| บริการหลังการขาย: | ใช่ |
|---|---|
| ประกันสินค้า: | 12 เดือน |
| พิมพ์: | เครื่องกำเนิดไฟฟ้าดีเซลอัตโนมัติชนิดควบคุมด้วยคอมพิวเตอร์ขนาดเล็ก |
| วิธีการติดตั้ง: | แก้ไขแล้ว |
| สโตรก: | bangzhao หรือ OEM |
| วิธีการระบายความร้อน: | พัดลมเย็นลง |
ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว Introduction
All-in-one ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, off-grid inverter, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; photovoltaic controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system.
Technical Features IP54 outdoor type LiFePO4 lithium battery inverter charger with BMS system for solar energy storage:
1. Standardized components, modular architecture, easy for expansion
2. High energy density, small footprint, short construction period, strong environmental adaptability
3. Battery module within the layered stack design, with more than 10 years of long design life
4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH-500KWH optional
5. The use of international advanced Mitsubishi IPM module and intelligent power module, with high power fast adjustment capability
6. BMS battery management system with SOC automatic calibration and high current active balance function, combined with the perfect operation control and management strategies to achieve accurate and efficient management
7. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system
8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform
9. PV charge controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of PV modules and batteries
10. Colorful LCD display all module working information and status
| Model | SPVLI-30KWH-INV12KW | |
| Isolation mode | Low Frequency Transformer | |
| Inverter Part | ||
| Battery Input | Rated Voltage (Vdc) | 307VDC |
| Voltage range (Vdc) | 278-400V | |
| AC Output | Rated output power | 12KW |
| Output waveform | Pure Sine Wave | |
| Rated Voltage | 120/240VAC | |
| Phases | Split phase + N + PE | |
| Rated current (A) | 50A(Phase Current) | |
| Frequency | 60Hz | |
| Power Factor (PF) | >0.95 | |
| Inverter Efficiency | >92% | |
| Display | LCD+LED | |
| Overload Ability | 150%, 35 seconds | |
| AC-DC Charger Part | ||
| AC Input | Voltage range(Vac) | 180-240Vac |
| DC Output | Rated voltage(Vdc) | 330Vdc |
| Rated current(A) | 20A | |
| Lithium Battery Part | ||
| Cell/Number | 105AH/96PCS | |
| Rated voltage | 307V | |
| Max charge current | 20A | |
| Max discharge current | 100A | |
| Charge temperature range | 0ºC ~ 50ºC | |
| Discharge temperature range | -20ºC ~ 50ºC | |
| Cell charge end voltage | 3.6V | |
| Cell discharge end voltage | 2.7V | |
| Protection Function | Protection | Input reverse polarity, under voltage, over voltage, output over-current, short circuit, overheating etc. |
| Cooling method | Fan-cooled | |
| Degree of protection | IP20(indoor) or IP45(outdoor) | |
ซัพพลายเออร์ที่มีใบอนุญาตการทำธุรกิจ
ซัพพลายเออร์ที่ผ่านการตรวจสอบแล้ว 
