| ของคุณ: | ความสามารถในการย่อยสลายออกซิเดชัน |
|---|---|
| วัสดุ: | Polyamide ( ไนลอน 6.66 )/PA |
| การใช้งาน: | พลาสติกทั่วไป, พลาสติกวิศวกรรม, พลาสเตอร์พิเศษ |
| คุณสมบัติของพลาสติกหลังจากได้รับความร้อน: | เทอร์โมพลาสติกเทอร์โมพลาสติก |
| วิธีการขึ้นรูปพลาสติก: | การฉีด |
| สี: | สีขาว |
ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว LNP ELCRES SLX1271D is a low viscosity, weatherable polycarbonate copolymer blend with enhanced UV stabilization available in diffusive colors. It offers the potential for selective plating on PC/ABS in intricate geometries via a 2K molding process. The material is an ideal material for automotive exterior applications.
| Product Description | ||||
| LNP ELCRES SLX1271D is a low viscosity, weatherable polycarbonate copolymer blend with enhanced UV stabilization available in diffusive colors. It offers the potential for selective plating on PC/ABS in intricate geometries via a 2K molding process. The material is an ideal material for automotive exterior applications. | ||||
| General | ||||
| Form | Resin Pellets | |||
| Feature Excellent Processability Outdoor Diffusive | ||||
| Uses | Automotive | Electrical | ||
| Physical | Nominal Value | Test Method | ||
| Density | 1.21 g/cm³ | ISO 1183 | ||
| Moisture Absorption(23 °C;50% RH/Equilibrium) | 0.15 % | ISO 62-4 | ||
| Water Absorption(23 °C;saturated) | 0.32 % | ISO 62-1 | ||
| Melt Volume Rate, MVR(1.2 kg;MVR at 300 °C) | 16 cm³/10 min | ASTM D1238 | ||
| Specific Gravity | 1.2 | ASTM D792 | ||
| Melt Flow Rate[MFR](300 °C;1.2 kgf) | 18 g/10min | ASTM D1238 | ||
| Mold Shrinkage, Flow | 0.75 % | SABIC Method | ||
| Mechanical | Nominal Value | Test Method | ||
| Notched Izod Impact Strength | ISO 180/1A | |||
| notched;80*10*3;23 °C 0 | 10 kJ/m² | |||
| 80*10*3;0 °C;Notched | 9 kJ/m² | |||
| notched;80*10*3;-30 °C 0 | 7 kJ/m² | |||
| Charpy Impact, V-Notched | ISO 179 1eA | |||
| 23 °C;Edgew;80*10*3;sp=62mm 0 | 8 kJ/m² | |||
| -30 °C;Edgew;80*10*3;sp=62mm 0 | 7 kJ/m² | |||
| Multi-Axial Instrumented Impact, Total Energy | ISO 6603-2 | |||
| 23 °C | 110 J | |||
| -30 °C | 108 J | |||
| Izod Impact, Notched | ASTM D256 | |||
| 0 °C | 99 J/m | |||
| 23 °C | 239 J/m | |||
| -30 °C | 98 J/m | |||
| Instrumented Dart Impact, Total Energy(23 °C) | 57 J | ASTM D3763 | ||
| Instrumented Dart Impact, Peak force(23 °C) | 5900 N | ASTM D3763 | ||
| Tensile Modulus 1 mm/min 5 mm/min |
2256 MPa 2292 MPa |
ISO 527 ASTM D638 |
| Tensile Stress, Yield 50 mm/min 50 mm/min;Type I |
66 MPa 65 MPa |
ISO 527 ASTM D638 |
| Tensile Stress, Break 50 mm/min 50 mm/min;Type I |
68 MPa 62 MPa |
ISO 527 ASTM D638 |
| Tensile Strain, Yield 50 mm/min 50 mm/min;Type I |
6.2 % 6.3 % |
ISO 527 ASTM D638 |
| Tensile Strain, Break 50 mm/min 50 mm/min;Type I |
115 % 83 % |
ISO 527 ASTM D638 |
| Flexural Modulus 2 mm/min 1.3 mm/min;50 mm;span |
2255 MPa 2480 MPa |
ISO 178 ASTM D790 |
| Flexural Strength 2 mm/min 1.3 mm/min;50 mm;span |
97 MPa 98 MPa |
ISO 178 ASTM D790 |
| Thermal | Nominal Value | Test Method |
| HDT/Af(1.8) | 123 °C | ISO 75/Af |
| HDT/Bf(0.45) | 134 °C | ISO 75/Bf |
| Vicat Softening Temperature | ||
| Rate B/50 | 138 °C | ISO 306 |
| Rate B/120 | 139 °C | ISO 306 |
| Rate B/50 | 138 °C | ASTM D1525 |
| Rate B/120 | 139 °C | ASTM D1525 |
| CTE, Flow 23°C to 50°C 23°C to 50°C |
7.1e-05 1/°C 7.1e-05 1/°C |
ISO 11359-2 ASTM E831 |
| CTE, XFlow 23°C to 50°C 23°C to 50°C |
7.2e-05 1/°C 7.2e-05 1/°C |
ISO 11359-2 ASTM E831 |
| Heat Deflection Temperature[HDT], Unannealed 3.2 mm;1.82 MPa 0.45 MPa;3.2 mm |
123 °C 133 °C |
ASTM D648 |
| Processing | Nominal Value | |
| Drying Temperature<Injection> | 120 °C | |
| Drying Time<Injection> | 2 - 4 hrs | |
| Maximum Moisture Content<Injection> | 0.02 % | |
| Melt Temperature<Injection> | 280 - 310 °C | |
| Rear, Zone 1 Temperature<Injection> | 260 - 280 °C | |
| Middle, Zone 2 Temperature<Injection> | 270 - 290 °C | |
| Front, Zone 3 Temperature<Injection> | 280 - 310 °C | |
| Nozzle Temperature<Injection> | 270 - 290 °C | |
| Mold Temperature<Injection> | 80 - 110 °C |
Forever Co.,Ltd
