• PTFE Rotary Shaft Seals for Valve and Pump
  • PTFE Rotary Shaft Seals for Valve and Pump
  • PTFE Rotary Shaft Seals for Valve and Pump
  • PTFE Rotary Shaft Seals for Valve and Pump
  • PTFE Rotary Shaft Seals for Valve and Pump
  • PTFE Rotary Shaft Seals for Valve and Pump

PTFE Rotary Shaft Seals for Valve and Pump

Type: Shaft Seal
Material: PTFE
Combination Washer Packaging: All Inclusive
Spring Washer Type: Standard
ความหนาแน่น: 2.32 g/cm3
ช่วงอุณหภูมิ: -19~260 น

ติดต่อซัพพลายเออร์

ผู้ผลิต/โรงงานผลิต
สมาชิกระดับโกลด์ อัตราจาก 2013

ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ

หูหนาน, จีน
เพื่อดูป้ายกำกับความแข็งแกร่งที่ได้รับการยืนยันทั้งหมด (30)

ข้อมูลพื้นฐาน

ไม่ใช่ ของรุ่น
PTFE
หั่นเป็นชิ้นยาว
52
มอดุลัสของความยืดหยุ่น
0.35 ~ 0.5gpa
การยืดตัวณจุดขาด
150~350
แพคเพจการขนส่ง
Export Carton, Pallet
ข้อมูลจำเพาะ
full specification
เครื่องหมายการค้า
hdgfz
ที่มา
China
รหัสพิกัดศุลกากร
3926909090
กำลังการผลิต
Big&Stable

คำอธิบายสินค้า

Product name
PTFE rotary shaft seals for valve and pump
 

The superior dielectric properties especially at high radar and microwave frequencies makes PTFE widely use as an insulation material. PTFE is also works in a wide temperature from -180°C to +260°C.

PTFE is capable of much higher temperatures than many other materials.It is classed as a high performance substitute over weaker and lower melting point polyethylene.

 
PTFE Rotary Shaft Seals for Valve and Pump

PTFE Rotary Shaft Seals for Valve and Pump

PTFE Rotary Shaft Seals for Valve and Pump
PTFE Rotary Shaft Seals for Valve and Pump
PTFE Rotary Shaft Seals for Valve and Pump


Main properties 

. Excellent corrosion resistance
. Good electrical insulation performance
. High temperaturer resistance
. low coefficient of friction
. Good non-sticky properties


Application

PTFE is widely used in chemical anti-corrosion, mechanical seal,engineering piping, electrical insulation,pump&valve
fluid,aviation,textile,ceramic and other industries

PTFE Rotary Shaft Seals for Valve and Pump

Technical specification
Property NORM VALUE
Density  ISO1183 2.14-2.2
Tensile strength at break ( Mpa) ISO527 18-30
Modulus of elasticity (Gpa) ISO527 0.35-0.5
Elongation at break ISO527 150-350
Shore D DUROMETER 52
Temperature range / -196-260
 Coefficient of linear thermal expansion ISO11359 1


Products available:
  
PTFE Moulded Sheet (mm)
L W T
1000 1000 3-80
1000 2000 6-60
1200 1200 3-80
1500 1500 4-80
1800 1800 4-20
PTFE Skived Sheet (mm)
L W Package
1000 0.1-6 Packed by rolls or cut to sheets as per requirements
1200 0.25-6
1500 0.5-6
2000 0.5-6




Company introduction:

Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.
The productssell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry
semiconductor, gas&oil, pump&valve, water treatment...


PTFE Rotary Shaft Seals for Valve and Pump
Factory key equipment:
 PTFE Rotary Shaft Seals for Valve and Pump


 

ส่งข้อซักถามของคุณไปยังผู้ให้บริการนี้โดยตรง

*ของ:
*ถึง:
*ข้อความ:

โปรดป้อนตัวอักษรระหว่าง 20 ถึง 4000 ตัว

นี้ไม่ใช่สิ่งที่คุณตามหา? โพสต์คำขอการจัดซื้อตอนนี้

สิ่งที่คุณอาจจะชอบ

ติดต่อซัพพลายเออร์

สมาชิกระดับโกลด์ อัตราจาก 2013

ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ

ผู้ผลิต/โรงงานผลิต
ทุนจดทะเบียน
34646500 RMB
พื้นที่โรงงาน
50000 ตารางเมตร