ไฟเหนี่ยวนำ LVD Magnetic Street 200W

40/80/120/150/200/300W Low Frequency 225kHz LVD Magnetic Induction lamps Street light
150W 12000Lm
Power: 40/80/120/150/200/300W
150W 12000Lm
Voltage: 120/220/277V AC
Lum: 2800-28050 Lm
Color Temperature: 2700-6500 K
CRI: > 80 Ra
Size: 179*114*89mm(40W) -- 280*140*98mm(80W)-351*140*98mm(120W)
351*140*98mm(150W) --L431*W148*H105mm(200W)
Frequency: 225kHz
Luminous efficiency: 80-85 Lm/W
Life Span: 100000h
Warranty; 5Years
Switch on/off less than 0.5 secs

The working principle of electromagnetic induction lamp:
It will transfer the supplied energy into the lamp by coupling the induction from an AC electric-magnetic field, and then create an electron avalanche of the inner filling gas to make it into plasma status.
When the excited atoms under plasma stuaus return to the ground state, it will emit UV radiation at 253.7nm.
The phosphor on the inner side of the bulb wall will get excited by this UV radiation at 253.7nm, and then create visible light.
The advantage of electromagnetic induction lamp:
Energy saving more than 75%;
Ultra-long life no replacement needed, save material and labor;
Environment friendly, using solid amalgam non-mercury pollution, meets the requirement of environmental protection;
Good color rendering, close to sunlight and protect the eyes;
No flash, no glare, protect the eyes not to be tired;
High power factor, few energy loss, energy-saving;
The life will not be affected even if switch on/off frequently, the light output will not decline as the fluorescent lamp during life time;
Good electrical specifications, use the IC chip design, high power factor, low current harmonics, steady voltage supplying, steady output of luminous flux;
Optional color temperature and natural color;
Can be made to colorful versions for wider application;
Instant start without preheating, Prevent from the illumination interrupt by the reason of power cut, it can quickly start, be suitable for the emergency lighting without preheating;
The electromagnetic interference (EMC) conforms to the IEC standard.