ข้อมูลพื้นฐาน
สื่อ
High Abrasive and High Corrosive Applications
วัสดุ
Carbon Steel+Ceramics
ฟอร์มการเชื่อมต่อ
หน้าแปลน
แรงดันที่กำหนด
Pn10/16, Cl150, JIS 10K
ช่อง
Round Port, Reduced Bore
มาตรฐาน
ASME, JIS, DIN, En, GB, GOST
แอปพลิเคชัน
การใช้งานในอุตสาหกรรม
Face-to-Face
ASME B16.10/En558:2008
แพคเพจการขนส่ง
Wooden Box
ข้อมูลจำเพาะ
DN15-DN100(1/2"-4")
รหัสพิกัดศุลกากร
8481804090
คำอธิบายสินค้า
Floating Type Ceramic Ball Valve is used in high corrosive and high abrasive applications, such as lime slurry, fly ash pneumatic conveying system, PCI coal powder injection in steel plant.Specification:Type: Bare Stem Floating Type Ceramic Ball Valves-Bare Stem and Round PortSize: DN15-DN100 (1/2"-4")Pressure Rating: PN10, PN16, CL150, JIS10KBody Material: Carbon steel ASTM A105Trim Material: ZrO2 Ceramics, 99%Al2O3 CeramicsEnd Connection: Flange, ASME B16.5, EN1092-1, JIS B2220Typical Applications:In many corrosive or/and abrasive applications, PTFE or PFA lined ball valves and metal seated ball valves are used, but limited to the material, these PTFE or PFA lined ball valves and metal seated valves cannot last for a long time due to severe abrasion and corrosion. Floating Ceramic ball valve have excellent performance and much longer life time than soft seated and metal seated ball valves in most corrosive and abrasive applications. Some typical applications listed below (but not limited to these applications) where FOYO Floating Ceramic ball valve have been widely used all over the world: Silicon Powder, Alumina Powder, Dry Coal Powder, Limestone Slurry, Gypsum Slurry, Plaster, Fly Ash, Mining Ore, Coal Powder Injection, Metallurgical dust, Thermal Power plant FGD, Petroleum Solid Catalyst,TiO2 suspension with sulfuric acid, Ammonia solution with powder, Hydrochloric Acid, Liquid Chlorine, Bulk Material.Design Features:1. Forged steel 3 piece body design:FOYO Floating Ceramic ball valve can fulfill existing connection requirements such as face-to-face dimensions and customers' existing flange type. 2. The wet parts are all ceramics---Ceramic fully lined:Ceramic components are assembled into forged metal body of Floating Ceramic ball valve which absorbs most physical loads and shock from piping lines.3. Customized Actuation Types:Actuator is connected to Floating Ceramic ball valve by a yoke that meets ISO 5211 specification including most pneumatic and electric actuators. The yoke is re-movable and easily modified to meet special requirements. Levers operated methods are also available for Floating Ceramic ball valve. SIZE | DN15 | DN20 | DN25 | DN32 | DN40 | DN50 | DN65 | DN80 | DN100 |
1/2" | 3/4" | 1" | 1-1/4" | 1-1/2" | 2" | 2-1/2" | 3" | 4" |
ISO 5211 | F05/F07 | F05/F07 | F05/F07 | F05/F07 | F05/F07 | F07/F10 | F07/F10 | F07/F10 | F10/F12 |
ΦK1 | 50 | 50 | 50 | 50 | 50 | 70 | 70 | 70 | 102 |
n-d1 | 4-Φ8 | 4-Φ8 | 4-Φ8 | 4-Φ8 | 4-Φ8 | 4-Φ10 | 4-Φ10 | 4-Φ10 | 4-Φ12 |
ΦK2 | 70 | 70 | 70 | 70 | 70 | 102 | 102 | 102 | 1025 |
n-d2 | 4-Φ10 | 4-Φ10 | 4-Φ10 | 4-Φ10 | 4-Φ10 | 4-Φ12 | 4-Φ12 | 4-Φ12 | 4-Φ14 |
SxS | 9x9 | 9x9 | 9x9 | 11x11 | 11x11 | 14x14 | 19x19 | 19x19 | 22x22 |
H1 | 89.5 | 94 | 94 | 103 | 108 | 135 | 146 | 160 | 196 |
H2 | 12 | 12 | 12 | 14 | 15 | 15 | 18 | 20 | 27 |
Torque N.M | 19 | 25 | 25 | 30 | 50 | 70 | 110 | 160 | 250 |
* Note: The torque value is at 6 bar air without safety factor, recommended safety factor is 1.3, excessive output torque may cause rupture to the ceramic ball.4. Corrosion Resistant:Cold Isotactic Pressing (CIP) and high-temperature sintering nanometer high-purity 99% Al2O3 and 99.7% Al2O3 (alumina) and ZrO2 (zirconia) ceramics will not interact with almost all organic and inorganic chemicals, nor contaminate process medium. Their physically and chemically stability against most acids, salts and alkalis will last for many years with little or no corrosive degradation, which make sure that Floating Ceramic ball valve have excellent performance in corrosive applications.5. Abrasion Resistant:The hardness of 99% alumina ceramics is about HRA88, harder than zirconia (about HRA85), solid tungsten carbide is about HRA 90, which is about 8 times harder than stainless steel. As valve trim, ceramic components make Floating Ceramic ball valve work well in the most severe abrasive conditions, such as pneumatic conveying to transport silicon powder, coal powder, Mg powder, Fly ash, etc.6. Ceramic-to-Ceramic spherical seated:The perfect fine grinded spherical seal between ceramic ball and seat ensure a Class VI shutoff. The anti-scratch design between ball and seat, which prevent sealing surface from being scratched by particles. The ceramic ball will not be stuck so ball will not be broken.7. V-port balls and Round-port balls:FOYO offers all size of Floating Ceramic ball valve two different port: Round-port and V-Port balls. In general, the round-port ceramic ball valve is often used as an on-off valve. If precise and stable control performance is required in any corrosive and abrasive applications, V-port Floating Ceramic ball valve with equal percent characteristics may be the best choice.
