ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว ISO9809-3 150bar 37MN TUV TPED Oxygen Tanks Gas Cylinders
1,0.8 litres to 80 litres; 89mm-267mm cylinder outer diameter; Working pressure is 150bar; Hydrostatic test pressure is 250bar; 37 mn material; Iso9809-3 or GB/T5099.3 production standards;
2,The minimum design wall thickness of gas cylinders is 2.4mm-6.2mm; The cylinder body weight is 1.60kg-72.4kg; The height of the cylinder body is 197mm-1520mm; Cylinder mouth threads include PZ19.2,PZ27.8,PZ39; 25E; 3/4-14 NGT, etc.; Maximum gas storage is 0.12m3-12m3 (150L-12000L)
3,Aliases: Oxygen gas cylinders; Germany Rhein gas cylinder; 150 bar cylinder; Oxygen bomb; Gas cylinders.
4,A cylinder shall be considered to be of a new design, compared with an existing approved design, when at least one of the following applies:
a) the nominal outside diameter has been changed;
b) the guaranteed minimum thickness has been changed;
c) the hydraulic test pressure, ph, has been increased (where a cylinder is to be used for lower pressure duty than that for which design approval has been given, it shall not be deemed to be a new design);
d) the guaranteed minimum yield strength, Reg and/or the guaranteed minimum tensile strength, Rmg, have changed.
5,Test conditions :As the cylinder and test equipment are being filled with water, care shall be taken to ensure that no air is
trapped in the circuit by operating the hydraulic pump until water is discharged from the vent or air-release valve.
During the test, pressurization shall be carried out in two successive stages.
a) In the first stage, the pressure shall be increased at a rate of not more than 5 bar/s up to a pressure value corresponding to the initiation of plastic deformation;
b) In the second stage, the pump discharge rate shall be maintained at as constant a level as possible until the cylinder bursts.
Shandong Hongsheng Pressure Vessel Co., Ltd. is willing to be your long-term partner and chief cylinder safety officer, and jointly escort your cylinder safety.
| Type | Outside Diameter (mm) |
Water Capacity (L) |
Bottle Height (mm) |
Weight (kg) |
Working pressure (Bar) |
Design wall thickness (mm) |
Material Grades |
| WM 89-0.8-150 | 89 | 0.8 | 197 | 1.60 | 150 | 2.4 | 37MN |
| WM 89-1-150 | 89 | 1 | 240 | 1.83 | 150 | 2.4 | 37MN |
| WM 89-1.2-150 | 89 | 1.2 | 275 | 2.07 | 150 | 2.4 | 37MN |
| WM 89-1.4-150 | 89 | 1.4 | 310 | 2.30 | 150 | 2.4 | 37MN |
| WM 89-2-150 | 89 | 2 | 419 | 3.00 | 150 | 2.4 | 37MN |
| WM 108-1.4-150 | 108 | 1.4 | 233 | 2.81 | 150 | 2.9 | 37MN |
| WM 108-1.8-150 | 108 | 1.8 | 284 | 3.4 | 150 | 2.9 | 37MN |
| WM 108-2.0-150 | 108 | 2 | 310 | 3.62 | 150 | 2.9 | 37MN |
| WM 108-2.5-150 | 108 | 2.5 | 374 | 4.29 | 150 | 2.9 | 37MN |
| WM 108-3.0-150 | 108 | 3 | 440 | 4.96 | 150 | 2.9 | 37MN |
| WM 108-3.2-150 | 108 | 3.2 | 464 | 5.24 | 150 | 2.9 | 37MN |
| WM 108-3.5-150 | 108 | 3.5 | 503 | 5.8 | 150 | 2.9 | 37MN |
| WM 108-4.0-150 | 108 | 4 | 568 | 6.30 | 150 | 2.9 | 37MN |
| WM 108-4.5-150 | 108 | 4.5 | 630 | 6.90 | 150 | 2.9 | 37MN |
| WM 108-5.0-150 | 108 | 5 | 696 | 7.64 | 150 | 2.9 | 37MN |
| WM 140-3.4-150 | 140 | 3.4 | 324 | 5.3 | 150 | 3.8 | 37MN |
| WM 140-4.0-150 | 140 | 4 | 375 | 5.89 | 150 | 3.8 | 37MN |
| WM 140-5.0-150 | 140 | 5 | 447 | 6.96 | 150 | 3.8 | 37MN |
