มีการต่อลงน้ำที่ถูกต้องด้วยอัตรา 99 % โดยอัตโนมัติการเติมน้ำขวดแก้ว และการประกอบเครื่องผนึกสายการผลิตขวดแก้วของเครื่องผลิตขวด

• Finished Dosage Form: Liquid
• Precision: High Precision
• Certification: CE, GMP, ISO
• Voltage: 380V
• Computerized: Computerized
• Customized: Customized
• Condition: New
• Warranty: 1 Year
• After-sales Service: Field Installation, Commissioning and Training
• ความเร็วในการผลิต: 5000 บาทต่อชั่วโมง
• วัสดุ: สแตนเลสสตีล 304 /316L
• ประเภทกระบวนการ: การฆ่าเชื้อการอุดตันของตัวปิด
• มีขนาดที่เหมาะสม: 50 มล ., 100 มล ., 250 มล ., 500 มล ., 1000 มล
• อุตสาหกรรมที่เกี่ยวข้อง: โรงงานผลิตเภสัชกรรมและการแพทย์
• ความจุของเครื่องจักร: 4000bph-1200,000 bph
• แพคเพจการขนส่ง: Carton; Wooden Case; Wooden Package
• ข้อมูลจำเพาะ: 17800*6000*2300--24000*7000*2300 mm
• เครื่องหมายการค้า: IVEN
• ที่มา: China
• รหัสพิกัดศุลกากร: 8422303090
• กำลังการผลิต: Customized

คำอธิบายสินค้า

High Stoppering Qualified Rate 99% Automatic Glass Bottle Washing Filling and Sealing Assembly Machine Glass Bottle Production Line 

Glass bottle IV solution production line is mainly used for IV solution glass bottle of 50-500ml washing, depyrogenation, filling and stoppering, capping. It can be used for the production of glucose, antibiotic, amino acid, fat emulsion, nutrient solution and biological agents and other liquid etc.

Step 1

Washing machine:
This machine is used for the fine washing for infusion glass bottle, take turns to use the normal water, purified water, injection water, clean compressed air, fresh injection water and clean compressed air to washing the bottle in turns.
 

Step 1

Washing machine:
This machine is used for the fine washing for infusion glass bottle, take turns to use the normal water, purified water, injection water, clean compressed air, fresh injection water and clean compressed air to washing the bottle in turns.

Step 2

Depyrogenation Tunnel
Laminar flow sterilization tunnel used for washed vial's dry sterilization and remove heat, It can reach the highest temperature 300~350ºC, efficient sterilization time for 5-10 minutes.
It has three working area (Preheat area, heating area, cooling area).

Step 3

Filling, Vacuuming, Nitrogen Charging, Stoppering Machine
Filling part adopts valve filling, high precision in Germany.
Nitrogen charging immediately after filling, also nitrogen protection between the nitrogen charging and stoppering.

No bottles no filling, no bottles no vacuuming, no bottle no nitrogen charging, ensure the vacuum level in the air tank during vacuuming, meanwhile, make sure the oxygen residual after stoppering (control within 1.0%).

Step 4

Filling and Stoppering Machine
Aseptic liquid filling machine is very accurate and stable operation. The filling volume can be directly adjusted through HMI, here we have ORABS equipped with stainless steel laminar air flow hood.

Step 5

Capping Machine
It is mainly used for glass bottles capping. Continuous operation. Picking up and crimping, at the same time rolling the cap. After the completion, the cap have the same size and edge smooth, good appearance. High-speed, low damaged.

 

Advantages:

1.Separate pipeline for cleaning medium, no cross-contamination, according to GMP requirements.
2.Filling head synchronously tracks filling, high filling accuracy.
3.Adopt full servo drive system, no mechanical transmission.
4.Nitrogen charging function can be configured (before filling, during filling, after filling).
5.Quick changeover time for different bottle size.

Technical Specifications:

Filling, Nitrogen Charging, Stoppering Machine

ABOUT US