GS งานกัดปรับความเร็วสูงของโรเตอร์คู่

With china's gypsum building materials industry continues to develop, china's gypsum gypsum, phosphogypsum, citrate gypsum, fluoride gypsum, natural gypsum production and processing industry has developed rapidly.The development of the industry, the continuous improvement of product quality makes gypsum professional production equipment is also more and more attention by the manufacturer.As china's gypsum industry started late, therefore, high-performance gypsum production equipment research and development has not yet formed a professional, affecting the plaster processing industry labor productivity and economic benefits.In response to this situation, pingyi kaiyuan new building materials co., ltd.To use its own technical strength, the first to develop a "gs series of dual-rotor high-speed modified mill" to solve the gypsum industry for the construction of gypsum grinding, the grinding powder of the mill, the chemical gypsum calcined product grain size distribution curve is optimized, the dry bending strength can be increased by 25% -30%, become a new generation of construction plaster optimization and modification of special equipment.
The machine is my company in the digestion and absorption of domestic and foreign special technical experience of crushing equipment on the basis of experience, according to the gypsum powder production process and its characteristics, clever design, devote themselves from the development.Its technical data have been accurately calculated, the product through the user's continuous trial, experts on-site demonstration and through the well-known experts in the scientific identification, confirmed that the product is fully suitable for china's chemical building gypsum modification requirements, to fill the gypsum industry for gypsum grinding sexual technical gaps.

Construction and working principle:
It is mainly composed of relatively rotating discs, each rotor has a fixed on the wheel of the steel plate, each steel plate with two laps with special materials made of impact bars, rods by concentric Rounded on the steel plate, the other end of the rod is fixed by the steel ring to increase its strength, the two steel plate on each lap in the machine on the machine to distribute the material to effectively crush the material; each steel plate with fixed The rods above make up a rotor, each rotor mounted on its own shaft, in a cantilever support state. The two motors are driven by the respective pulley in two directions to rotate at high speed. The two rotors are closed by the shell, the upper part of the shell has a feed port; shell lining stainless steel plate, effectively prevent the rotor wear, corrosion and bonding.
Working principle and process: Gypsum powder from the feed into the two relatively rotating wheel center, the material first fell on the most in the circle of the cage, due to the high-speed rotation of the rotor, the centrifugal force to the material received a strong blow to the bar was crushed , And then under the action of centrifugal force was thrown to the next lap on the bar, the material was again by the layer of rods hit again crushed, but the material by the direction of the opposite. So go on until the material through the layers of rod so far, after several crushing and grinding, the required size after the discharge from the lower part.
GS series of double-rotor high-speed modified mill has the following characteristics: reasonable structure, compact assembly, high precision, good operating stability, good crushing effect, high production efficiency, good sealing, low environmental dust, easy to open the box, easy to clean up And maintenance, the lining of the box with stainless steel plate to improve the wear resistance of the box, extending the service life of the device.

Technical parameters of GS-8 series double rotor high speed modified mill:
Technical parameters of GS-20 series double rotor high speed modified mill:
Technical parameters of GS-35 series double rotor high speed modified mill:System dust collection to be equipped with a 2000m3 / h dust collector