ข้อมูลพื้นฐาน
Warranty
1 Year After Shipped on Board
Surface Finish Process
The Surface Can Be Customized
Mould Cavity
Single Cavity or Multi Cavity
Plastic Material
PP. The Material Can Be Customized
Process Combination Type
Compound Die
Application
Car, Household Appliances, Furniture, Commodity, Electronic, Home Use, Hardware, Mechanical Parts, Medical Parts, Any Industry Part
Runner
Cold or Hot Runner According to Part Construction
Design Software
Step, Step
Certification
TS16949, ISO
After-sales Service
1 Year Guarantee
เครื่องหมายการค้า
Cents or Customized
คำอธิบายสินค้า
Product Description
OEM/ODM Design Mechanical Plastic Injection Parts Moulding Thread Tooling Die
Product Parameters
NOTE: BELOW INFORMATION IS JUST OUR STANDARD SPECIFICATION. AND WE USUALLY DO CUSTOMIZATION ACCORDING TO YOUR REQUIREMENT. SO FOR YOUR PROJECT, PLEASE SEND:
*** 3D drawing in stp, step format, our engineer will check the 3D drawing to see if the mold can be realized or not.
*** Material should be advised,
*** 2D file to show the tolerance and surface requirement, we can reach toleracnce for mold +-0.05mm. We will check if the parts can be injected
or should use IML/IMD technology (we have anti-dust workshop for IML/IMD printing, Fixing and IML/IMD injection)
*** Advice the materials for the products: different parts needs different material according to application.
*** Your plan for total qty for this part, so that we can decide to make cavity numbers according to qty.
*** Surface requirement for parts should be advised so that we can know how to make the mold surface to realize the part surface. Generally
has many kinds of surface such as: Polishing, Sand blasting, Matt, Texture, Anodization...
OUR ADVANTAGE: WE WILL BOTH CONSIDER TO SAVE MOLD COST AND PRODUCT COST, SO YOUR INFORMATION IS VERY IMPORTANT FOR US.
Parts material | PP, ABS, PC, PC+ABS, PE, LDPE, PA66, POM, PMMA... customized material according to part application or use |
Mold Cavity | We decide the cavity according to customer's total qty planing and part construction. For example, if the part can be made in multi cavity, also the selling plan qty is quite big, then we will adapt multi cavity; even if the qty is big, but if the part size is quite big, we also can only make single cavity... so should be discussed. |
Gate | Subgate, Pin gate... according to product design |
Shot time | 10-120seconds according to product design, mold design |
Runner | Cold or hot runner, it depends on the material, cavity, part construction... so should be discussed |
Mold life | At least 300000 shots.Maximum can be 1,200,000 shots if with good maintence. |
Injection Machine | According to the part size and qty of cavity, we have machines from 60tons to 800 tons... |
Mold delivery time | 25-50 days including mold testing running around 2-3 times. |
Detailed Photos
Below we just show some parts pictures which we have made for some customers. We have made many automotive parts, medical parts, mechanical parts, electronic parts, home appliance parts, industry parts.
Certifications
Our factory has been certified by ISO association adn NAQ16949 for Auto parts
Company Profile
Cents is a factory with 20 years of experience in mold making and injection molding. Currently, the company and its factory covers an area of 13,000 square meters and has around 200 workers. Among them, 26 are design engineers and structural engineers. We have a complete mold production workshop, injection workshop, dust-free injection workshop, inspection room, warehouse, and assembly workshop. We have advanced EDM and WEDM mold production equipment imported from Japan. We have 46 injection molding machines, 19 of which are Japanese Sodick brand, in order to produce high-precision plastic products. Our products are widely used in the new energy automobile industry, medical industry, mechanical and machinery industry, home appliance industry and beauty industry. Among them, we are very professional and have rich experience in the production of negative pressure cups, tapping thread products and transparent acrylic products.
In 2019, we started to carry out the IMD/IML process and established an IMD/IML product production workshop, specifically for some customers who have very high requirements for product appearance and process.
Our factory has always adopted ISO 9001 as its operating principle. In terms of auto parts products, we have been certified by the 16949 organization and issued a 16949 certificate.