ที่อยู่:
No. 99, Tong Fu Road, Tong′an District, Xiamen, Fujian, China
ประเภทของธุรกิจ:
ผู้ผลิต/โรงงานผลิต
ขอบเขตธุรกิจ:
อุปกรณ์และส่วนประกอบอุตสาหกรรม
การรับรองของระบบการจัดการ:
ISO 9001
แนะนำบริษัท:
FOYO ผลิตวาล์วเซรามิกรวมถึงวาล์วลูกบอลเซรามิกวาล์วลูกกลมเซรามิคแบบพอร์ทตัววีเช็ควาล์วเซรามิควาล์วแผ่นคู่เซรามิควาล์วลูกโลกเซรามิควาล์วแบบปีกกาเซรามิก วาล์วเกตใบมีดเซรามิกและอุปกรณ์เชื่อมต่อท่อเซรามิกอื่นๆซึ่งใช้สำหรับการควบคุมของเหลว วาล์วเซรามิคใช้สำหรับจัดการกับงานที่มีการกัดกร่อนมากที่สุดหรือ ( และ ) ซึ่งรวมถึงการทำเหมืองโรงงานผลิตพลังงานถ่านหินงานเหล็กโพลีไอคอนการลำเลียงนิวแมติกการรีไซเคิล เหมืองแร่น้ำมันและก๊าซเยื่อกระดาษและเคมีปิโตร
FOYO จะจ่ายวาล์วและวาล์วที่เกี่ยวข้องให้กับลูกค้าของเราสำหรับการใช้งานที่ต้องการมากที่สุด
FOYO มีวาล์วและการกำหนดค่าวาล์วหลายแบบเพื่อวัตถุประสงค์และเงื่อนไขต่างๆได้แก่การใช้งานที่แตกต่างกัน ( เปิด / ปิดควบคุม ) ของเหลวต่างๆ ( ของแข็งของเหลวหรือก๊าซติดไฟได้ สารพิษหรือสารกัดกร่อน ), วัสดุที่แตกต่างกัน ( โลหะหรือไม่ใช่โลหะ ) และแรงดันและอุณหภูมิที่แตกต่างกัน ( การใช้งานในสภาวะที่มีแรงดันต่ำปานกลางหรือสูงและการใช้งานในอุณหภูมิต่ำ , อุณหภูมิห้องหรือสูง )
วาล์ว FOYO ได้รับการออกแบบผลิตและทดสอบอย่างเข้มงวดตามมาตรฐาน API, ANSI-S, JIS, DIN และมาตรฐานสากลอื่นๆ วัสดุของตัววาล์วได้แก่เหล็กคาร์บอนสแตนเลสสตีลเหล็กกล้าพิมพ์สองด้านอลูมิเนียมและเซรามิคเซอร์คอน 99 เปอร์เซ็นต์ไทเทเนียมนิกเกิลและวัสดุอื่นๆที่ลูกค้าของเรากำหนด
เรายืนยันที่จะนำเสนอผลิตภัณฑ์คุณภาพสูงและบริการที่ดีที่สุดแก่ลูกค้าของเรา เราตั้งเป้าไว้ที่ความก้าวหน้าและความก้าวหน้าที่เหนือกว่าทั้งในด้านบริการและเทคโนโลยี
ความต้องการของลูกค้าคือสิ่งที่มีความสำคัญสูงสุดของ FOYO โปรดส่งความต้องการของคุณมายังเราและใช้ประโยชน์จากประสบการณ์และความรู้ที่ครอบคลุมของเรา