| WM 140-6.0-150 | 140 | 6 | 516 | 7.56 | 150 | 3.8 | 37MN |
| WM 140-6.3-150 | 140 | 6.3 | 540 | 7.88 | 150 | 3.8 | 37MN |
| WM 140-6.7-150 | 140 | 6.7 | 569 | 8.30 | 150 | 3.8 | 37MN |
| WM 140-7.0-150 | 140 | 7 | 591 | 8.63 | 150 | 3.8 | 37MN |
| WM 140-8.0-150 | 140 | 8 | 665 | 9.68 | 150 | 3.8 | 37MN |
| WM 140-9.0-150 | 140 | 9 | 744 | 10.7 | 150 | 3.8 | 37MN |
| WM 140-9.1-150 | 140 | 9.1 | 751 | 10.9 | 150 | 3.8 | 37MN |
| WM 140-10-150 | 140 | 10 | 818 | 11.9 | 150 | 3.8 | 37MN |
| WM 140-11-150 | 140 | 11 | 892 | 12.9 | 150 | 3.8 | 37MN |
| WM 140-12-150 | 140 | 12 | 966 | 14.3 | 150 | 3.8 | 37MN |
| WM 140-13.4-150 | 140 | 13.4 | 1069 | 15.5 | 150 | 3.8 | 37MN |
| WM 140-14-150 | 140 | 14 | 1112 | 16.4 | 150 | 3.8 | 37MN |
| WM 140-15-150 | 140 | 15 | 1188 | 17.5 | 150 | 3.8 | 37MN |
| WM 159-8.0-150 | 159 | 8 | 548 | 9.11 | 150 | 4.3 | 37Mn |
| WM 159-9.4-150 | 159 | 9.4 | 627 | 10.8 | 150 | 4.3 | 37MN |
| WM 159-10.0-150 | 159 | 10 | 660 | 10.9 | 150 | 4.3 | 37MN |
| WM 159-11.0-150 | 159 | 11 | 716 | 11.8 | 150 | 4.3 | 37MN |
| WM 159-12.0-150 | 159 | 12 | 780 | 13.1 | 150 | 4.3 | 37MN |
| WM 159-13.4-150 | 159 | 13.4 | 861 | 15.4 | 150 | 4.3 | 37MN |
| WM 159-15.0-150 | 159 | 15 | 932 | 16.8 | 150 | 4.3 | 37MN |
| WM 180-8.0-150 | 180 | 8 | 467 | 13.5 | 150 | 4.9 | 37MN |
| WM 180-10-150 | 159 | 10 | 571 | 15.4 | 150 | 4.9 | 37MN |
| WM 180-13.4-150 | 159 | 13.4 | 721 | 18.6 | 150 | 4.9 | 37MN |
| WM 180-15-150 | 159 | 15 | 792 | 20.2 | 150 | 4.9 | 37MN |
| WM 180-18-150 | 159 | 18 | 924 | 23.1 | 150 | 4.9 | 37MN |
| WM 180-20-150 | 159 | 20 | 1012 | 24.8 | 150 | 4.9 | 37MN |
| ISO 219-40-150 | 219 | 40 | 1310 | 47.8 | 150 | 5.7 | 37MN |
| ISO 232-40-150 | 232 | 40 | 1167 | 43.0 | 150 | 5.3 | 37MN |
| ISO 232-46.7-150 | 232 | 46.7 | 1345 | 48.9 | 150 | 5.3 | 37MN |
| ISO 232-47-150 | 232 | 47 | 1351 | 49.0 | 150 | 5.3 | 37MN |
| ISO 232-50-150 | 232 | 50 | 1430 | 50.0 | 150 | 5.3 | 37MN |
| ISO 267-60-150 | 267 | 60 | 1330 | 66.7 | 150 | 5.8 | 37MN |
| ISO 267-68-150 | 267 | 68 | 1490 | 73.9 | 150 | 5.8 | 37MN |
| ISO 267-70-150 | 267 | 70 | 1530 | 75.7 | 150 | 5.8 | 37MN |
| ISO 267-80-150 | 267 | 80 | 1730 | 84.7 | 150 | 5.8 | 37MN |
| Mark | C | Si | Mn | P | S | S+P | Cr | Mo | V | Ni | Cu |
| 37Mn | 0.34~0.40 | 0.10~0.30 | 1.35~1.75 | ≤0.015 | ≤0.010 | ≤0.020 | ≤0.30 | - | - | ≤0.30 | ≤0.20 |
| 34CrMo4 | 0.30~0.37 | ≤0.40 | 0.60~0.90 | ≤0.015 | ≤0.010 | ≤0.020 | 1.9~1.2 | 0.15~0.3 | - | ≤0.30 | ≤0.20 |
1. Who are we?
We are based in Shangdong, China, sell to Eastern Asia(12.00%),South America(11.00%),Southeast Asia(10.00%),Africa(10.00%),Mid East(10.00%),Northern Europe(10.00%),South Asia(10.00%),Eastern Europe(6.00%),Western Europe(6.00%),North America(5.00%),Central America(3.00%),Southern Europe(3.00%),Oceania(2.00%),Domestic Market(2.00%).
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
GAS CYLINDER,HIGH PRESSURE GAS CYLINDER,DISPOSABLE GAS CYLINDER,FIRE EXTINGUISHER,VALVE
4. Why should you buy from us not from other suppliers?
We will provide more quality products and services,better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,FCA,CPT;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,Credit Card,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 
