to install the dies because the they can be slided into the T-Slots. The dies are very steadily fixing on the basement to avoid the embossment (stripes) after crimping looks uneven on width(narrow or wide).
The opening without die is 136mm--200mm(Length) 90Degree (Right Angle) Elbow can go through smoothly.
It can let the positioning of special items being handled easily at crimping.

Re DX-95,
Its Dies are moving radially & axially. The hose's fittings are easily loosed and the fittings on hose are one-end big, another one smaller.
The opening without die is smaller, no way to let 200mm(Length) 90degree (right angle) can not being through.
The die bases are supported by springs only, it leads the crimped hose easily be leaking.
Based on the A/M reasons, this style of machines has been out-of-date one, we have not recommended to our customers. Most of China Domestic crimping machines are copying our DX-95.
The price can be dropped sharply if we use bad material & unqualified components, and choose unsufficient machine assembling procedure to produce machine, the correspondent cost can be lower down actually. But the quality and working life of machine will have problem. Furthermore, the problems will be existed on the hose after crimping.