"Great" Tkzw/Tkzr-150 Combined Type Compressed Air Dryer

• After-sales Service: Technical Support on Site
• Warranty: 12~24month
• โฟลว์: ครอสโฟลว์
• สถานะวัสดุ: ผงแป้ง
• สื่อสำหรับทำให้แห้ง: อากาศ
• โครงสร้าง: แนบมาด้วย
• ไม่ใช่ ของรุ่น: TKZW/TKZR-150
• แรงดันใช้งาน: 0.6~1.0 MPa
• อุณหภูมิขาเข้า: ≤45ºC
• วิธีทำความเย็น: การระบายความร้อนด้วยน้ำ
• พิมพ์: Pressure Spray
• อัตราการไหลของอากาศ ( ø nm³ / นาที ): 160 μ nm³ นาที
• p.dp.p: จุดศูนย์กระจายแรงดัน -40 º C (0.7ma)
• วัสดุดูดซับน้ำมัน: สั่งงานอะลูมิเนียมออกไซด์แล้ว
• น้ำหนัก ( กก .): 8700
• เสียงรบกวน: ปิดเสียง / เงียบ
• สี: สีน้ำเงิน / สีเทา / สีดำ / สีขาว / สีแดง / ปรับแต่ง
• การรับรอง: CE และ ISO9001
• ผลิตภัณฑ์: เครื่องเป่าลมแบบผสม
• โหมดการทำงาน: การใช้งานแบบสลับขั้วสองตัว
• โหมดควบคุม: ตัวควบคุม PLC/ ตัวควบคุม SCM
• วิธีการปรับสภาพ: การปรับสภาพโดยไม่ต้องใช้ความร้อน ( การปรับสภาพความร้อน
• ขนาดของฝุ่นที่อยู่ในอากาศสุดท้าย: ≤0.01μm
• น้ำยาทำความเย็น: r22
• แพคเพจการขนส่ง: Standard Export Wooden Packing
• ข้อมูลจำเพาะ: 3300× 3540× 3340mm
• เครื่องหมายการค้า: GREAT
• ที่มา: Tianjin, China
• รหัสพิกัดศุลกากร: 8414809090
• กำลังการผลิต: 200 Pieces/Month

คำอธิบายสินค้า

The GREAT Combined Type Compressed Air Dryer there are different models to choose from: the rated air flow rate from 3.6Nm³/min to 160Nm³/min, We can also customize according to your needs. This device is used to remove moisture from compressed air.

A. The Picture for Combined Type Compressed Air Dryer:
B. Products Introductions & Advantages for Combined Type Compressed Air Dryer:
Compressed air dryer has two types, one is refrigerated type and the other is a desiccant type.  The air dryers advantages is less air and energy were consumed; But the temperature of dew point is limited.  The desiccant dryers advantages is dew point is very low.  But much air and energy were consumed is its shortcoming.  This Low Dew Point Compressed Air Dryer that Tianjin GREAT Air Compressor Co., Ltd designed is use all strong point of the above two types.  We bring into play their strong point by reasonable pipe connection and capability arrangement.  So the low dew point(-70ºC~-40ºC) air is the best economy and high quality production. Its strong point are high pure air and little consume air when it regenerate. Its status can not substitute in compressed air decontaminated area.

The Work Principle:
1. First, the high temperature and humid compressed air will exchange heat with low temperature compressed air which has been dried already, then the air would been cooled in the evaporator again, Most of vapors would been coagulated and drained. 
2. Next is dried compressed air will go to desiccant barrels for future dry and  dehumidifier, the lower dew point production would been produced. 
3. At last, the low temperature desiccant compressed air go to heat ex-changer, then can cool the high temperature and humid compressed air of inlet.
4. Meanwhile, the finished air's temperature is higher than before, and prevent the transportation pipe to freeze.
5. And a little of the desiccant air use to regeneration of adsorbent, the regeneration efficiency is better than before and reduce energy consumption.

Advantages of Combined Type Compressed Air Dryer:
1. Combined with the advantages of refrigeration type compressed air dryer and regeneration adsorption type compressed air dryer, No air loss, low energy consumption and low dew value. 
2. Adopt scientific and reasonable pipe connection structure and capacity arrangement, ensure of economic operation performance and high quality final air. 
3. Production high pure air, low consumption of the regeneration air, is the best choice for compressed air dry field. 
4. Air intake temperature under 45ºC. 
5. Controlling method microcomputer.

