ข้อมูลพื้นฐาน
ไม่ใช่ ของรุ่น
CX-GF60/160R
การประยุกต์ใช้งาน
อุตสาหกรรม
น้ำมันเชื้อเพลิง
Electric Heating
เครื่องหมายการค้า
CX-Induction
แพคเพจการขนส่ง
Standard Exporting Wooden Box
ข้อมูลจำเพาะ
D: 600mmX1600mm( customizable)
รหัสพิกัดศุลกากร
8514109000
คำอธิบายสินค้า
Extreme Temperature Graphitization Furnaces - Horizontal Series
Product Introduction
CX-GF series are front loading batch type induction heating furnaces with round or cubic hot zone shape. Cubic hot zones are specially designed for clients who are not satisfied with round hot zones due to some reasons such as dead space.
Maximum operating temperature of 3000°C can meet all demands in carbon material's graphitization treatment.
These furnaces use medium frequency induction heating method. A water cooled induction coil installed inside the furnace. At the center of the coil, there is a graphite crucible as the susceptor for the induction current, surrounded by carbon felt as the insulation material.
Horizontal design of these series, features simple working principle compared to vertical series. The main advantages of horizontal design are easy loading/unloading, easy clean-up of furnace inside, simple operation and maintenance for workers, and easy replacement of consumable spare parts, but the cost of horizontal series is relatively higher than vertical series.
Application
Sintering and Graphitization treatment of carbon materials, synthetic graphite film (Polyimide Graphite Flake and abbreviated PI film), heat conductive materials, carbon fiber rope, carbon fiber, C/C composites, and other carbon materials are only some of the applications of these furnaces.
General Features3000°C extreme temperature which can meet demands for all kinds of graphitization processes.Horizontal front loading with single chamber or multi chambers design for high production capacity. The shell and door are water-cooled jacketed. The furnace shell is made of SUS304 stainless steel. The inner stainless steel wall features long time uses without rusting as well as less adsorption of induction eddy currents in comparison to plain carbon steel.Induction coil covered by high quality alumina coating in order to avoid short circuit between coil and carbon felt.High vacuum pneumatic valves equipped with position indicator in order to automatic control of the vacuum and gas supply system.Over-temperature, over-pressure, gas status, water lack and power failure alarms and automatic mechanical interlock for over-pressure protection.All the running parameters are stored in the PLC system. All stored parameters can be transferred into your personal computer through a USB port.High precision smart temperature controller which can store 20 programs with total 400 segments.International famous brand accuracy pyrometer with temperature measuring range of 1000~3200°C or 600~3100°C. The accuracy of temperature measurement is 0.2~0.75%. Fully automatic PLC monitoring system.Remote operation, failure diagnosis and software upgrading.High automatic equipment, all the on/off switch components and all the running parameters are stored with the digital format in the PLC date base, there have communication interface for the convenience of customer intervene.Patented design for solving the erosion problem of the graphite crucible of the horizontal graphitization furnaces. Our patented design, increased the crucible life in a way that, crucible erosion be less than 5 mm after 60 batches treatment.The specially designed induction coil undergone 5 times insulation process, which completely solved the insulation applicable problem of induction coil under high temperature, and it guaranteed the proper insulation ability under the corundum ageing, break circumstance, it can also effectively prevent the fire on coil and power leakage incident.Optional FeaturesHigh Vacuum System: Vacuum and high vacuum operation of these furnaces is only possible up to 2200°C.Gas Purification SystemClosed Loop Cooling Water SystemDistributed Control System (DCS)Multi chambers (with only one control cabinet for all chambers)
Technical Details of Round Hot Zone Models
Model | CX-GF40/100R | CX-GF50/100R | CX-GF60/120R | CX-GF60/160R |
Max Working Temperature | 3000°C |
Usable Space (mm) W×H×L | Φ400×1000 | Φ500×1000 | Φ600×1200 | Φ600×1600 |
Max. Loading Capacity(L) | 125 | 196 | 339 | 452 |
Temperature Uniformity (ΔT between 1000°C and 2200°C) | ±10°C |
Max. Heat-up Rate (CEDRT)* | 15°C/min (RT~1500°C), 10°C/min (1500°C~2500°C), 5°C/min (2500°C~3000°C) |
Heating Power | 200 KW | 250 KW | 300 KW | 350 KW |
Frequency | 2000 Hz | 1500 Hz | 1500 Hz | 1500 Hz |
Ultimate Vacuum (CEDRT)* | 1.2×10-3 mbar |
Optional High Vacuum (CEDRT)* | 5×10-5 mbar |
Pressure Rise | 1.3×10-2 mbar/hr |
Working Atmosphere | High Vacuum (Optional) / Vacuum / Inert Gas (Ar or N2) Vacuum and high vacuum atmosphere is only permitted up to 2200°C. |
Supply Voltage | 3P, 380V, 50Hz/60Hz |
Cooling Water Pressure | 1.5~2.5 bar |
Cooling Water Temperature | ≤28 °C |
* CEDRT: Clean, Empty, Dry, Room Temperature Furnace
Technical Details of Round Hot Zone Models
Model | CX-GF40/100C | CX-GF50/100C | CX-GF60/120C | CX-GF70/160C | CX-GF70/200C |
Max Working Temperature | 2850°C | 2650°C | 2500°C |
Usable Space (mm) W×H×L | 400×400×1000 | 500×500×1000 | 600×600×1200 | 700×700×1600 | 700×700×2000 |
Max. Loading Capacity | 160 | 250 | 432 | 784 | 1296 |
Temperature Uniformity (ΔT between 1000°C and 2200°C) | ±20°C | ±30°C |
Max. Heat-up Rate (CEDRT)* | 15°C/min (RT~1500°C), 10°C/min (1500°C~2500°C), 5°C/min (2500°C~3000°C) |
Heating Power | 250 KW | 300 KW | 350 KW | 500 KW | 500 KW |
Frequency | 1500 Hz | 1500 Hz | 1000 Hz | 1000 Hz | 1000 Hz |
Ultimate Vacuum (CEDRT)* | 1.2×10-3 mbar |
Optional High Vacuum (CEDRT)* | 5×10-5 mbar |
Pressure Rise | 6.7×10-3 mbar/hr |
Working Atmosphere | High Vacuum (Optional) / Vacuum / Inert Gas (Ar or N2) Vacuum and high vacuum atmosphere is only permitted up to 2200°C. |
Supply Voltage | 3P, 380V, 50Hz/60Hz |
Cooling Water Pressure | 1.5~2.5 bar |
Cooling Water Temperature | ≤28 °C |
| | | | | | |
* CEDRT: Clean, Empty, Dry, Room Temperature Furnace
NOTE: The Crucible will use high power combined graphite material if the size more than H700XW700.
