แนวคิดใหม่ของผลิตภัณฑ์ 2021 E10 เอียร์บัดแบบไร้สายอย่างแท้จริง หูฟังไร้สาย Bluetooth ที่เรืองแสงสำหรับการเล่นเกม

Packing list

Wireless headset host

Endurance charging box

Micro 5pin charging cable

User manual

Earplug silicone cap


Product specification

Product model:E10
version: V5.1
Battery specification: earphone 3.7v ; Charging bin 3.7v
Supported mode: HFP/HSP/ A2DP/AVRCP
Sensitivity: 105dB ±3dB S.P.L at 1KHz
Signal distance: 10 m (in an ideal environment without any large obstacles)
Playing time: about 2.5 hours
Talk time: approximately 3 hours
Standby time: about 80 hours
Charging time: charge the charging warehouse for about 1.5 hours,
 and charge the headset for about 1 hour
Charging times for the headset: about 15 times

  

 Functional instructions
1.Boot
Take the headset out of the charging bin and start it automatically or long press the left and right multi-function button of the headset for 3 seconds.

2. Shut down
Put the headset into the charging bin and turn off automatically.

3. Boot back
When the pairing is successful, the bluetooth headset will first enter the state of reconnect when the second time is started and automatically reconnect the connected phone.

4. Play/pause
In standby state, click the left or right earphone multifunction button to play music directly, while click the left or right earphone multifunction button to pause playing.

5. Switch songs
Press the left earphone muti_function button for 2 seconds to play music, and then press the right earphone muti_function button for 2 seconds to play music.

6. Volume up and down
Double-click the left earphone multifunction button to increase the volume step by step, and double-click the right earphone multifunction button to decrease the volume step by step

7. Answer incoming calls
When the mobile phone calls, click the left or right earphone multifunction button can answer the phone.

8. Call hang up
When talking on the mobile phone, you can hang up the phone by clicking the left or right earphone multifunction button.

9. Call relection
When the phone calls, long press the left and right earphone multifunction button for 2 seconds to reject the call.
 

1. Redial

When you are on standby or playing music, you can make the last call in your phone record by three clicks of the left earphone multifunction button.

11. Start voice assistant
Three clicks on the right earphone multifunction button can activate apple's Siri or Google voice assistant for voice control of the phone operation.

12. Low battery alert
When the battery of bluetooth headset is low, play the warning sound of low battery at an interval of 30 seconds until the headset is low battery and turns off.

pairing method

1. Take out from the charging warehouse or press the left and right earphone multifunction button for 3 seconds to start up the headset until the red and blue lights flicker alternately, enter the state of search and pairing for the ear, enter the state of automatic pairing for the ear. After the pairing is successful, the red and blue lights of the main ear (right ear) continue to flicker alternately, while the blue lights of the secondary ear slowly flash, and play the prompt sound of successful pairing for the ear.

2. Start the bluetooth function of mobile phone or other devices. If it is an android phone or device, please click the "search bluetooth device" option. When the model of the bluetooth headset is found, click to enter pairing; After the pairing is successful, the main (right) ear will send out a signal that the connection is successful, and the indicator lights of the left and right earphones will turn to blue light and enter the standby state of connection. After the pairing is successful, the main ear will be the right channel, and the secondary ear will be the left channel.

3. The two earphones can also be paired with the mobile phone independently. The operation method can be operated according to the operation method in step 2 above.

Charging operation
1. Plug one end of the Micro USB charging cable into the USB port of the charging warehouse and plug one end of the charger to charge the charging warehouse. The LCD will display the latest power.

2. Charge the earphone: put the earphone into the charging bin to charge it automatically. The earphone indicator is red when charging, and it will be off after being fully charged. The LCD of the charging cabin will display the remaining power. When the headset is fully charged, the LCD of the charging cabin will go out.

Precautions
1. Please charge in a safe environment. When charging the charging warehouse, please separate the charging warehouse from the USB charging cable as soon as possible after the charging indicator is off, so as to avoid damage to the charging warehouse caused by the long time of charging.

2. When the music is playing, please adjust the music to the appropriate volume to avoid long-term damage to the hearing under the condition of high volume.

3. Try to avoid using the earphone where there is interference source, otherwise it may affect the earphone signal.

4. Try to avoid using the earphone in a corrosive environment, so as not to affect the function of the earphone.



Tips: when you use this bluetooth headset to listen to music or talk, please pay attention to adjust the volume, so as not to affect your listening too much!


FAQ
 Q1. Do you accept ODM order??
A: Yes,supported by our well-experienced R&D Team,provide best solution for your project.

Q2: Can we have our logo or company name to be printed on your products or the?package? 
A: Yes, definetly. We can print your Logo and company name etc in our products by silk screen printing according to your artwork design, and the minimum quantity for silk screen printing is 1000 units per logo/one colour. You can send us the artwork by email in JPG(prefered), TIF, AI, EPS, TIFF or CorelDraw formats.

Q3. What's your minimum order quantity?
A: Different model with different MOQ, for bulk order,normally  MOQ 1000pcs, small qty for trial order is also welcome.


Q4. How soon is the lead time??
A: For sample order,1-7 days,for bulk order,10-45 days.Different model have different lead time.

Q5: How can you guarantee the quality?
A: We have a Professional QC team to control the product quality.
 Chongqing Ren Da Tong Technology Co., Ltd. was established in 2019 in the Puli New District of Chongqing. The factory area is about 35,000 square meters and is invested in 50 million yuan, which is a high-tech enterprise that integrates high-end electronic research and development, production, and sale. The factory has set up a number of clean-up and thermostatic workshops, which have several automatic LCD components, SMT patch cables, etc., mainly produce LCD TFT LCD monitors, PCBA integrated circuits, and other semi-finished products, as well as computers, The company's main business is located in major cities in China and in countries such as Europe, Canada, Dubai, India, and other countries. Offline multi-channel support to build a complete sales network. The research and development organization in the factory has many engineers and personnel with advanced education, and is dedicated to the research and development of electronic products; it always uses a humanistic management model, innovates a win-win market spirit, and serves the customers back to society. Rentaitong Technology is a national high-tech company with strong design capabilities and multiple product inventions, ensuring that we keep rolling out new products and have customized solutions to serve our customers. Through the National Test Lab, ensure that the product meets the different requirements of different customers. We continue to develop new products and learn new technologies. We hope to help more customers resolve communication connectivity issues, and we look forward to seeing more friends from all over the world choose us to guide us and let us grow with you.

Our patent

Our Certification

Our equipment