Our company only focuses on ODM/OEM design and production. Therefore, to provide customers with the best quality design, production and service is our company's core value requirements;
Our Advantages
***More than 40 sets injection machines;
***More than 20 engineers and 200 workers;
***One-stop service in making mold and molding;
***Anti-dust workshop for IMD/IML molded parts;
***Assembly line available for some finished parts;
***Most advanced equipment for EDM & WEDM, Sodick brand injection machine
Our Main Products
Customer Comments
ที่อยู่:
Room 301, No. 1, Zhenglongyi Road, Chang′an Town, Dongguan, Guangdong, China
ประเภทของธุรกิจ:
ผู้ผลิต/โรงงานผลิต
ขอบเขตธุรกิจ:
บริการ, อะไหล่และอุปกรณ์เสริมรถยนต์และมอเตอร์ไซค์, อุปกรณ์อิเล็กทรอนิกส์เพื่อการบริโภค, อุปกรณ์และส่วนประกอบอุตสาหกรรม, เครื่องจักรการผลิตและแปรรูป, เครื่องมือและฮาร์ดแวร์
การรับรองของระบบการจัดการ:
ISO 9001, ISO 14001, IATF16949
ผลิตภัณฑ์หลัก:
การผลิตแม่พิมพ์ฉีดพลาสติก , เครื่องมือฉีดพลาสติก , การฉีดชิ้นส่วนพลาสติก , การหล่อชิ้นส่วนพลาสติก , บริการหล่อชิ้นส่วนพลาสติก , ชิ้นส่วนหล่อพลาสติก , ชิ้นส่วนหล่อจากอุตสาหกรรม , ชิ้นส่วนหล่อจากอุตสาหกรรม , ชิ้นส่วนที่หล่อจากการแพทย์ , ชิ้นส่วนหล่ออิเล็กทรอนิกส์ , ชิ้นส่วนแบบหล่อ ABS PP PC PA66 POM
แนะนำบริษัท:
เซนต์เป็นโรงงานที่มีประสบการณ์หลายปีในการทำแม่พิมพ์และการหล่อแบบฉีด ปัจจุบันบริษัทและโรงงานมีพื้นที่ 13 000 ตารางเมตรและมีพนักงานประมาณ 200 คน ในจำนวนนี้มีวิศวกรออกแบบและวิศวกรโครงสร้างจำนวน 26 คน เรามีโรงงานผลิตแม่พิมพ์ที่สมบูรณ์แบบโรงงานฉีดสารหล่อโรงงานฉีดแบบไม่มีฝุ่นห้องตรวจสอบคลังสินค้า และการประชุมเชิงปฏิบัติการการประกอบ เรามีอุปกรณ์การผลิตแม่พิมพ์ EDM และ WEDM ขั้นสูงที่นำเข้าจากญี่ปุ่น เรามีเครื่องฉีดขึ้นรูป 46 เครื่องโดย 19 เครื่องเป็นแบรนด์ Japanese Sodick เพื่อผลิตผลิตภัณฑ์พลาสติกที่มีความเที่ยงตรงสูง ผลิตภัณฑ์ของเราถูกนำไปใช้อย่างแพร่หลายในอุตสาหกรรมยานยนต์พลังงานอุตสาหกรรมการแพทย์อุตสาหกรรมเครื่องจักรกลและเครื่องจักรอุตสาหกรรมเครื่องใช้ไฟฟ้าภายในบ้านและอุตสาหกรรมความงาม ในจำนวนนี้เรามีความเป็นมืออาชีพและมีประสบการณ์มากมายในการผลิตถ้วยตรวจวัดแรงดันที่เป็นลบผลิตภัณฑ์เกลียวและผลิตภัณฑ์อะคริลิกใส
ในปี 2019 เราเริ่มดำเนินการตามกระบวนการ IMD/IML และก่อตั้งศูนย์ปฏิบัติการการผลิตผลิตภัณฑ์ IMD/IML โดยเฉพาะสำหรับลูกค้าบางรายที่มีความต้องการสูงมากสำหรับรูปลักษณ์และกระบวนการผลิต
โรงงานของเราใช้ ISO 9001 เป็นหลักการทำงานเสมอ ในส่วนของผลิตภัณฑ์อะไหล่รถยนต์เราได้รับการรับรองจากองค์กร 16949 และออกใบรับรอง 16949
บริษัทของเรามุ่งเน้นเฉพาะการออกแบบและการผลิตของ ODM/OEM เท่านั้น ดังนั้นเพื่อให้ลูกค้าได้รับการออกแบบการผลิตและการบริการที่มีคุณภาพสูงสุดจึงเป็นสิ่งที่บริษัทของเราให้ความสำคัญเป็นหลัก