ที่อยู่:
No. 473, Xiangneng Industrial Park, Hongqi North Road, Shifeng District, Zhuzhou, Hunan, China
ประเภทของธุรกิจ:
ผู้ผลิต/โรงงานผลิต, บริษัทการค้า
ขอบเขตธุรกิจ:
อุปกรณ์และส่วนประกอบอุตสาหกรรม, เครื่องจักรการผลิตและแปรรูป, โลหการ แร่ และพลังงาน, ไฟฟ้าและอุปกรณ์อิเล็กทรอนิกส์
การรับรองของระบบการจัดการ:
ISO 9001
แนะนำบริษัท:
บริษัท ZhuZhou ChenXin Induction Equipment Co., Ltd (CX-Induction หรือ CX-Induction ก่อตั้งขึ้นในปี 2003 อุตสาหกรรมการไฟฟ้าและเทคโนโลยีที่ใช้ในอุตสาหกรรมอวกาศและอุตสาหกรรมอวกาศของจีนได้พัฒนาขึ้นมาเป็นอย่างดีโดยให้บริการเครื่องมือและเทคโนโลยีสำหรับบริษัทชั้นนำของจีนในอุตสาหกรรมอวกาศอวกาศยานทหารวัสดุขั้นสูงวิศวกรรมเซรามิกคาร์บอนไฟเบอร์และวัสดุที่เกี่ยวข้อง
และรถยนต์เป็นต้น - การเหนี่ยวนำที่เกี่ยวข้องกับการออกแบบและการผลิตการบำบัดความร้อนด้วยการเหนี่ยวนำอุณหภูมิสูงและเตาหลอมที่มีให้เลือกตั้งแต่ 1500 º C ถึง 3000 º C ด้วยการใช้เทคโนโลยีและอุปกรณ์สมัยใหม่ที่กำลังพัฒนาและปรับปรุงอยู่เสมอ เราเป็นผู้ผลิตเตาหลอมอุณหภูมิสูงพิเศษที่มีชื่อเสียงที่สุดในประเทศจีน
การแนะนำผลิตภัณฑ์ในแนวนอนแบบ CX-Induction มีเตาหลอมหลากหลายตั้งแต่ประเภทอ่างอาบน้ำสำหรับการผลิตขนาดใหญ่และชุดต่อเนื่องไปจนถึงเตาหลอมสำหรับห้องปฏิบัติการขนาดเล็กและ R&D เพื่อใช้งานที่อุณหภูมิสูงถึง 3000 ° C เรานำเสนอทั้งการออกแบบและขนาดมาตรฐานและอุปกรณ์ที่ผลิตขึ้นตามความต้องการของลูกค้าแต่ละราย
อุตสาหกรรมชั้นนำของจีนที่ติดตั้งมากกว่า 150 เครื่องเรามีประสบการณ์ที่หลากหลายที่จำเป็นในการนำเสนอเทคโนโลยีที่เหมาะสมซึ่งช่วยให้คุณสามารถบรรลุความยืดหยุ่นสูงสุดและตอบสนองความต้องการของอุตสาหกรรมได้อย่างเคร่งครัด ทีมมืออาชีพของเราที่มีสมาชิกที่มีความรู้สูงในสาขาวิชาเฉพาะเช่น PhD วิศวกรรมเซรามิควิศวกรรมเครื่องกลและวิศวกรรมไฟฟ้าพร้อมให้คำแนะนำและตอบคำถามของคุณเสมอ
การจัดหาอุปกรณ์เป็นเพียงก้าวแรกของความร่วมมือของเราคุณจะเห็นประโยชน์ของเราในการบริการหลังการขายและการสนับสนุนด้านเทคโนโลยี !