เสียบปลั๊กไฟเครื่องทดสอบฮีหม้อในตัว

Product explanation:
HD-602A plug integrated testing machine, is use to test power plug line conduction, polarity, insulation, compression, leakage current five items. This equipment adopts the programmable control system and human-machine interface. Feathers all round, high accuracy, easy to use, long service life. Qualified products will be pushed out with a mark to prevent undetected or unqualified product mixed. Save cost and improve production efficiency.

Technical parameter:
High volt test KV output voltage 0-5KV MAX5mA
HV output voltage 0-5KV MAX10mA
Rated power 500VA
Waveform 50/60Hz Exchange sine wave
Voltage calibration +/-5% within
High volt indicator proportion 1: 25
Precision +/-3%
Failure judgment judgment *Measured values over basic value.
*Cut off the output voltage, give a failure signal.
HV current leakage fixed value 0.5\1\2\3\5\10mA
KV current leakage fixed value 0.5\1\1.5\2\5mA
Judgment accuracy +/-5% to setting
Insulation resistance Output voltage 500VDC
Voltage calibration +/-5%
Reference value set 5/50/100MΩ
Judgment Test resistance below reference value, give failure signal.
Judgment accuracy +/-5%
Instructions header(0-200 MΩ ) +/-5%
Measurement range 0-200 MΩ
Input voltage 220VAC+/-10%
NOTICE:
1, Inner high-volt is applied between L, N, E wires, and the outer high-volt is applied between L, N, E wires and jacket.
2, both 3-wire and 2-wire power plug can be tested by this machine.

Test Objects: Power Plugs