ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว | Item | Details |
|---|---|
| Description | AirEngine8760-X1-PRO(11ax indoor,Dedicated 3rd Radio,4+12 dual bands,smart antenna,USB,IoT Slot,BLE) |
| Part Number | 02353GSG |
| Model | AirEngine 8760-X1-PRO |
| subseries | AirEngine 8700 |
| First supported version | V200R019C10 |
| Item | Specification |
|---|---|
| Installation Type |
|
| Dimensions without packaging (H x W x D) [mm(in.)] | 61 mm x 220 mm x 220 mm (2.40 in. x 8.66 in. x 8.66 in.) |
| Weight without packaging [kg(lb)] | 1.85 kg (4.08 lb) |
| Storage | NAND Flash 512 MB; NOR Flash 16 MB |
| Console port | BLE console |
| Maximum power consumption [W] | 55.0 (excluding USB and IoT cards) |
| Maximum heat dissipation [BTU/hour] | 187.6 (without USB or IoT card) |
| Power supply mode |
|
| Rated input voltage [V] | 48 V |
| Input voltage range [V] |
DC: 43.2 V to 57.6 V PoE: 802.3bt/at x 2 (When PoE power supply is used: If the power supply types of the two ports are different, the power supply in compliance with a later standard is used; if the power supply types of the two ports are the same, power supply backup is achieved.) |
| Service port surge protection [kV] |
PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B |
| Maximum number of physical ports on the entire device |
10GE (RJ45) x 2, 10M/100M/1000M/2.5GE/5GE/10GE auto-sensing 10GE optical port (SFP+), GE/10GE auto-sensing |
| Long-term operating temperature [°C(°F)] | -10°C to +50°C (14°F to 122°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.) |
| Storage temperature [°C(°F)] | -40°C to +70°C (-40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH |
| Long-term operating altitude [m(ft.)] | -60 m to +5000 m (-196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
| Ground | Ground |
| USB | USB 2.0 |
| IoT slot | IoT card |
| BLE | BLE5.0 |
| Radio number | 2/3 |
| Operating frequency band |
|
| MIMO spatial streams |
Triple-radio mode:
Dual-radio mode:
|
| Wi-Fi standard |
2.4G: 802.11b/g/n/ax 5G: 802.11a/n/ac/ac Wave 2/ax |
| Radio interface | Built-in smart antennas |
| Antenna gain |
2.4G: 4 dBi 5G: 5.5 dBi BT: 4 dBi |
| Maximum transmit power |
2.4G: 26 dBm (Max) 5G: 31 dBm (Max)
NOTE:
This is the total MIMO radio power, which is the same as: 2.4G: 20 dBm/chain (Max) 5G: 20 dBm/chain (Max) BLE: < 10 dBm |
| Singal radio transmit power [dBm] |
2.4G: -10 dBm to 20 dBm/chain 5G: -10 dBm to 20 dBm/chain |
| MTBF [year] | 59.4 year |
| MTTR [hour] | 0.5 hour |
| Frequency stability [ppm] | +/-20 |
| 802.3bt power supply description |
When the AP is powered by 802.3bt class 8, no function is restricted.
If dual 802.3bt class 6 power supplies are used, Wi-Fi:
Wired network port: No function is restricted. Other ports: Both one USB port and two IoT card slots are available. If the USB port or IoT card slots are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact your product manager.
If single 802.3bt class 6 power supplies are used, Wi-Fi:
Wired network port: Two 10GE electrical ports and the SFP+ optical port work as combo ports. When one of them is working, the other two are unavailable. Other ports: Both one USB port and two IoT card slots are available. If the USB port or IoT card slots are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact your product manager. |
| 802.3at power supply description |
If dual 802.3at power supplies are used, Wi-Fi: If no USB port or IoT card slot is used, the radio power is self-adapted.
If the USB port or IoT card slots are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact your product manager. Wired ports: The rate of both 10GE electrical ports is reduced to GE or lower, and the SFP+ optical port is unavailable. Other ports: The 2.5 W USB and IoT card is mutually exclusive. That is, when one of them is working, the other is unavailable. The IoT card takes precedence. If the USB port or IoT card slots are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact your product manager.
If single 802.3at power supply is used, Wi-Fi: If no USB port or IoT card slot is used, the radio power is self-adapted.
If the USB port or IoT card slots are used, the number of spatial streams, transmit power, and bandwidth may be affected. For details, contact your product manager. Wired ports: The rate of both 10GE electrical ports is reduced to 1 Gbit/s or lower, and work with the SFP+ optical port as combo ports. When one of them is working, the other two are unavailable. Other ports: The 2.5 W USB and IoT card is mutually exclusive. That is, when one of them is working, the other is unavailable. The IoT card takes precedence. If the USB port or IoT card slots are used, Wi-Fi can work only in 2.4 GHz (2x2) + 5 GHz (2x2) mode. For details, contact your product manager. |
| DC power supply description | No function is limited. |
Chongqing Chimu Technology Co., Ltd. was established in 2011, we have been engaged in this industry 11 years. Relying on 11 years of deep experience in the communication field and scientific and technological innovation ability, through the integration of multi-brand, full series of communication products resources, with a one-stop service model. Let the network better connect you and me, connect the world. In order to meet the needs of customers, we have eatablished a perfect supply chain system to provide super products with reliable quality and reasonable price.
We are devoted to offering Switches, Routers, Servers, Storages, LTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP. Our long-term aim is to provide users high-quality, efficient, economic, timely services. Looking forward to establish long-term and win-win business relations with you.
A)Stable and Wide Supply Chain System
we have established a perfect supply chain system to provide a wide range of products with reliable quality and reasonable price.
B)Competitive Price
We ensure the most competitive price. Warm reminders here, telecommunications equipment configuration is quite different, the price shown on the website is only for reference. After configuration and quantity been confirmed, we will give the final most competitive discounted price.
C) Safe and Easy Payment Solutions
We accept all major credit cards, PayPal and wire transfer.
D)Fast Delivery and Shipping
Fast, professional and reliable delivery.
E)11 Years Experience
we have been engaged in this industry more than 11 years, we have rich industry experience.
Q: How about your main products?
A: Our product lines include Switches, Routers, SFP Modules, OLTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP etc.
Q: What brand of products do you offer?
A: We can supply all the brands you need.
Q: what services can we provide?
A:Accepted Delivery Terms: FOB,CFR,EXW,FCA;
Accepted Payment Currency:USD,EUR,CAD,HKD,GBP,CNY;
Accepted Payment Type: T/T,MoneyGram,PayPal,Western Union,Cash etc...
Q: Can we get free samples?
A: Sorry, it is not available, but you can pay for one.
Q. How can we guarantee quality?
A:Always a pre-production sample before mass production;
Always final Inspection before shipment;
Q: How about your delivery time?
A: Generally, it will take 1 to 10 days after receiving your deposit. The specific delivery time depends on the items and the quantity of your order.
Q: Do you test all your goods?
A: Yes, We have professional engineer to test all devices before shipping.
Q:How about the MOQ?
A:1 piece
ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 