C. The Technical Parameters of Combined Type Compressed Air Dryer:

Model	TKZW(R)-3	TKZW(R)-6	TKZW(R)-8	TKZW(R)-10	TKZW(R)-15	TKZW(R)-20	TKZW(R)-30	TKZW(R)-40	TKZW(R)-50	TKZW(R)-60	TKZW(R)-80	TKZW(R)-100	TKZW(R)-150
Rated air flow rate (Nm³/min )	3.6	6.9	8.5	11	17	22	32	42	55	65	85	110	160
Working pressure (MPa)	0.6~1.0
Air inlet temperature	≤45ºC
Refrigerant	R22
Refrigeration compressor power (HP)	0.75	1.57	1.65	1.94	2.94	3.75	5.88	7.35	8.82	15	20	25	40
Heater power(KW)	2	3	3	6	7	9	12	15	16	27	36	42	64
Cooling mode	Air Cooling	Air Cooling/Water Cooling					Water Cooling
Desiccant	Activated aluminum oxide
Regeneration method	Heatless regeneration/Heat regeneration
Controlling mode	Independent control/On-line control
Consumption of regenerated air	2%~5%
Final air dryness(P.D.P)	-40ºC(0.7Mpa)
Size of dust particle contained in final air	≤0.01μm
Power voltage	1ph 220V 50HZ				3ph 380V 50HZ
Pipe diameter of air outlet/inlet	G1	G1-1/2	G1-1/2	G2	DN65	DN65	DN80	DN100	DN100	DN125/DN100	DN150/DN125	DN150	DN200
Installation	Flat floor, no footing mounting
Overall dimensions L*W*H (mm)	850×1100×2000	1100×1300×1900	1100×1300×1900	1300×1400×2150	1500×1480×2400	1500×1580×2400	1750×1600×2400 1750×1700×2300	1950×1900×2450	2200×2100×2450	2200×2250×2500	2500×2400×3200	2900×2600×3200 2900×2600×3000	3300×3550×3340 3300×2800×3340
Weight(KG)	380	500	710	1100	1300	1800	2200	2900	3200	3500	4300	5900	8700

D. Applications:    

E. Certification:    

F. Packing:    

G. Company Profile:

H. Our Service:
1. After-sale Service
    1). Any questions or requests before, during or after sales, we would like to help you any time and will find you the best solution in 24 hours.
    2). Warranty: One year for the whole machine two year for air end , and spare parts will be provided with best price.
    3). Over board engineer service is available.

2. Special Customized Service
    1) Full OEM
      • Quantity: at least 5 pcs
      • In this plan, we will do all the changes (Color, name plate and logo) as your need, and will not charge extra fee.
    2) Half OEM
      • Quantity: no limit
      • Under this program, we can make the necessary alteration (name plate and logo) but we will charge some extra fee for the name plate, as the name plate factory has the MOQ.
    3) Logo OEM
      • Quantity: no limit
      • Only the logo will be changed to yours, and no extra fee will be charged.

3. Overseas Engineer Service
    We are available to send our engineer for aboard service. Only need you to arrange the accommodation, transportation and translator. Extra cost for each will be discussed based on local price level.

I. FAQ:
Q1: Are you factory or trade company?
A1: We are factory. And we have ourselves trading company. 

Q2: What the exactly address of your factory?
A2: Our company is located in the West of the cross of Yijing road and Siwei road, Dongli Economic Development Area, Tianjin, 300300, China

Q3: How about the warranty terms of your machine?
A3: One year for the whole machine and two years for screw air end, and technical support according to your needs.
 
Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.
 
Q5: What about product package?
A5: We will pack the products strictly with standard wooden carton.
 
Q6: Can you customized the voltage of products?
A6: Yes, the voltage can be customized according to your requirement.

Q7: How long will you take to arrange production?
A7: 380V 50HZ we can delivery the goods within 7-15 days. Other electricity or other color we will delivery within 15-20 days.
 
Q8: Which payment term can you accept?
A8: T/T or L/C.
 
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, CPT, etc.

Q10: Can you use our brand?
A10: Yes, with professional design team, the OEM orders are highly welcome.