DTL-2 Copper Aluminium Bimetal Termination Connection Lugs
Products property:
- will not happen corrosion,compare to aluminium connector.
- use for termination.
- the friction welding is well done.
- its barrel capped is fulled with joint compound to avoid oxidization.
- the type test is follow IEC61238-1
- Material:E-Cu,Al-99.6% Surface treatment:Bright
|
Modle |
Conductor Range |
|
DTL-2-16 |
16 |
|
DTL-2-25 |
25 |
|
DTL-2-35 |
35 |
|
DTL-2-50 |
50 |
|
DTL-2-70 |
70 |
TYPE:DTL-2-16,DTL-2-25,DTL-2-35,DTL-2-50,DTL-2-70,DTL-2-95,DTL-2-120,DTL-2-150,DTL-2-185,DTL-2-240,DTL-2-300,DTL-2-400,DTL-2-500
(Performance testing)
2.1 Mechanical performance:the grip force of the wire clamp is 1/10 bigger than the break force of the lead. It comply with GB2314-1997
2.2 Temperature rise performance: under the conditìon of big current, the temperature rise of connector is less than that of connection lead.
2.3 Heat circle performance:confirms to GB/T2317.3-2000,the beat circle trial standard for electric fitting.
2.4 Waterproof insulatìon performance:confirms to the relevant requirements in Part 2 of GB/TI3140.4-1998,
2.5 Resistance to corrosion performance: under the conditìon of SO, and salt fog, it can do three tìmes of fourteen days circle testìng.
2.6 Environmental aging performance:under the circumstance of ultraviolet, radiation, dry and moist, expose if with change of temperature and beat impulse for six weeks.
2.7 Fire-proof performance: insulation material of the connector withstands glowing filament test. Confirm to the requirements in Chapter4-1 0 of GBrr5169.4
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 
