ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว LDP electric single-girder crane is a small-size low headroom crane. The electric hoist is at one side of the girder, which increases the workspace.
It is applicable to the places where the workshop's headroom is low.
The crane is composed of a box-shaped girder weld by steel plates, an end girder, crab frame, and a fixed electric block. The crab is partially hung and runs at one side of the g rider. The electric hoist is raised to the upside of the girder from under the girder, which effectively increases the lifting altitude.
The crab is braked by a conical motor and driven by exposed gear.
The girder, of box-shaped structure and bias rails, has horizontal wheels at the upper and the lower, so that it is safe and reliable and can avoid rail gnawing.
The trolley adopts a separate drive, conical motor brake and exposed gear drive. The traveling motor can be a soft start motor and variable-frequency adjustable-speed motor according to user requirements. The crane can start steadily and runs safely and reliably.
It has three operation modes: ground handle, wireless remote control and cab. The cab has two types, open cab and closed cab. The span of it is 7.5-22 5m(subject to non-standard design according to user s requirements). The classification group is A3 and the operating ambient temperature is-25ºC~40ºC.
1).Light structure,easy installation and maintenance;
2). Reasonable structure,strong bearing capacity ;
3). Low noise, soft starting and stopping ;
4). Safe and reliable operation ;
5). Low cost maintenance, long working life;
6). Strong box type,welding by machine hand.;
7). Wheels,wirerope drum,gears, couplings are processed by CNC manchine center, TOP quality control;
8). Heavy duty slipring motor,Or Sq.cage motor with VVVF, IP54 or IP44,insulation class F or H,soft starting and smooth running
| LDP single girder overhead crane | |||||||
| Lifting capacity | 1 ton | 2 ton | 3 ton | 5 ton | 10 ton | 16 ton | 20 ton |
| Span | 7m-31.5m | ||||||
| Lifting height | 6/9/12/18/24/30m | ||||||
| Lifting motor | ZD122-4/1.5KW | ZD131-4/3.0KW | ZD132-4/4.5KW | ZD141-4/7.5KW | ZD151-4/13KW | ZD151-4/13KW | ZD152-4/18.5KW |
| Cross motor | ZDY111-4/0.2KW | ZDY111-4/0.4KW | ZDY112-4/0.4KW | ZDY121-4/0.8KW | ZDY121-4/0.8x2KW | ZDY121-4/0.8x2kw |
ZDY121-4 /0.8x4kw |
| Lifting speed |
0.8/8 m/min |
0.8/8 m/min |
0.8/8 m/min |
0.8/8 m/min |
0.7/7 m/min |
0.35/3.5 m/min |
0.4/4 m/min |
| Cross speed |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
| Traveling speed |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
20 m/min |
| Power source | 380V 50Hz,3Phase or customized | ||||||
| Working class | A3 | ||||||
1). What's the information should I provide when inquiry?
More details or drawings, better.
A: Lift capacity B: span C: lift height D: power sourceor other specials you give us will be more appreciated.
2). How many operating methods for my selection?
Standard operating methods:
A: pendent controller with push buttons .B: remote control with push buttons C: cabin(space capsule seat) control with joystick. Choose any type as you like.
3). Can this type work in hazardous environment?
Sure! We can customize for you, acid proof or explosion proof, no problem for that.
4). Can you provide the serious lifting tools?
Sure, we can provide any lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement!
5). How can we install the crane?
Our senior engineer can be your side to do the installation guide service and training. Moreover, our best sales can visit your country.
6). Safety device Overload limiter, Limit Switch (lifting and traveling), Interlock protection device.
ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 
