ข้อมูลพื้นฐาน
After-sales Service
1years
แพคเพจการขนส่ง
Strong Wooden Package
ข้อมูลจำเพาะ
ISO9001: 2008
รหัสพิกัดศุลกากร
8474201000
คำอธิบายสินค้า
Quotation for Coca3 Grinder/ Calcium Carbonate line YFM series Yifeng grinding mill is a new-type grinding mill developed by our company for decades, combining rolling, impacting and grinding to one. It is an ideal ultrafine ground calcium carbonate grinding mill for deeply processing non-metallic minerals which hardness less than Moh's 5, such as calcium carbonate, barite, talc, gypsum, calcite, limestone, calcium oxide, bentonite, dolomite etc. The finished particle size can reach 325-3000 mesh(3.5-50 microns)Technical Advantages
1) Product fineness can reach 325-3000 mesh in one set of machine by adjusting turning speed of the classifier wheel.
2) Compare to ball mill, air-flow mill and stirred mill, YFM mill is lower investment cost, but high output capacity.
3) Low maintenance cost and simple operation.
4) 4-7 days installation, 15-20 days running adoption, reliable, High performance.
5) No dust pollution during operation. Environment friendly sound level outside sound-proof room.
Parameters
Application
Calcium carbonate is widely used as an extender in paints and coating, it is also a popular filler in plastics. PVC cables can use calcium carbonate to improve mechanical properties and electrical properties. It also routinely used as a filler in rubbers. Calcium carbonate is added to a wide range of adhesives, sealants, and decorating fillers.
Part 1: Main unit (Grinding system)
Raw material is fed into grinding chamber via feed port of upper part, then be grinded between rollers and grinding rings into powders. Powders are blowed into upper part. Qualified particle goes into powder collecting system through classifier wheel, others fall and be grinded again.
Part 2: Deduster (Powder collecting system)
In reverse-pulse-jet baghouses, individual bags are supported by a metal cage, Dusty air enters from the bottom of the baghouse and flows from outside to inside the bags. Bags are cleaned by a short burst of compressed air injection. The powder falls into a storage hopper below. This collecting system works with the help of digital sequential timer (PLC) attached to the pulse valves.Part 3: Electric control or PLC system
Adapting domestic top level electric components/Or Siemens/or Schneider, after 20 years' testing. Our electric control or PLC system is very easy to operate, fully automatic operation, and one button stop, It also easily adjusts. Buyer only needs to adjust current and frequency with visible digitals to reach different particle size from 325-3000 mesh.Certifications
Our Service* 7*24 Inquiry and consulting support.
* Sample(Non-metallic Minerals) testing support.
* Pick up from Xiamen International airport, View our Factory and customer site.
After-Sales Service
* 12 months warranty after assembling.
* Free assembling, training, PLC adjustment.
* Lifetime engineers available to service machinery overseas.
Grinding mill production line |
| 1*40 HQ |
| 2*40 HQ |
| YFM318 | 3*40HQ |
| All metallic parts will be loaded into container naked, and all spare parts/tools/Electric control cabinet/PLC Cabinet will be packed into Non-fumigation wooden box before loading to keep them clean and integrated. |
Our CompanyYifeng has area of facility 60000 square meter, there are two production bases. the two bases are 10 km apart. one base is mainly producing ultra-fine mill, either base is producing vertical mill and raymond mill.number of employees is about 170.
ที่อยู่:
No. 5, Tieshan Private Development Zone, Longyan, Fujian, China
ประเภทของธุรกิจ:
ผู้ผลิต/โรงงานผลิต, บริษัทการค้า
ขอบเขตธุรกิจ:
เครื่องจักรการผลิตและแปรรูป, โลหการ แร่ และพลังงาน
การรับรองของระบบการจัดการ:
ISO 9001
แนะนำบริษัท:
Longยาน Yifeng มีความ 2002 เชี่ยวชาญในการผลิตเครื่องจักรบดละเอียดสูงมากเครื่องบดและการสึกหรอทนทานต่อการร่ายชิ้นส่วนที่มีฐานทดลองขนาดใหญ่ได้รับใบรับรอง ISO9001
